York · England
Bath re-enamelling & resurfacing in Stockton on the Forest, York
Full bath re-enamelling and resurfacing for homes and businesses in Stockton on the Forest and across York. Send pictures for a free, fixed quote.
- Resurfacing from £350
- Wear marks under the taps
- Brown or grey marks that don’t clean off
Bath re-enamelling in Stockton on the Forest without replacing anything
Re-enamelling works especially well on cast iron and steel, and acrylic baths can be resurfaced too. The result is a smooth, even, glossy finish. Typical jobs include chips and rust in more than one place and wear marks under the taps, in basins & shower trays, cast iron baths and Victorian roll-tops.
All our work is covered by our one-year guarantee.
- Where
- Stockton on the Forest (YO32)
- Area hub
- York
- Warranty
- 12 months on all our work
- Quotes
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
DIY repairs versus a professional job
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
The process
Nothing needs to be moved out of the room. Everything we use comes in the van with us, put protection down and get going once we’ve agreed what we are doing. Most jobs take the best part of a day, and you are welcome to carry on with your day while we work.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Preparing for the visit
- Have somewhere for us to park nearby if possible
- Avoid using the area for a few hours before we arrive
- Let us know which floor the room is on
How to get a price
Getting a price is easy: take a close-up of the damage and a picture from further back, send them to us with your postcode, and you’ll get a fixed quote back. There’s no charge for the quote and no obligation.
Advice
Landlord and trade work in Stockton on the Forest
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
Repairing versus replacing in Stockton on the Forest
A refit takes several trades and several days. Re-enamelling takes one technician and normally one day, with the bath ready the following day. Resurfacing from £350, with every job priced individually. Rather than charging by the hour, we price the entire job up front. It depends on the damage, the material and access, and doing several items at once reduces it.
What you get with us
- We come to you, anywhere in the UK
- We leave the room as we found it
- Every repair guaranteed for a year
- Everything repaired in place
See our full price list and resurfacing vs replacement cost guide.
Prices and what affects them
Resurfacing from £350. There are no hourly rates or hidden extras. The price is based on:
- What kind of damage it is
- What the surface is made of
- The size and number of damaged areas
- Where the damage is and how we get to it
There are no surprise extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.
Quotes from your pictures
Phone pictures are fine, there is no need for anything special. Just make sure we can see:
- The postcode, so we can plan the visit
- Natural light rather than flash
- Whether it’s been repaired or coated before
- A clear, close picture of the problem area
A quote takes minutes to ask for: photograph the damage, then the entire bath, include your postcode and send them to us. What comes back is a fixed quote, not a guess.
Our work in Stockton on the Forest
Stockton on the Forest is about 4 miles north-east of York, in York. Customers in Stockton on the Forest get the same service as everywhere else we cover: a fixed price from your pictures, then a visit to do the work. Stockton on the Forest is one of 79 places in York we cover. Our jobs stretch from Stockton on the Forest to Leeds (about 26 miles away).
We cover every part of the YO32 postcode area. Whether you live on Stone Riggs, Beanland Lane and The Village or anywhere nearby, we can come to you. We also travel to Hopgrove (1 mile south-west), Murton (2 miles south), Huntington (2 miles west), Grimston (2 miles south) and Derwenthorpe (3 miles south-west). We also work in nearby towns such as York (4 miles south-west), Clementhorpe (4 miles south-west), Bishophill (4 miles south-west), Hungate (4 miles south-west), Clifton (4 miles west) and Tang Hall (3 miles south-west).
Around Stockton on the Forest
Locally, our jobs take us to homes close to Stockton-on-the-Forest Primary School, Holy Trinity and The Fox pub. For rail, the closest station is York station, roughly 4.5 miles south-west of the centre. Other landmarks nearby include Craven Collection of Classic Motorcycles (0.6 miles south-west) and White Cross Court Rehabilitation Hospital (3.3 miles south-west). Open spaces near Stockton on the Forest include Kimberlow Hill.
Repairs by material
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. It must be solid and not flex underfoot for the finish to last.
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Also near Stockton on the Forest
Also in Stockton on the Forest
Signs you need bath re-enamelling in Stockton on the Forest
By the time a bath is a few decades old, it may have a mix of issues: worn patches, chips, rust spots and stains. Re-enamelling deals with all of them in one go.
Customers typically contact us about:
- Staining under the taps and around the waste
- Lots of chips and rust spots
- Thin, worn enamel in places
- A roll-top that’s seen better days
What to look for in a quote
- How soon you can use it again
- What aftercare is recommended
- What happens if the damage is worse than the photos show
- A fixed price, and whether VAT is included
Your questions about bath re-enamelling in Stockton on the Forest
Will the new finish last?
Look after it and it lasts. Avoid abrasive cleaners and suction mats.
Someone resurfaced my bath and it’s peeling. Can you help?
Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.
What happens if you find more damage?
Your quote covers the damage in the photos. Anything extra is discussed before we begin.
Will there be fumes?
A little, during the work. We set up ventilation and the smell fades as it cures.
Is it messy?
No. The work area is masked and covered, and we leave the room clean.
I’m a tenant. Can you help?
Of course. Check with your landlord; we can send the quote to them too.
Do you come to Stockton on the Forest?
Yes. We work across the UK and come to Stockton on the Forest. Send pictures and we will quote, or call 0345 017 0787.
Can you re-enamel a roll-top bath?
Yes. We can do the inside and outside.
Keeping it looking good
Simple care helps the repair last. Our advice:
- Leave the bath for the full curing time before using it
- Never use suction bath mats
- Do not leave a chip unrepaired
- Keep toiletries on a shelf rather than in the bath
A quick rinse and wipe after use helps, particularly where water is hard, to stop limescale building up.
On a worn bath, rust spots keep spreading, and each one adds to the preparation. It’s simpler to resurface before they spread.
About our accreditations · Every repair comes with a one-year guarantee.
