Hampshire · England
Bath re-enamelling & resurfacing in Stoke, Hampshire
Problem with your bath in Stoke? We put it right where it is, mix the colour on the day and back it with a one-year guarantee.
- Resurfacing from £350
- A peeling or bubbling previous coating
- Chips and rust in more than one place
Common problems we fix in Stoke
Sometimes it’s an earlier resurfacing that has failed, lifting by the plughole or blistering. Failing coatings are stripped back before we resurface.
If you can see any of these, send us a photo:
- A bath that stays dull however much you clean it
- Stains that won’t shift
- A coloured bath you want in white
- An old resurfacing that’s failing
Questions to ask before booking
- How the colour is matched
- How soon you can use it again
- Whether a trained technician does the job
- How changes to the job are handled
Bath re-enamelling in Stoke, done in place
Re-enamelling is a one-day job for most baths, with the bath ready to use the following day. Taps, tiles, panels and plumbing all stay in place. If you are dealing with a coloured bath you want in white and thin, worn enamel in places, we can help.
We stand behind the work with a one-year guarantee, so you are not left on your own once we have gone.
- Location
- Stoke (SP11)
- Region
- Hampshire
- Guarantee
- One year on every repair
- Price
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Stoke and nearby
Stoke is about 5 miles north-east of Andover, in Hampshire. Our repair technicians come to customers in Stoke and the surrounding area, so there’s no workshop to go to. Stoke is one of 683 places in Hampshire we cover. You can also see our page for London, about 60 miles away.
Postcode districts we cover here: SP11. From Chapel Lane, Crabtree Lane and Stoke Hill or anywhere nearby, a technician can come to you. Neighbouring places we cover include Hurstbourne Tarrant (2 miles north-west), Little London (2 miles south-west), Ibthorpe (2 miles north-west), Smannell (2 miles south-west) and Upper Enham (2 miles south-west). Further out, we also cover Basingstoke (14 miles east), Winchester (15 miles south), Andover (5 miles south-west), Tadley (14 miles north-east), Hyde (14 miles south) and Popley (15 miles east).
Near you in Stoke
We visit homes around St Mary Bourne Primary School and White Hart pub, among other places. For rail, the closest station is Whitchurch (Hampshire) station, roughly 4.1 miles south-east of the centre. Further afield, we also cover the area around Andover War Memorial Hospital (4.6 miles south-west) and Finkley Down Farm Museum (3.2 miles south-west). For a walk, there’s Anton Lakes and Sidown Hill.
Stoke questions
What happens next?
We check the damage, the material and your postcode, then reply with a quote.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
How long does re-enamelling last?
Look after it and it lasts. Avoid abrasive cleaners and suction mats.
Someone resurfaced my bath and it’s peeling. Can you help?
In most cases. We strip the failing coating and resurface it properly. Mention it when you send pictures.
Is there a guarantee?
Yes: twelve months. If there’s a problem with the work in that time, we come back and put it right.
How long will the bath be out of use?
One day for most baths, ready the day after. We will confirm timings when we quote.
Do I need to be at home?
Someone needs to let us in and show us the job. You don’t need to watch us work.
Do you come to Stoke?
Yes. We cover the entire UK and travel to Stoke and the rest of Hampshire. Send us photos for a fixed quote, or call 0345 017 0787.
Repairing versus replacing in Stoke
For a sound bath, resurfacing costs far less than replacement, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s much quicker too. Our bath re-enamelling starts from £350. We charge the same wherever you are, with no extra for Stoke. The job itself decides the price: the material, the amount of damage and how many items.
Why Stoke customers choose us
- Same prices wherever you are
- CHAS and Constructionline accredited
- Honest advice, even when it means no job
- Dust sheets down, tidy finish
See our prices page and resurfacing vs replacement cost guide.
How we price bath re-enamelling
Resurfacing from £350. Every quote is fixed and free. What we look at:
- The material and finish
- How many areas need work
- Doing more than one item at once
- Unusual colours or finishes
No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.
Getting a price from photos
When you take your photos, these tips help us give you a firm price:
- Something in shot to show the size
- One picture of the entire bath
- Your postcode, so we can check dates
- The material, if you know it
We price from photos so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.
Nearby places to Stoke
What else we do in Stoke
Different materials, different repairs
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s what we repair.
Aftercare tips
After the repair has cured, a few habits help it last:
- Don’t leave a chip unrepaired
- Keep suction mats out of the bath
- Wash away dyes and oils after use
- Stick to gentle, non-abrasive cleaners
Treat the new finish gently at first: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
On a worn bath, rust spots keep spreading, and each one adds to the preparation. Resurfacing before they spread keeps it simpler.
What happens on the day
Expect a friendly, tidy visit. We agree the arrival time in advance, cover and mask the work area, and get on with the job, which normally takes the best part of a day. If anything looks different from your photos, we’ll talk to you before going ahead.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Getting ready for the visit
- Have somewhere for us to park nearby if possible
- Keep pets and children out of the room while we work
- Clear the area around the damage
Get a quote
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can price the job.
Read more
DIY repairs versus a professional job
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
Honest limits
To be straight with you, some problems need a different fix:
- A bath that’s rusted through
- A bath split right through the body
- An acrylic bath that flexes badly underfoot
Send us photos and we will tell you honestly before you book.
Materials we work on in Stoke
- Basins & shower trays
- Cast iron baths
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
About our accreditations · Every repair comes with a one-year guarantee.
