Hampshire · England
Bath Re-enamelling for Finkley homes
Bath re-enamelling in and around Finkley: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- Wear marks under the taps
- A bath in a colour that no longer suits

How we handle bath re-enamelling in Finkley
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. We are often asked to fix chips and rust in more than one place and an old resurfacing that’s failing, on cast iron baths, basins & shower trays and acrylic baths.
The work is covered for a year after we finish. Just call us if there’s a problem and we will come back.
- Location
- Finkley (SP11)
- Region
- Hampshire
- Guarantee
- A year, on every repair
- Price
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026

What a repair can’t fix
We would rather lose a job than do one that won’t last, so here’s what a repair cannot put right:
- A cast iron or steel bath that is cracked right through
- Steel that has corroded right through
- A poorly supported acrylic bath, until it’s firmed up
Send us photos and we’ll tell you honestly.
What we work on
- Pressed steel baths
- Victorian roll-tops
- Cast iron baths
- Acrylic baths
- Basins & shower trays
Keeping it looking good
How the surface is treated afterwards matters:
- A quick wipe after use keeps limescale away
- Do not use the bath until it has fully cured
- Never use suction bath mats
- Store bottles off the bath
Rinse away dyes, oils and bath bombs straight after use, as they can stain. Fix dripping taps quickly.
Rust spots on a worn bath get worse with time. Resurfacing before they spread keeps it simpler.
Should I try a DIY kit first?
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is normally the cheaper route.
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it won’t stop us repairing it. Just mention it when you send photos, as it can add time.
How we price bath re-enamelling
Resurfacing from £350. There is no area surcharge for Finkley. What changes the price is:
- Whether it’s a chip, crack, burn or wear
- Any earlier repairs that need removing first
- The size and number of damaged areas
- How many items we do on one visit
There are no surprise extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Send pictures for a quote
Phone pictures are fine. Ensure they show:
- One sharp close-up of the damage
- Whether it’s been repaired or coated before
- Any details about the material
- Where you are, by postcode
To get a price, send two or three photos through our quote form or ring us. We will say straight away if a repair is the right fix.
How it works
You don’t need to empty the room. We bring everything we need with us, put protection down and get going once we’ve agreed what we’re doing. Most jobs take the best part of a day, and you are welcome to carry on with your day while we work.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
How to prepare
- Avoid using the area for a few hours before we arrive
- Have somewhere for us to park nearby if possible
- Let us know about parking or access
Ask for a price
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we will send back a fixed quote and some dates.
Advice
Work for landlords and builders
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
Do you need bath re-enamelling in Finkley?
A dull surface stains and holds dirt, and scrubbing it wears it down further. At that stage, resurfacing is the fix.
If you can see any of these, send us a picture:
- A coating lifting around the plughole
- Several chips and rust patches
- A bath in a colour that no longer suits
- A roll-top that’s seen better days
Comparing quotes
- What the guarantee covers, and for how long
- How the room is protected while they work
- How changes to the job are handled
- How soon you can use it again
About Finkley
Finkley is about 2 miles north-east of Andover, in Hampshire. Customers in Finkley get the same service as everywhere else we cover: a fixed price from your photos, then a visit to do the work. Finkley is one of 683 towns and villages in Hampshire we cover. Our nearest city page is London, about 61 miles away.
Jobs in SP11 are booked in the same way as anywhere else. Neighbouring places we cover include Smannell (1 mile north-west), Finkley Down (1 mile south), Picket Piece (1 mile south-east), East Anton (1 mile south-west) and Little London (1 mile north-west). Larger places within reach include Basingstoke (15 miles east), Winchester (13 miles south-east), Hyde (13 miles south-east), Tidworth (9 miles west), Weeke (12 miles south-east) and Kempshott (13 miles east).
Near you in Finkley
In Finkley, that means homes near The Oak pub, Christ Church and Winton Community Academy, among other places. Finkley’s nearest station is Andover station, about 2.4 miles south-west. Nearby you will also find Finkley Down Farm Museum (0.8 miles south) and Andover War Memorial Hospital (2.4 miles south-west). Green spaces nearby include Mill Lake and Anton Lakes.
Your questions about bath re-enamelling in Finkley
Do I need to be at home?
We need someone to let us in. After that, you can carry on with your day.
What do you need from me?
Send pictures through the quote form or call 0345 017 0787, and we will do the rest.
Can you do the outside of a roll-top?
Yes. Inside and out if you’d like.
Will the new finish last?
It depends on preparation, use and care. With good preparation and gentle cleaning it lasts a long time, and our work is guaranteed for a year.
Can landlords book you?
Yes. We work for landlords, agents, builders and businesses as well as householders in Finkley.
Can you make a coloured bath white?
Yes, most people go for white. Tell us what you’d like when you ask for a quote.
Do you cover Finkley?
Yes. We work across the UK and travel to Finkley. Send us photos for a fixed quote, or call 0345 017 0787.
Is it OK to have pets in the house?
Just keep them out of the work area. We’ll let you know when it’s safe to use again.
What your bath is made of matters
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s the part we put right.
Nearby places to Finkley
Also in Finkley
About our accreditations · Every repair comes with a one-year guarantee.

