Shropshire · England
Bath Re-enamelling in Stoke St Milborough
Damaged bath in Stoke St Milborough? We put it right where it is, match it on site and guarantee the work for a year.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- A bath in a colour that no longer suits
Common questions in Stoke St Milborough
What happens next?
We check the damage, the material and your postcode, then reply with a quote with dates.
Is there a smell?
Some odour is normal while we spray, which is why we ventilate the bathroom. It clears as the finish cures.
Does the bath have to be removed?
No. We resurface it in place, so nothing else is disturbed.
Do you charge for travel?
There is no separate call-out charge. The fixed price covers the visit and the work.
Is it worth repairing rather than replacing?
Generally, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we will say so.
Is the work guaranteed?
All our work carries our one-year guarantee. We’ll explain what it covers when we quote.
What information do you need?
A close-up, a wider photo and your postcode. After that, we just agree a date.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Include photos of each item.
Bath re-enamelling in Stoke St Milborough without replacing anything
Cast iron and steel baths are ideal for re-enamelling, and we can resurface acrylic baths as well. The result is a smooth, even, glossy finish. Whether it’s an outdated colour you’d like to change and chips and rust in more than one place, we can usually put it right, on acrylic baths, cast iron baths and basins & shower trays alike.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Location
- Stoke St Milborough (SY8)
- County
- Shropshire
- Guarantee
- One year on every repair
- Quotes
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Towns and villages near Stoke St Milborough
What else we do in Stoke St Milborough
Stoke St Milborough and the surrounding area
Stoke St Milborough is about 11 miles south-west of Bridgnorth, in Shropshire. Jobs in Stoke St Milborough are booked in like any other job: a fixed quote from photos, and a technician at your door on the day. Stoke St Milborough is one of 433 places in Shropshire where we work. Our jobs stretch from Stoke St Milborough to Birmingham (31 miles away).
Our visits in SY8 are booked in the same way as anywhere else. Close by, we cover Loughton (3 miles east), Cleeton St Mary (3 miles south-east), Bitterley (3 miles south), Hayton's Bent (3 miles south-west) and Burwarton (3 miles north-east). We also work in nearby towns such as Bridgnorth (11 miles north-east), Ludlow (6 miles south-west), Broseley (14 miles north-east), Church Stretton (10 miles north-west), Craven Arms (8 miles west) and Much Wenlock (11 miles north).
Near you in Stoke St Milborough
Around Stoke St Milborough, we work in homes near Church of St Milburga, among other places. A little further out are Broncroft Castle (2.9 miles north-west) and Ludlow Community Hospital (5.7 miles south-west). Open spaces near Stoke St Milborough include Brown Clee Hill and Catherton Common.
Landlord and trade work in Stoke St Milborough
We carry out planned and one-off repairs for housing associations and facilities teams in Shropshire and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
How it works
The work is clean and fairly quiet. We protect the area first, then the work takes the best part of a day. Before we leave, we explain the curing time and the aftercare.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the day after.
Preparing for the visit
- Plan for the room to be out of bounds to pets and children
- Tell us about any previous repairs or coatings
- Open a window if you can
Getting a price
We price from pictures so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you will get a fixed figure back.
Advice
Repairs by material
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s the part we put right.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Should I try a DIY kit first?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.
Honest limits
A repair is not always the answer, and we would rather say so up front. We can’t fix:
- A bath that’s rusted through
- Acrylic that moves when you stand in it
- Damage hidden under a previous coating, until it’s stripped back
If in doubt, send photos and we will say what we think before you book.
Materials we repair
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
Keeping it looking good
Much of the damage we repair could have been avoided. These habits help:
- Use washing-up liquid and a soft cloth
- Keep suction mats out of the bath
- Respect the curing time we give you
- Have chips seen to early
Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Fix dripping taps quickly.
If a previous coating is starting to peel, do not pick at it. Water gets under it and the damage spreads, so have it stripped and resurfaced.
How we price bath re-enamelling
Resurfacing from £350. There’s no charge for travel to Stoke St Milborough. The price depends on:
- The size and number of damaged areas
- The colour and finish to match
- Whether old repairs or coatings need taking off
- What kind of damage it is
Every job is a little different, so we price each one individually. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.
Send pictures for a quote
It only takes a minute to photograph the damage. Try to send:
- The postcode, so we can plan the visit
- Details of any past repairs
- Daylight if possible, and no flash reflection
- Something in shot to show the size
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them to us. You will get a fixed quote, not an estimate.
Common problems we fix in Stoke St Milborough
Enamel does not fail overnight. Years of cleaning, hard water and hot baths wear the gloss away, starting where water runs and sits.
You may need us if you’ve spotted:
- Lots of chips and rust spots
- Brown or grey marks that do not clean off
- A bath that stays dull however much you clean it
- A period or roll-top bath worth keeping
What to look for in a quote
- Whether cleaning and preparation are in the price
- What the guarantee covers, and for how long
- Whether the price covers travel
- What happens if they find more damage
About our accreditations · Every repair comes with a one-year guarantee.
