Derbyshire · England
Bath Re-enamelling for Stone Edge homes
Damaged bath in Stone Edge? We put it right where it is, mix the colour on the day and back it with a one-year guarantee.
- Resurfacing from £350
- A period or roll-top bath worth keeping
- Chips and rust in more than one place
For landlords and businesses
If you manage property in Stone Edge, we’ll quote for several properties at once. Send pictures for each one and we’ll price them together.
For developers and builders, we fix damage before handover, saving last-minute replacements. Several plots can be done in one visit to keep costs down.
Bath re-enamelling in Stone Edge, done in place
Cast iron and steel baths are ideal for re-enamelling, and acrylic baths can be resurfaced too. The result is a smooth, even, glossy finish. If you’re dealing with chips and rust in more than one place and brown or grey marks that don’t clean off, we can help, whatever the material.
Peace of mind is built in: each job carries a one-year guarantee, and we explain what it covers before you book.
- Where
- Stone Edge (S45)
- County
- Derbyshire
- Cover
- One year on every repair
- Quotes
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Prices and what affects them
Resurfacing from £350. You won’t pay by the hour. The price depends on:
- How many items we do on one visit
- Access to the area
- The size and number of damaged areas
- Unusual colours or finishes
A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send pictures and you’ll get a fixed figure.
How to get a fixed quote
Phone pictures are fine, there’s no need for anything special. Make sure they show:
- A picture taken from further back
- What it’s made of, if you know
- The postcode, so we can plan the visit
- Good light, ideally daylight, without flash glare
For a price in Stone Edge, photos are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
How the visit works
Here’s how a visit usually runs: we arrive at the agreed slot, protect everything around the work area, do the job and tidy away. Plan for a full day. Before we go, we’ll explain how long to leave it and how to care for it.
- First we protect the bathroom and set up ventilation.
- Next we degrease the bath and fix chips and rust spots.
- We key the surface and put on a bonding primer.
- We spray several coats of new enamel finish.
- The bath is left to cure and can normally be used the day after.
Preparing for the visit
- Let us know about parking or access
- Avoid using the area for a few hours before we arrive
- Keep a parking space free if you can
Get a quote
There is no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will reply with a fixed price.
Related advice
Nearby places to Stone Edge
More services for Stone Edge
Your questions about bath re-enamelling in Stone Edge
What if the damage is worse than the pictures show?
We will show you and explain before doing anything extra. Nothing extra is done without your say-so.
How do I get a price for bath re-enamelling in Stone Edge?
Prices start from £350. Every job gets a fixed quote based on photos of the damage. Send a close-up of the damage and a wider photo and your postcode.
Is it OK to have pets in the house?
Please keep children and pets out of the room during the visit and until it has cured. The rest of the house is unaffected.
Do you work for landlords and businesses?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses across Derbyshire.
Can you fix a peeling bath coating?
Yes. Removing the old finish takes extra time, which we include in the price.
How soon can you come?
It depends on the time of year and where you are. We’ll offer you dates when we send your quote.
Is it messy?
We protect the room with dust sheets and masking first, and we clean up when we have finished.
Can you redo someone else’s repair?
Typically, yes. The old repair comes out first, so mention it when you send pictures.
Materials and what they mean for the repair
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. The bath needs to be firm and well supported for the finish to last.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Aftercare tips
Most damage we see is avoidable. A few tips:
- Never use suction bath mats
- Dry the bath after use to stop limescale
- Leave the bath for the full curing time before using it
- Store bottles off the bath
Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Fix dripping taps quickly.
Rust spots on a worn bath get worse with time and make the job bigger. Resurfacing before they spread keeps it simpler.
About Stone Edge
Stone Edge is about 4 miles south-west of Chesterfield, in Derbyshire. Wherever you are in the S45 postcode area, we come to you. Stone Edge is one of 532 towns and villages in Derbyshire we cover. We work right across the region, from Stone Edge to Manchester (about 36 miles away).
Our technicians cover all of the S45 postcode area. If you are just outside Stone Edge, we cover Spitewinter (1 mile east), Northedge (2 miles south-east), Bole Hill (2 miles south-east), Kelstedge (2 miles south) and Press (2 miles south-east). We also work in nearby towns such as Chesterfield (4 miles north-east), Belper (12 miles south), Heanor (14 miles south-east), Dronfield (7 miles north), Ripley (11 miles south) and Bolsover (9 miles east).
Around Stone Edge
Around Stone Edge, we work in homes near Red Lion pub, among other places. The nearest railway station is Chesterfield station, roughly 4.2 miles north-east. Nearby you will also find Walton Hospital (2.8 miles north-east). The countryside around Stone Edge includes Beeley Moor.
Can I fix it myself?
A DIY attempt is not a disaster. We remove the old filler and start again, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send photos.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
When a repair isn’t the answer
Before booking, it’s worth knowing the limits:
- An acrylic bath that flexes badly underfoot
- Problems we cannot see until an old finish comes off
- A cast iron or steel bath that is cracked right through
Send us photos and we will tell you honestly.
Surfaces we repair
- Cast iron baths
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
- Victorian roll-tops
Signs you need bath re-enamelling in Stone Edge
The gloss on enamel is thin, and abrasive cleaning slowly wears it away. Eventually the surface turns porous and stains.
Typical reasons for a call-out include:
- Staining under the taps and around the waste
- Lots of chips and rust spots
- A bath in a colour that no longer suits
- A period or roll-top bath worth keeping
What to look for in a quote
- Is the price fixed, and does it include VAT?
- How your room will be protected
- What prep work is covered
- Whether the price covers travel
About our accreditations · Every repair comes with a one-year guarantee.
