Derbyshire · England
Bath Repair for Stone Edge homes
Damaged bath in Stone Edge? We repair it in place, mix the colour on the day and guarantee the work for a year.
- Repairs from £95
- Damage done while the bathroom was being fitted
- A failed DIY repair that’s discoloured or lifting
When a repair is not the answer
Some jobs are not right for a repair, including:
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Cracks in parts of an acrylic bath we can’t get to from below
- Water coming from the waste or taps rather than the bath
Send us pictures and we’ll tell you honestly before you book.
Materials we work on in Stone Edge
- Roll-top & freestanding
- Pressed steel enamel
- Acrylic
- Whirlpool & spa baths
- Cast iron enamel
Bath repair at your home in Stone Edge
A repair fixes just the damaged area and blends it into the rest of the bath, which costs far less than replacing a fitted bath. You can typically use the bath the day after. Typical jobs include scuffs and scratches in the surface and damage beneath the taps, across pressed steel enamel, whirlpool & spa baths and cast iron enamel.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Area
- Stone Edge (S45)
- County
- Derbyshire
- Guarantee
- 12 months on all our work
- Quote
- From £95. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Nearby places to Stone Edge
Also in Stone Edge
Repairing versus replacing in Stone Edge
A new bath brings a chain of other jobs: the tiles sitting on the rim tend to break, a new panel is frequently needed, and the plumbing has to be disconnected and refitted. Repairing the damage avoids all of that. Repairs from £95, with every job priced individually. Set against the cost of replacement, a repair is typically a fraction of the price, because there’s no removal, plumbing or making good. The quote lists exactly what you’re paying for.
Why us?
- Honest advice, even when it means no job
- No extra charge for your area
- Rooms protected and left tidy
- A year’s guarantee on all work
See our prices page or resurfacing vs replacement cost guide.
Different materials, different repairs
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s the part we put right.
Acrylic
Acrylic baths are moulded sheet reinforced underneath. They do not rust, but they can crack, scratch or be holed, and cracks need support from behind to stay fixed.
FAQs for Stone Edge
Can landlords book you?
Yes. We work for landlords, agents, builders and businesses as well as householders.
Do you cover the whole of Derbyshire?
We work UK-wide, and that includes Stone Edge. Prices don’t change with location.
Do you repair coloured baths?
Yes. The colour is mixed on site to suit your bath, including pastel and older colours.
Is my repair covered?
All our work carries a one-year guarantee. Ask us what it covers when you get your quote.
What happens next?
You get a fixed quote and available dates. If anything’s unclear, we’ll ask for another photo.
What about rust by the waste?
Yes. We remove the rust and loose enamel, seal and fill the area, then colour-match the finish.
Can you redo someone else’s repair?
Yes, we frequently do. It can add a little time, which we include in the quote.
Is it safe with children and pets around?
Just keep them out of the work area. We’ll let you know when it’s safe to use again.
Do you need bath repair in Stone Edge?
The usual cause is something heavy dropped into the bath, and a lot happen during bathroom refits. Cracks in acrylic have a different cause: poor support underneath, so the bath flexes when it’s full.
Signs it’s time to call us include:
- A chip where the taps sit
- Hairline or through cracks in acrylic
- Snagging damage from a refit
- Scuffs and scratches in the surface
What your quote should include
- Whether the price is fixed and includes VAT
- Whether the colour is mixed to match
- What preparation is included
- When it can be used again
Covering Stone Edge
Stone Edge is about 4 miles south-west of Chesterfield, in Derbyshire. Clients in Stone Edge get the same service as everywhere else we cover: a fixed quote from photos, then a visit to do the work. We work in all 532 towns and villages across Derbyshire. We work right across the region, from Stone Edge to Manchester (about 36 miles away).
We work across the S45 postcode area and the streets around it. Neighbouring places we cover include Spitewinter (1 mile east), Northedge (2 miles south-east), Bole Hill (2 miles south-east), Kelstedge (2 miles south) and Press (2 miles south-east). Larger places within reach include Chesterfield (4 miles north-east), Belper (12 miles south), Heanor (14 miles south-east), Dronfield (7 miles north), Ripley (11 miles south) and Bolsover (9 miles east).
What’s near Stone Edge
In Stone Edge, that means homes near Red Lion pub. The closest station to Stone Edge is Chesterfield station, roughly 4.2 miles north-east of the centre. A little further out are Walton Hospital (2.8 miles north-east). Not far away are Beeley Moor.
Landlords, agents and businesses in Stone Edge
If you manage property in Stone Edge, we can repair and quote for several addresses together. Just send pictures for each address and we will price them together.
We regularly work with letting and managing agents. Send the address, pictures and access details.
How it works
Arrival times are agreed in advance. Once we’re there, the work takes a morning or an afternoon for most jobs. The room is left tidy and you’ll know when it can be used.
- First, the area is cleaned and any loose enamel or rust is removed.
- Next we fill the damage and sand it smooth and level.
- We mix the colour on the day to match your bath’s exact shade.
- We apply the finish coats and polish the repair so it blends in.
- Once it has cured, normally by the following day, the bath is ready to use.
Preparing for the visit
- Tell us if there are stairs or a lift
- Keep a parking space free if you can
- Mention any earlier repairs or resurfacing
Getting a price
If you are in Stone Edge and want a price, the easiest route is pictures: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Read more
What bath repair costs
Repairs from £95. We price every job individually. What matters most is:
- The type of damage
- Where the damage is and how we get to it
- How much damage there is
- Unusual colours or finishes
The price reflects the work involved, not where you live. You will see the full price before booking, with nothing added on the day.
Send photos for a quote
Before you send pictures, these tips help us give you a firm price:
- One sharp close-up of the damage
- Daylight if possible, and no flash reflection
- Something in shot to show the size
- Any earlier repairs or coatings
We price from photos so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you will get a fixed figure back.
Looking after it afterwards
Aftercare is simple, and it makes a real difference:
- Keep abrasive pads and gritty cleaners away from the bath
- Give the bath a quick rinse after use
- If an acrylic bath flexes, have its feet adjusted
- Use a soft cloth and washing-up liquid for everyday cleaning
There’s nothing special to do after a repair, just sensible cleaning. Skip bleach and gritty creams and give it a rinse after each bath.
Tape over a fresh chip or crack until it’s repaired, so water cannot get in. Take it off before we arrive.
About our accreditations · Every repair comes with a one-year guarantee.
