Staffordshire · England
Bath re-enamelling & resurfacing in Little Stoke, Staffordshire
Bath re-enamelling in and around Little Stoke: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- A peeling or bubbling previous coating
- An outdated colour you’d like to change
Repair or replace in Little Stoke?
Replacing a bath generally involves a plumber, a fitter and a tiler. Re-enamelling takes one technician and usually one day, and the bath can be used the day after. Prices start from £350. No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
Why Little Stoke customers choose us
- We come to you, anywhere in the UK
- Accredited with CHAS, Constructionline and SafeContractor
- One-year guarantee on every repair
- Colour-matched on site
See our prices page and guide to resurfacing and replacement costs.
How we handle bath re-enamelling in Little Stoke
After cleaning, repairing and priming, we spray on the new finish. Most of the work, and most of the durability, is in the preparation, so we don’t cut corners on it. Common call-outs are for brown or grey marks that don’t clean off and a period or roll-top bath worth keeping, in acrylic baths, cast iron baths and Victorian roll-tops.
Every job is backed for twelve months, and the guarantee is the same wherever you live. We return to put right any problem with the work.
- Where
- Little Stoke (ST15)
- County
- Staffordshire
- Cover
- 12 months on all our work
- Quotes
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Little Stoke and nearby
Little Stoke is about 1 mile south-east of Stone, in Staffordshire. Book a date that suits you, and you will know when to expect us, so you’re not left waiting in all day. Little Stoke is one of 512 places in Staffordshire we cover. We work right across the region, from Little Stoke to Birmingham (31 miles away).
Our visits in ST15 are booked in the same way as anywhere else. Whether you live on Gower Road, Jervis Road and Pingle Lane or anywhere nearby, a technician can come to you. Nearby, we also work in Stone (1 mile north-west), Aston-by-Stone (1 mile south), Cold Norton (2 miles west), Marston (3 miles south) and Yarnfield (3 miles west). We also work in nearby towns such as Stafford (6 miles south), Newcastle-under-Lyme (10 miles north-west), Cannock (14 miles south), Longton (7 miles north), Rugeley (12 miles south-east) and Leek (15 miles north).
Near you in Little Stoke
Typical jobs here are in homes near The Swan Public House, St Michael's CofE (C) First School and Alleyne's Academy. The nearest railway station is Stone station, about 1.6 miles north-west. Nearby you’ll also find St George's Hospital (5.6 miles south).
Honest limits
Honesty matters more than a booking, so here’s what a repair can’t fix:
- Acrylic that moves when you stand in it
- A bath that’s rusted through
- Leaking taps or wastes (a plumber’s job)
Send us pictures and we’ll tell you honestly.
Surfaces we repair
- Pressed steel baths
- Acrylic baths
- Cast iron baths
- Basins & shower trays
- Victorian roll-tops
Should I try a DIY kit first?
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is generally cheaper.
How to care for the repair
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Have chips seen to early
- Dry the bath after use to stop limescale
- Use washing-up liquid and a soft cloth
- Rinse off hair dye, oils and bath bombs right away
Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Repair dripping taps promptly.
On a worn bath, rust spots keep spreading. It’s simpler to resurface before they spread.
What we do, step by step
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, protect the area, then carry out the work, which generally takes most of the day. If anything looks different from your photos, we’ll talk to you before going ahead.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Avoid using the area for a few hours before we arrive
- Make sure the room can be ventilated
- Tell us about any previous repairs or coatings
How to get a price
For a price in Little Stoke, the easiest route is photos: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Related advice
FAQs for Little Stoke
Can you change the colour of my bath?
Yes. We can resurface a coloured bath in white, and we can do the rest of the suite as well.
What happens if you find more damage?
It’s rare, but if it happens we talk to you first. The price only changes if you agree.
Is the work guaranteed?
All our work carries a one-year guarantee. We’ll explain what it covers when we quote.
Do you cover the whole of Staffordshire?
Everywhere in the UK, Little Stoke included. Travel is included in the price.
How long is the bath unusable?
Typically a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
Is it worth repairing rather than replacing?
Normally, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. We’ll tell you honestly if replacement makes more sense.
What does bath re-enamelling cost?
Resurfacing from £350. We give a fixed quote from your photos. Send a close-up of the damage and a wider photo with your ST15 postcode.
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time that suits you.
For landlords and businesses
Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
Builders use us to fix snagging damage before handover, saving last-minute replacements. We can visit several plots in one trip.
Do you need bath re-enamelling in Little Stoke?
Once enamel loses its gloss, it stains more easily, and scrubbing it wears it down further. At that stage, resurfacing is the fix.
Customers usually contact us about:
- Thin, worn enamel in places
- Brown or grey marks that do not clean off
- Several chips and rust patches
- A dull, rough surface that won’t come clean
Questions to ask before booking
- How soon you can use it again
- What prep work is covered
- The length of the guarantee and what it covers
- What aftercare is recommended
What your bath is made of matters
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Rust around the waste is common on steel, so we check it carefully.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Also near Little Stoke
What else we do in Little Stoke
About our accreditations · Every repair comes with a one-year guarantee.
