Nottingham · England
Bath Re-enamelling in Strelley
Problem with your bath in Strelley? We put it right where it is, match it on site and back it with a one-year guarantee.
- Resurfacing from £350
- Chips and rust in more than one place
- Thin, worn enamel in places
Do you need bath re-enamelling in Strelley?
A dull surface stains and holds dirt, and cleaning harder only makes it worse. At that stage, resurfacing is the fix.
People normally call us when they notice something like this:
- Several chips and rust patches
- A roll-top that’s seen better days
- A coloured bath you want in white
- Stains that won’t shift
What your quote should include
- If travel is included in the price
- What preparation is included
- The length of the guarantee and what it covers
- How long it needs to cure
How we handle bath re-enamelling in Strelley
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. Several coats of finish go on over a bonding primer, after the bath has been cleaned, repaired and keyed. If you are dealing with an original cast iron bath that needs restoring and worn patches where water runs and sits, we can normally put it right.
Peace of mind is built in: each job carries a one-year guarantee, and we explain what it covers before you book.
- Area
- Strelley (NG8)
- Region
- Nottingham
- Guarantee
- A year, on every repair
- Price
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
How it works
Here’s how a visit generally runs: we arrive at the agreed slot, protect everything around the work area, do the job and tidy away. Plan for the best part of a day from start to finish. Before leaving, we tell you when it can be used and what to avoid for the first few days.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures until the day after.
How to prepare
- Let us know about parking or access
- Let us know if it has been repaired before
- Point us to the nearest place to park
Get a quote
To get a price, send two or three photos using our quote form or ring us. We will tell you honestly whether it can be repaired.
Read more
Honest limits
A repair is not always the answer, and we’d rather say so up front. We can’t fix:
- Damage hidden under a previous coating, until it’s stripped back
- An acrylic bath that flexes badly underfoot
- A bath split right through the body
If in doubt, send photos and we will say what we think.
What we work on
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
Why repair rather than replace?
There are times replacing is better: if the bath is cracked through, if you want a different size or shape, or if you’re refitting the whole room anyway. In most other cases, resurfacing is the better choice. Our bath re-enamelling starts from £350. We charge the same wherever you are, with no extra for Strelley. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Why Strelley customers choose us
- Colour mixed on the day to match
- Free fixed quotes from pictures
- No need to remove anything
- We’ll tell you if it’s not worth repairing
See our pricing and resurfacing vs replacement cost guide.
Materials and what they mean for the repair
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.
Should I try a DIY kit first?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
How to care for the repair
After the repair has cured, a few habits help it last:
- Leave the bath for the full curing time before using it
- A quick wipe after use keeps limescale away
- A dripping tap should be fixed promptly
- Avoid suction-cup mats
Rinse the bath and wipe it over after use, particularly where water is hard, so limescale cannot build up.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
For landlords and businesses
We work for landlords, letting agents and housing providers in Strelley as well as homeowners. Repairing between tenancies keeps void periods short, and it typically costs far less than a refit.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
Places near Strelley
What else we do in Strelley
Common questions in Strelley
I rent my home. Can I book you?
We’re happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.
Which areas do you work in?
We work UK-wide, and that includes Strelley. Prices do not change with location.
How do I book?
Use the quote form or ring 0345 017 0787.
Can landlords book you?
Yes. We work for landlords, agents, builders and businesses as well as householders in Strelley.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Is a repair better than a new one?
Usually, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. We will tell you honestly if replacement makes more sense.
When can you do it?
It depends on the time of year and where you are. Send pictures with your postcode and we will reply with the earliest dates.
How long will the bath be out of use?
Typically a day, then it’s ready to use the following day. A badly pitted bath can need a second day.
Where we work around Strelley
Strelley is about 3 miles east of Ilkeston, in Nottingham. We agree a date that works for you, and we’ll give you an arrival time in advance, so there is no waiting around. Strelley is one of 51 towns and villages in Nottingham where we work. Our jobs stretch from Strelley to Birmingham (about 44 miles away).
We work across NG8. Close by, we cover Broxtowe (1 mile south-west), Trowell Moor (1 mile south), Nuthall (1 mile north-east), Swingate (1 mile north) and Babbington (1 mile north-west). Within a short drive, we also cover Nottingham (3 miles east), Arnold (6 miles east), Bulwell (3 miles north-east), Sneinton (5 miles east), St Ann's (5 miles east) and Clifton (5 miles south-east).
Near you in Strelley
Locally, our jobs take us to homes close to Church of All Saints, Broad Oak pub and Melbury Primary School. Strelley’s nearest station is Ilkeston station, roughly 2.1 miles west of the centre. Other landmarks nearby include Kawasaki Museum (1.4 miles north-east) and Greasley Castle (3.3 miles north).
About our accreditations · Every repair comes with a one-year guarantee.
