Cambridgeshire · England

Bath Re-enamelling in Stretham

Damaged bath in Stretham? We put it right where it is, match it on site and guarantee the work for a year.

  • Resurfacing from £350
  • A bath that stays dull however much you clean it
  • Lots of chips and rust spots
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath re-enamelling in Stretham?

Common problems we fix in Stretham

In hard water areas, limescale and the cleaning it needs wear enamel faster, and gritty cleaners are the worst culprits.

The things customers generally mention when they call are:

  • Worn patches where water runs and sits
  • An outdated colour you’d like to change
  • A roll-top that is seen better days
  • Enamel that is lost its shine and feels rough

Comparing quotes

  • Whether the price covers travel
  • Whether they match the colour on site
  • Whether the price is fixed and includes VAT
  • How long the guarantee is and what it covers

How to compare quotes

Bath re-enamelling at your home in Stretham

Resurfacing renews the whole surface of the bath without a refit. It’s the answer when the whole bath is tired rather than one spot. If you’re dealing with chips and rust in more than one place and a bath in a colour that no longer suits, we can typically put it right.

We guarantee the work for a year. If something is not right in that time, we come back and put it right.

Roll-top bath being refinished by a Surface Doctor technician
Where
Stretham (CB6)
Region
Cambridgeshire
Guarantee
One year on every repair
Quote
From £350. Fixed and free, based on photos
Call
0345 017 0787
Last updated
23 October 2026

Why repair rather than replace?

Replacing the bath means a plumber, lifting out the old bath, making good the walls and tiles and several days without a working bathroom. Resurfacing renews the whole surface with the bath left where it is. Prices start from £350. A repair is priced on what needs doing, not where you live. You’ll see the full price before booking, with nothing added on the day.

What you get with us

  • Same prices wherever you are
  • Work done at your home or business
  • Most jobs done in one visit
  • Everything repaired in place

Read our full price list and guide to resurfacing and replacement costs.

DIY repairs versus a professional job

We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.

If you do try a kit, read the instructions carefully, and do not use it until it has fully cured. If it fails, we can still put it right.

Stretham and nearby

Stretham is about 4 miles south-west of Ely, in Cambridgeshire. Our repair technicians come to homes and businesses in Stretham and nearby villages, so you don’t need to take anything anywhere. Stretham is one of 371 towns and villages in Cambridgeshire where we work. You can also see our page for London, about 60 miles away.

Here we cover the CB6 postcode area. Streets in the area include High Street, Middle Close and Chapel Street. Other places close to Stretham include Little Thetford (2 miles north-east), Wilburton (2 miles west), Witchford (3 miles north), Chittering (3 miles south) and Haddenham (3 miles west). Larger places within reach include Cambridge (10 miles south), St Ives (13 miles west), Newmarket (10 miles south-east), Ely (4 miles north-east), March (15 miles north) and Cambourne (15 miles south-west).

Around Stretham

Typical jobs here are in homes near St James' Church, Stretham Community Primary School and Red Lion pub and the streets around them. The nearest railway station is Ely station, about 3.6 miles north-east. Other landmarks nearby include Princess of Wales Hospital (5.1 miles north-east) and Ely Castle (3.8 miles north-east). Open spaces near Stretham include Doghouse Grove and Fishing Lake.

Map of Stretham © OpenStreetMap contributors

What happens on the day

Visits start with a quick look at the job together. After that, protection goes down around the work area and the work begins. You can expect it to take most of the day, and we will tell you if anything changes.

  1. We check the bath and agree the finish with you.
  2. Everything around the bath is masked and covered.
  3. We degrease the bath, fix any damage and key the surface.
  4. We apply the primer and then the finish coats.
  5. We remove the masking, tidy up and give you the curing time.

Preparing for the visit

  • Move bottles, mats and clutter away from the area
  • Mention any earlier repairs or resurfacing
  • Tell us if there are stairs or a lift

Get a quote

Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can give you a fixed price without visiting.

Get a fixed price

Read more

Honest limits

It helps to know what we can’t do too:

  • Holes rusted through the metal
  • A poorly supported acrylic bath, until it’s firmed up
  • Problems we cannot see until an old finish comes off

If in doubt, send photos and we’ll say what we think.

Materials we repair

  • Victorian roll-tops
  • Pressed steel baths
  • Basins & shower trays
  • Cast iron baths
  • Acrylic baths

Work for landlords and builders

Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.

We are used to working with agents and managing companies. Just send pictures, the address and how to get access and we’ll arrange it.

Materials and what they mean for the repair

Pressed steel

Steel baths re-enamel well, once any rust has been treated. Rust around the waste is common on steel, so we check it carefully.

Acrylic

We resurface acrylic baths as well, using a system that bonds to acrylic. The bath needs to be firm and well supported for the finish to last.

Stretham: your questions answered

Do you cover the entire of Cambridgeshire?

We work UK-wide, so Stretham is covered. Our prices are the same everywhere.

Can pets and children be at home?

Just keep them out of the work area. We’ll let you know when it’s safe to use again.

Do you come to Stretham?

Yes. We cover the whole UK and travel to Stretham. Send us photos for a fixed quote, or call 0345 017 0787.

Do I need to be at home?

Yes. The technician needs access to the room for the visit, at a time we agree with you.

How long will the bath be out of use?

Typically a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.

How long does re-enamelling last?

A well-prepared finish lasts a long time if it’s looked after. Avoid abrasive cleaners and suction mats.

Can you fix a peeling bath coating?

Usually, yes. We strip the failing coating and resurface it properly. Mention it when you send pictures.

Is it messy?

We protect the room with dust sheets and masking first, and tidy up before we leave.

What bath re-enamelling costs

Resurfacing from £350. You won’t pay by the hour. The price depends on:

  • The material and finish
  • Whether we combine several jobs
  • How easy the damage is to reach
  • The colour and finish to match

There are no surprise extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.

Getting a price from photos

The better the pictures, the more accurate the price. Here’s what helps:

  • Your postcode, so we can check dates
  • A photo taken from further back
  • A coin beside the damage so we can judge size
  • One sharp close-up of the damage

There’s no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.