Devon · England
Bath re-enamelling & resurfacing in Talaton, Devon
Our repair technicians come to Talaton for full bath re-enamelling and resurfacing. Everything is done in place, and the work is guaranteed.
- Resurfacing from £350
- A roll-top that’s seen better days
- Thin, worn enamel in places
Materials and what they mean for the repair
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. The bath needs to be firm and well supported for the finish to last.
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Steel often rusts by the plughole, so we pay close attention there.
Bath re-enamelling in Talaton, done in place
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. Several coats of finish go on over a bonding primer, after the bath has been cleaned, repaired and keyed. Whether it’s a bath that stays dull however much you clean it and a coloured bath you want in white, we can help.
Your repair is guaranteed for a year, as with every job we do.
- Where
- Talaton (EX5)
- Area hub
- Devon
- Warranty
- One year on every repair
- Quote
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Questions from Talaton
What do you need from me?
Send photos through the quote form or call 0345 017 0787, and we will take it from there.
Do you come to Talaton?
Yes. We cover the whole UK and travel to Talaton. Send us photos for a fixed quote, or call 0345 017 0787.
How do I get a price for bath re-enamelling in Talaton?
Prices start from £350. We give a fixed price from your photos. Send a close-up of the damage and a wider photo and your postcode.
Will there be a smell?
A little, depending on the job. Open windows and an extractor fan help.
It’s been repaired before. Can you still fix it?
Generally, yes. Let us know what was used before.
What happens next?
We check the damage, the material and your postcode, then reply with a quote.
Someone resurfaced my bath and it’s peeling. Can you help?
Yes, we do this regularly. Removing the old finish takes extra time, which we include in the price.
Is it messy?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Looking after it afterwards
Simple care helps the repair last. Our advice:
- Don’t leave a chip unrepaired
- Keep suction mats out of the bath
- Dry the bath after use to stop limescale
- Use washing-up liquid and a soft cloth
Wait for the curing time we give you before the first bath. Then, gentle cleaning with a soft cloth is enough.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
Towns and villages near Talaton
What else we do in Talaton
Can I fix it myself?
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
If you’re set on a kit, follow its instructions closely, and do not use it until it has fully cured. If it fails, we can still put it right.
What happens on the day
When we visit, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. Expect it to take most of the day. We tidy up before we leave and let you know when you can use it again.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
How to prepare
- Have somewhere for us to park nearby if possible
- Tell us about parking, stairs or access
- Plan for the room to be out of bounds to pets and children
Ask for a price
For a price in Talaton, the easiest route is pictures: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.
Advice
Landlords, agents and businesses in Talaton
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We will fit around changeovers where we can.
Landlords, letting agents and housing providers in Talaton use us as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
Where we work around Talaton
Talaton is about 6 miles west of Honiton, in Devon. From the centre of Talaton to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. We work in 586 places in Devon.
We work across EX5. Nearby, we also work in Whimple (2 miles south-west), Aller Grove (3 miles south), Allercombe (3 miles south), West Hill (4 miles south) and Marsh Green (4 miles south-west). Larger places within reach include Exeter (10 miles south-west), Exmouth (12 miles south), Tiverton (11 miles north-west), Sidmouth (8 miles south-east), Honiton (6 miles east) and St Thomas (11 miles south-west).
Landmarks near Talaton
Locally, our jobs take us to homes close to Talaton Inn and Church of St James, among other places. For rail, the closest station is Feniton station, about 1.6 miles east of the centre. A little further out are Ottery Heritage Museum (3.1 miles south-east).
How we price bath re-enamelling
Resurfacing from £350. We charge the same across the UK, including Talaton. The price reflects:
- How many items we do on one visit
- Where the damage is and how we get to it
- How much damage there is
- The material
We charge the same wherever you are, with no extra for Talaton. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Getting a price from photos
When you take your pictures, a few simple things make all the difference:
- The postcode, so we can plan the visit
- Something in shot to show the size
- Any earlier repairs or coatings
- What it’s made of, if you know
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them to us. You will get a fixed price, not an estimate.
Signs you need bath re-enamelling in Talaton
A dull surface stains and holds dirt, and cleaning harder only makes it worse. That’s the point where re-enamelling makes sense.
It’s worth getting a quote if you see:
- A roll-top that’s seen better days
- A coating lifting around the plughole
- Thin, worn enamel in places
- Lots of chips and rust spots
What to look for in a quote
- Whether the colour is mixed to match
- How changes to the job are handled
- Whether a trained technician does the job
- What protection goes down before work starts
What a repair cannot fix
It helps to know what we cannot do too:
- A cast iron or steel bath that is cracked right through
- A poorly supported acrylic bath, until it’s firmed up
- A bath that’s rusted through
If in doubt, send pictures and we’ll say what we think.
Surfaces we repair
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
About our accreditations · Every repair comes with a one-year guarantee.
