Aberdeenshire · Scotland
Bath Re-enamelling in Tarves
Full bath re-enamelling and resurfacing for homes and businesses in Tarves and across Aberdeenshire. Send photos for a free, fixed quote.
- Resurfacing from £350
- A coloured bath you want in white
- An old resurfacing that’s failing
What your bath is made of matters
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is the part we put right.
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we check it carefully.
Bath re-enamelling in Tarves without replacing anything
Re-enamelling gives a worn bath a new glossy surface without a refit. It’s the answer when the whole bath is tired rather than one spot. Typical jobs include chips and rust in more than one place and thin, worn enamel in places, on cast iron baths, acrylic baths and basins & shower trays.
Peace of mind is built in: each job carries a one-year guarantee, and we explain what it covers before you book.
- Area
- Tarves (AB41)
- County
- Aberdeenshire
- Guarantee
- 12 months on all our work
- Quote
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
What we do, step by step
We work cleanly and quietly. We protect the area first, then the job itself takes the best part of a day. At the end we talk you through the curing time and the aftercare.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures until the next day.
How to prepare
- Have somewhere for us to park nearby if possible
- Mention any earlier repairs or resurfacing
- Tell us if there are stairs or a lift
Getting a price
There is no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed price.
Related advice
What bath re-enamelling costs
Resurfacing from £350. We do not charge extra for travel to Tarves. The price depends on:
- Whether we combine several jobs
- What kind of damage it is
- Access to the area
- Whether old repairs or coatings need taking off
The price depends on the type and amount of damage, the material and how many jobs we combine into one visit. We give a fixed quote from your pictures, so there are no surprises on the day.
How to get a fixed quote
Most quotes are done from photos alone. To make it quick:
- Something in shot to show the size
- A close-up of the damage, in focus
- Any details about the material
- Good light, ideally daylight, without flash glare
Send us a picture of the damage and a wider shot of the whole item, and tell us you’re in Tarves, and we will come back with a fixed quote.
Landlords, agents and businesses in Tarves
For anyone letting property in or around Tarves, we will quote for several properties at once. Send photos for each one and we’ll price them together.
Builders use us to fix snagging damage before handover, saving last-minute replacements. We can visit several plots in one trip.
About Tarves
Tarves is about 8 miles north-east of Inverurie, in Aberdeenshire. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. Tarves is one of 161 places in Aberdeenshire we cover.
All of AB41 is within our area. That includes homes on Stuart Crescent, Duthie Road and Braiklay Avenue and the roads around them. We also travel to Pitmedden (3 miles south-east), Udny Green (3 miles south), Methlick (4 miles north), Oldmeldrum (4 miles south-west) and Hattoncrook (4 miles south). Further out, we also cover Inverurie (8 miles south-west), Westhill (15 miles south), Ellon (6 miles east), Turriff (15 miles north-west), Garioch (8 miles south-west) and Kemnay (12 miles south-west).
Landmarks near Tarves
Around Tarves, we work in homes near Tarves Parish Church, among other places. Other landmarks nearby include Old School Museum (less than half a mile north-east) and Tillyhilt Castle (0.8 miles north-west). Not far away are Upper Lake.
DIY repairs versus a professional job
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it does not stop a professional repair. It does add a little time, so tell us about it when you send pictures.
Other services in Tarves
Looking after it afterwards
Most damage we see is avoidable. A few tips:
- Stick to gentle, non-abrasive cleaners
- Store bottles off the bath
- Get any chip repaired quickly
- Avoid suction-cup mats
Wait for the curing time we give you before the first bath. Then, gentle cleaning with a soft cloth is enough.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
Repair or replace: which is better?
Replacing a bath generally involves a plumber, a fitter and a tiler. Re-enamelling takes one technician and usually one day, with the bath ready the day after. Resurfacing from £350, with every job priced individually. A repair usually costs much less than people expect, especially compared with replacing and refitting. Send photos and we’ll give you the exact figure.
Why choose Surface Doctor in Tarves
- Every repair guaranteed for a year
- Fixed prices from your pictures
- We leave the room as we found it
- One visit for most repairs
See our prices page and bath cost comparison.
Common questions in Tarves
Can you quote from pictures?
Normally, yes. Clear photos let us give you a fixed quote without visiting.
Do you work for landlords and businesses?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
I rent my home. Can I book you?
Yes. Ask your landlord first, and we can send them the quote if that helps.
How do I book?
Just photos, your postcode and a contact number. On the day, we only need access to the room.
Which areas do you work in?
We work UK-wide, so Tarves is covered. Our prices are the same everywhere.
Will it make a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
What happens once I’ve sent pictures?
We check the damage, the material and your postcode, then reply with a quote and the next dates we have.
Will there be fumes?
Some odour is normal while we spray, which is why we ventilate the bathroom. It fades as the coating cures.
Signs you need bath re-enamelling in Tarves
Often the bath has just had decades of use, with nothing wrong except the surface. Underneath, a cast iron or steel bath is generally as strong as ever.
Look out for these signs:
- A roll-top that’s seen better days
- Brown or grey marks that do not clean off
- A coloured bath you want in white
- A bath that stays dull however much you clean it
Before you book anyone
- Whether cleaning and preparation are in the price
- How the colour is matched
- How to care for the finish
- What happens if they find more damage
About our accreditations · Every repair comes with a one-year guarantee.
