Aberdeenshire · Scotland
Bath Re-enamelling in Pitmedden
Fixed-price bath re-enamelling in Pitmedden and the surrounding area, normally in one visit.
- Resurfacing from £350
- A coating lifting around the plughole
- Enamel that’s lost its shine and feels rough
Honest limits
It helps to know what we can’t do too:
- Leaking taps or wastes (a plumber’s job)
- A poorly supported acrylic bath, until it’s firmed up
- Problems we cannot see until an old finish comes off
If in doubt, send photos and we will say what we think.
What we work on
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
- Cast iron baths
Bath re-enamelling in Pitmedden without replacing anything
Cast iron and steel baths are ideal for re-enamelling, and we can resurface acrylic baths as well. You end up with a smooth, glossy surface. Whether it’s staining under the taps and around the waste and worn patches where water runs and sits, we can help, whatever the material.
We guarantee the work for a year. If something is not right in that time, we come back and put it right.
- Area
- Pitmedden (AB41)
- Area hub
- Aberdeenshire
- Warranty
- One year on every repair
- Price
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Nearby places to Pitmedden
What else we do in Pitmedden
Repair or replace in Pitmedden?
A new bath means a plumber, removing a heavy bath, making good the walls and tiles and several days without a working bathroom. Re-enamelling gives the bath a new finish with the bath left where it is. Resurfacing from £350, with every job priced individually. We charge the same wherever you are, so there is no premium for Pitmedden. What changes the price is the job itself: the material, the amount of damage and how many items.
What you get with us
- One price list for the entire UK
- Free fixed quotes from pictures
- Colours mixed by hand to suit your surface
- One visit for most repairs
See our prices page and guide to resurfacing and replacement costs.
Aftercare tips
Aftercare is simple, and it makes a real difference:
- Wipe the bath dry after use in hard water areas
- Rinse off hair dye, oils and bath bombs right away
- Repair dripping taps early
- Don’t use the bath until it has fully cured
Rinse the bath and wipe it over after use, especially in hard water areas, so limescale cannot build up.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
Should I try a DIY kit first?
A DIY attempt is not a disaster. We remove the old filler and start again, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send pictures.
If you do try a kit, read the instructions carefully, and do not use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
Prices and what affects them
Resurfacing from £350. We charge the same across the UK, including Pitmedden. What changes the price is:
- How much damage there is
- How hard the colour is to match
- Previous DIY repairs that have to come out
- The type of damage
Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send pictures and we will give you the exact figure.
Quotes from your pictures
Most quotes are done from pictures alone. To help us price it:
- Daylight if possible, and no flash reflection
- Whether it’s been repaired or coated before
- The material, if you know it
- A clear, close picture of the problem area
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the whole bath, we can price the job without visiting.
Our work in Pitmedden
Pitmedden is about 8 miles north-east of Inverurie, in Aberdeenshire. Customers in Pitmedden get the same service as everywhere else we cover: a fixed quote from your photos, and a technician at your door on the day. Pitmedden is one of 161 places in Aberdeenshire we cover.
Here we cover the AB41 postcode area. We regularly work on streets such as Bronie Crescent, Oldmeldrum Road and Bronieside and the roads around them. Other places close to Pitmedden include Udny Green (1 mile south-west), Udny Station (2 miles south-east), Tarves (3 miles north-west), Cultercullen (3 miles south-east) and Hattoncrook (3 miles south-west). Larger places within reach include Inverurie (8 miles south-west), Westhill (13 miles south), Garioch (8 miles south-west), Kemnay (12 miles south-west), Kintore (10 miles south-west) and Oldmeldrum (5 miles west).
Around Pitmedden
Typical jobs here are in homes near Free Church. Well-known places in the area include Kingseat Hospital (5.3 miles south) and Tolquhon Castle (1.4 miles north-west). Green spaces nearby include Upper Lake.
Repairs by material
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s the part we put right.
FAQs for Pitmedden
Do you do work for letting agents?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses across Aberdeenshire.
Can I get a quote without a visit?
Generally, yes. A close-up and a wider photo are enough to give a fixed quote.
How do I book?
Send photos through the quote form or call 0345 017 0787, and we will do the rest.
What areas do you cover?
We cover the whole UK, including Pitmedden and the rest of Aberdeenshire. Send your postcode with your photos and we will confirm dates.
Can pets and children be at home?
Just keep them out of the work area. We will let you know when it’s safe to use again.
It’s been repaired before. Can you still fix it?
Generally, yes. Let us know what was used before.
What happens once I’ve sent pictures?
We look at the pictures and reply with a fixed price and some dates. If we need another angle, we’ll ask.
Is there a call-out fee?
Travel is included in the price, and we charge the same wherever you are.
The process
From the moment we arrive, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the job takes a full day, depending on what we find, and we finish with a tidy-up and a look at the finished work together.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures.
How to prepare
- Keep a parking space free if you can
- Make sure the area is dry
- Make sure the room can be ventilated
Get a quote
There’s no need for us to visit first. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we will reply with a fixed price.
Related advice
Do you need bath re-enamelling in Pitmedden?
Once enamel loses its gloss, it stains more easily, and scrubbing it wears it down further. That’s the point where re-enamelling makes sense.
If you can see any of these, send us a picture:
- A roll-top that’s seen better days
- Brown or grey marks that don’t clean off
- Lots of chips and rust spots
- Wear marks under the taps
What your quote should include
- Whether they match the colour on site
- If travel is included in the price
- How soon you can use it again
- What protection goes down before work starts
About our accreditations · Every repair comes with a one-year guarantee.
