Staffordshire · England

Bath re-enamelling & resurfacing in The Blythe, Staffordshire

Local bath re-enamelling for The Blythe: photo quotes, tidy work and a year’s guarantee.

  • Resurfacing from £350
  • A bath that stays dull however much you clean it
  • Chips and rust in more than one place
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling for The Blythe homes

About our bath re-enamelling in The Blythe

The bath stays where it is, so your taps, tiles and plumbing are left alone. Most baths are done in one visit, with the bath ready to use the following day. We regularly repair acrylic baths, pressed steel baths and basins & shower trays, and common reasons people contact us are a period or roll-top bath worth keeping and enamel that’s lost its shine and feels rough.

We guarantee the work for a year. If something isn’t right in that time, we come back and put it right.

Location
The Blythe (ST18)
Region
Staffordshire
Guarantee
One year on every repair
Quotes
From £350. Free and fixed, from your pictures
Call
0345 017 0787
Last updated
23 October 2026
Roll-top bath being refinished by a Surface Doctor technician

Do you need bath re-enamelling in The Blythe?

Sometimes it’s an earlier resurfacing that has failed, lifting by the plughole or blistering. Failing coatings are stripped back before we resurface.

Look out for these signs:

  • A peeling or bubbling previous coating
  • Stains that won’t shift
  • Chips and rust in more than one place
  • Wear marks under the taps

Comparing quotes

  • When it can be used again
  • How the room is protected while they work
  • Whether the colour is mixed to match
  • How changes to the job are handled

10 questions to ask before you book

Landlords, agents and businesses in The Blythe

Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so we keep visits short and tidy. We’ll fit around changeovers where we can.

We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We are CHAS, Constructionline and SafeContractor accredited.

Different materials, different repairs

Roll-top and period baths

We can resurface a roll-top inside and out, and the outside can be refinished too.

Pressed steel

Steel baths re-enamel well, as long as any rust is dealt with first. Steel often rusts by the plughole, so we check it carefully.

Should I try a DIY kit first?

It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.

For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.

Keeping it looking good

It’s all simple stuff:

  • Do not leave a chip unrepaired
  • Keep suction mats out of the bath
  • Use washing-up liquid and a soft cloth
  • Wipe the bath dry after use in hard water areas

Stick to mild, non-abrasive cleaners, avoid suction bath mats, and do not leave bottles or razors standing on the surface.

Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further.

When a repair isn’t the answer

We will always be straight with you, so here’s what a repair will not do:

  • Steel that has corroded right through
  • A bath split right through the body
  • Damage hidden under a previous coating, until it’s stripped back

If in doubt, send pictures and we will say what we think.

Materials we repair

  • Basins & shower trays
  • Pressed steel baths
  • Cast iron baths
  • Victorian roll-tops
  • Acrylic baths

About The Blythe

The Blythe is about 4 miles south-west of Uttoxeter, in Staffordshire. Wherever you are in the ST18 postcode area, we carry out the work at your property. The Blythe is one of 512 places in Staffordshire where we work. You can also see our page for Birmingham, about 27 miles away.

We cover every part of the ST18 postcode area and the streets around it. We also travel to Booth (1 mile south-west), Kingstone (1 mile north-east), Leese Hill (1 mile north), Heatley (1 mile south-east) and Loxley Green (2 miles north-east). Within a short drive, we also cover Stafford (9 miles south-west), Burton upon Trent (13 miles east), Cannock (11 miles south), Lichfield (13 miles south), Longton (12 miles north-west) and Rugeley (7 miles south).

Landmarks near The Blythe

Typical jobs here are in homes near The Blythe Inn, Talbot First School and Church of St John. The nearest railway station is Uttoxeter station, about 4.3 miles north-east of the centre. Further afield, we also cover the area around Chartley Castle (2.3 miles west) and Museum of Childhood And Costume (2.9 miles south).

Map of The Blythe © OpenStreetMap contributors

What happens on the day

Nothing needs to be moved out of the room beforehand. We bring everything we need with us, put protection down and start once you are happy with the plan. It usually takes a full day, and you can get on with other things while we’re there.

  1. We check the bath and agree the finish with you.
  2. Everything around the bath is masked and covered.
  3. The bath is degreased, repaired and keyed.
  4. Primer and finish coats are applied.
  5. We remove the masking, tidy up and give you the curing time.

Getting ready for the visit

  • Let the surface dry out before the visit
  • Mention any parking restrictions or tricky access
  • Mention any earlier repairs or resurfacing

Ask for a price

The quickest way to a price is to send a couple of pictures through our quote form or ring us. We will tell you honestly whether it can be repaired.

Get a free quote

Related advice

Your questions about bath re-enamelling in The Blythe

How durable is a resurfaced bath?

That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.

Will there be a smell?

There can be some smell while we work. It fades as everything cures.

What information do you need?

Photos of the damage, a picture of the whole bath and your postcode. After that, we just agree a date.

Can you re-enamel a roll-top bath?

Yes, roll-tops are a big part of our work. The inside is resurfaced, and we can refinish the outside as well.

Someone resurfaced my bath and it’s peeling. Can you help?

Yes. Removing the old finish takes extra time, which we include in the price.

Do you need to take the bath out?

No. We resurface it in place, so the tiles and taps stay put.

Will you leave a mess?

We protect the room with dust sheets and masking first, and tidy up before we leave.

Is it safe with children and pets around?

Keep pets and children away from the work area on the day.

How we price bath re-enamelling

Prices start from £350. A fixed quote means you know the cost before you book. We take into account:

  • The material and finish
  • How hard the colour is to match
  • Whether we combine several jobs
  • Previous DIY repairs that have to come out

A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you will get a fixed figure.

Quotes from your photos

It only takes a minute to photograph the damage. Try to send:

  • Any earlier repairs or coatings
  • Your postcode, so we can check dates
  • Something in shot to show the size
  • Any details about the material

For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.