Wirral · England
Bath re-enamelling & resurfacing in Thingwall, Wirral
We travel to Thingwall for full bath re-enamelling and resurfacing. Everything is done in place, and the work is guaranteed.
- Resurfacing from £350
- Brown or grey marks that don’t clean off
- A peeling or bubbling previous coating

Do you need bath re-enamelling in Thingwall?
Hard water speeds up the wear, and abrasive cleaners do the most damage.
Keep an eye out for these signs:
- A dull, rough surface that will not come clean
- A roll-top that’s seen better days
- An outdated colour you’d like to change
- Brown or grey marks that do not clean off
Before booking anyone
- The length of the guarantee and what it covers
- How the colour is matched
- How to care for the finish
- How changes to the job are handled
Bath re-enamelling in Thingwall, done in place
When a bath is structurally fine but worn out on the surface, resurfacing is normally the best value. There’s no removal, plumbing or tiling involved. If you’re dealing with chips and rust in more than one place and an outdated colour you’d like to change, we can generally put it right, on acrylic baths, pressed steel baths and Victorian roll-tops alike.
We guarantee the work for a year. If there is a problem with the repair within the year, we return and sort it.

- Where
- Thingwall (CH61, CH49)
- Area hub
- Wirral
- Guarantee
- One year on every repair
- Quotes
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
More services for Thingwall
Where we work around Thingwall
Thingwall is about 1 mile north of Heswall, in Wirral. Wherever you are in the CH61 postcode area, we carry out the work at your property. Thingwall is one of 44 places in Wirral where we work. Our nearest city page is Liverpool, about 8 miles away.
All of CH61 and CH49 is covered. Local streets include Mill Road, Whaley Lane and Oaklea Road, and we cover them all. We also travel to Barnston (1 mile south-east), Pensby (1 mile south), Heswall (1 mile south), Woodchurch (2 miles north) and Storeton (2 miles east). Within a short drive, we also cover Birkenhead (3 miles north-east), Wallasey (5 miles north), Bebington (4 miles east), Moreton (3 miles north), West Kirby (4 miles west) and Bromborough (5 miles east).
Local landmarks in Thingwall
In Thingwall, that means homes near Thingwall Primary School, St. Michael & All Angels and The Basset Hound pub, among other places. Also close by are Arrowe Country Park (1.1 miles north) and Pensby High School (1.1 miles south-west). Thingwall’s nearest station is Heswall station, roughly 1.8 miles south-east. Other landmarks nearby include Heswall cum Oldfield (1.8 miles south-west) and Leasowe Castle (4.6 miles north). The countryside around Thingwall includes West Kirby Marine Lake and Bidston Hill.
What affects the price in Thingwall
Resurfacing from £350. Every quote is fixed and free. What we take into account:
- What the surface is made of
- How many areas need work
- Whether old repairs or coatings need taking off
- The type of damage
Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
Quotes from your pictures
Most quotes are done from pictures alone. To help us price it:
- Your postcode, so we can check dates
- Daylight if possible, and no flash reflection
- A coin or ruler next to the damage for scale
- A clear, close picture of the problem area
There’s no need for us to visit first. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
What we cannot put right
A repair is not always the answer, and we’ll tell you before we start. Repairs will not solve:
- A bath that’s rusted through
- Plumbing leaks, which need a plumber
- A poorly supported acrylic bath, until it’s firmed up
Not sure? Send photos and we will give you a straight answer before you book.
Materials we repair
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
What we do, step by step
We work cleanly and quietly. We protect the area first, then the work takes most of the day. Before we leave, we explain how soon it can be used and how to care for it.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Move bottles, mats and clutter away from the area
- Have somewhere for us to park nearby if possible
- Tell us about any previous repairs or coatings
Ask for a price
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them over. What comes back is a fixed price, not a guess.
Related advice
Repairing versus replacing in Thingwall
Replacement only makes sense in a few cases: if the bath is cracked through, if you want a different size or shape, or if you are refitting the entire room anyway. In most other cases, resurfacing is the better choice. Our bath re-enamelling starts from £350. The price depends on the type and amount of damage, what it’s made of and how many items we do on one visit. You get a fixed price from your pictures, so there are no surprises on the day.
What you get with us
- One-year guarantee on every repair
- Straight answers about what a repair can do
- A fixed quote before you book
- Repair technicians who travel to you, UK-wide
Read our full price list or guide to resurfacing and replacement costs.
Your questions about bath re-enamelling in Thingwall
Will there be a smell?
Some materials have a smell while they’re applied, which is why we ventilate. It fades as everything cures.
Will you leave a mess?
We protect the room with dust sheets and masking first, and we clean up when we have finished.
What if the damage is worse than the photos show?
If we find something the photos didn’t show, we explain it first. The price only changes if you agree.
How long does re-enamelling last?
That depends on preparation and how the bath is treated. With good preparation and gentle cleaning it lasts a long time, and it’s guaranteed for a year.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as householders.
How much does bath re-enamelling cost in Thingwall?
Resurfacing from £350. We give a fixed price from your photos. Send a close-up and a picture of the entire item with your CH61 postcode.
Can you change the colour of my bath?
Yes, white is the usual choice. Mention the colour you want when you send pictures.
Is it worth repairing rather than replacing?
Normally, when the rest is in good condition. A repair avoids removal and making good. We’ll tell you honestly if replacement makes more sense.
Aftercare tips
It’s all simple stuff, just a few sensible habits:
- Rinse off hair dye, oils and bath bombs immediately
- Stick to gentle, non-abrasive cleaners
- Don’t leave bottles, razors or sponges standing on the surface
- Dry the bath after use to stop limescale
Wait for the curing time we give you before the first bath. After that, a soft cloth and washing-up liquid is all it needs.
Do not try to scrub a worn bath back to shine. It removes more of the surface.
Repairs by material
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
Landlords, agents and businesses in Thingwall
For anyone letting property in or around Thingwall, we will quote for several properties at once. Just send photos for each address and we will price them together.
We regularly work with letting and managing agents. Just send photos, the address and how to get access and we’ll arrange it.
About our accreditations · Every repair comes with a one-year guarantee.

