Wirral · England
Bath Re-enamelling in West Kirby
Full bath re-enamelling and resurfacing in West Kirby, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- Worn patches where water runs and sits
- A coating lifting around the plughole
How we handle bath re-enamelling in West Kirby
After re-enamelling, the bath has a smooth, glossy, new-looking surface, but without the cost and upheaval of a refit. It suits anyone happy with the bathroom apart from the bath. Whether it’s chips and rust in more than one place and an old resurfacing that’s failing, we can typically put it right, on basins & shower trays, cast iron baths and acrylic baths alike.
You are covered for a year from the day of the repair. Just call us if there is a problem and we’ll sort it.
- Location
- West Kirby (CH48)
- County
- Wirral
- Cover
- A year, on every repair
- Price
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Signs you need bath re-enamelling in West Kirby
The gloss on enamel is thin, and every scrub with an abrasive cleaner takes a little away. Eventually the surface turns porous and stains.
Send us a picture if you notice any of these:
- An old resurfacing that is failing
- Staining under the taps and around the waste
- A bath that stays dull however much you clean it
- A roll-top that’s seen better days
Before you book anyone
- Whether cleaning and preparation are in the price
- Whether the colour is mixed to match
- How soon you can use it again
- Whether the price covers travel
West Kirby and nearby
West Kirby is about 4 miles north-west of Heswall, in Wirral. We agree a date that works for you, and you’ll know when to expect us, so you are not left waiting in all day. We work in all 44 towns and villages in Wirral. We work right across the region, from West Kirby to Liverpool (about 10 miles away).
Every address in CH48 is covered, from the main roads to the quietest streets. Jobs here include addresses on Church Road, Monk's Way and Priory Road and the roads around them. West Kirby sits on or near the A540 and B5139, so getting to you is simple. If you’re just outside West Kirby, we cover Newton (1 mile east), Larton (1 mile east), Caldy (1 mile south), Hoylake (1 mile north) and Frankby (2 miles east). Larger places within reach include Birkenhead (5 miles east), Wallasey (6 miles north-east), Bebington (8 miles east), Heswall (4 miles south-east), Moreton (3 miles north-east) and Bromborough (8 miles east). West Kirby is one of the larger places we cover in Wirral.
Local landmarks in West Kirby
We visit homes around West Kirby St Bridget's CofE Primary School, Ashton Park and St Bridget's Church. You will also find Calday Grange Grammar School (0.5 miles south-east) and Ring O'Bells pub (within half a mile south). West Kirby’s nearest station is West Kirby station, about 0.5 miles west of the centre. Nearby you’ll also find West Kirby Museum (less than half a mile south-west) and Arrowe Park Hospital (3.2 miles east). For a walk, there’s Bidston Hill and West Kirby Marine Lake.
Prices and what affects them
Prices start from £350. We give every job a fixed quote from pictures. This is what makes a difference:
- The size and number of damaged areas
- Whether old repairs or coatings need taking off
- The material and finish
- Doing more than one item at once
Set against the cost of replacement, repairing typically costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.
Send pictures for a quote
When you take your photos, a few simple things make all the difference:
- One sharp close-up of the damage
- A wider photo showing the whole bath
- Any earlier repairs or coatings
- A coin beside the damage so we can judge size
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them over. What comes back is a fixed quote, not a guess.
Landlord and trade work in West Kirby
We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which matters when someone is living in the home.
We regularly work with letting and managing agents. Send the address, pictures and access details and we’ll handle the rest.
Can I fix it myself?
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
What a repair can’t fix
To be straight with you, some problems need a different fix:
- Holes rusted through the metal
- Damage hidden under a previous coating, until it’s stripped back
- Leaking taps or wastes (a plumber’s job)
Not sure? Send photos and we’ll give you a straight answer before booking.
What we work on
- Basins & shower trays
- Cast iron baths
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
Other services in West Kirby
What we do, step by step
Arrival times are agreed in advance, so you are not left guessing. On site, it takes the best part of a day. We leave the room clean and ready to use once it has cured.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure.
Preparing for the visit
- Open a window if you can
- Clear toiletries, mats and anything else from around the area
- Let us know if it has been repaired before
Getting a price
Send us a picture of the damage and a wider shot of the whole item, and tell us you’re in West Kirby, and we will come back with a fixed quote.
Related advice
Materials and what they mean for the repair
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. The bath needs to be firm and well supported.
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Steel frequently rusts by the plughole, so we pay close attention there.
FAQs for West Kirby
Can you price it without visiting?
In nearly every case. If pictures do not show enough, we’ll ask for another angle.
Can landlords book you?
We do, regularly. We can quote for several properties together and work between tenancies.
Do I have to be there?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
How long does re-enamelling last?
It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.
Can you repair several things at once?
Of course, and it typically saves money. Send pictures of everything together and you will get one combined price.
Does re-enamelling smell?
Some odour is normal while we spray, which is why we ventilate the bathroom. It fades as the coating cures.
Can you repair something that is been repaired before?
Normally, yes. We remove the old repair before doing a new one, so let us know about it.
What do you need from me?
A close-up, a wider photo and your postcode. After that, we just agree a date.
How to look after the repair
Much of the damage we repair could have been avoided. These habits help:
- Stick to gentle, non-abrasive cleaners
- Do not leave a chip unrepaired
- Repair dripping taps early
- Don’t let dyes or oils sit on the finish
The first few days matter most: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
Worn enamel only gets rougher with time, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
About our accreditations · Every repair comes with a one-year guarantee.
