Wirral · England

Bath Re-enamelling for Bromborough homes

Our technicians come to Bromborough for full bath re-enamelling and resurfacing. Nothing is taken out, with a one-year guarantee.

  • Resurfacing from £350
  • Several chips and rust patches
  • A bath in a colour that no longer suits
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling near Bromborough

Bath re-enamelling in Bromborough without replacing anything

After re-enamelling, the bath has a smooth, glossy, new-looking surface, without any of the disruption of replacing it. It suits anyone happy with the bathroom apart from the bath. Typical jobs include an old resurfacing that’s failing and a dull, rough surface that won’t come clean, across Victorian roll-tops, cast iron baths and pressed steel baths.

We guarantee the work for a year. If there is a problem with the repair within the year, we return and sort it.

Surface Doctor technician refinishing the outside of a roll-top bath
Location
Bromborough (CH62, CH63)
County
Wirral
Warranty
One year on every repair
Quotes
From £350. Free, fixed price from pictures
Telephone
0345 017 0787
Page updated
23 October 2026

About Bromborough

Bromborough is about 1 mile south-east of Bebington, in Wirral. Book a date that suits you, and we will give you an arrival time in advance, so there’s no waiting around. We cover 44 places across Wirral.

We cover every part of CH62 and CH63. Streets in the area include Acre Lane, Mill Road and The Avenue, and we cover them all. Being close to the A41, Bromborough is simple for us to get to. We also cover the places around Bromborough: Bebington (1 mile north-west), Eastham Ferry (1 mile south-east), Bromborough Pool (1 mile north), Raby Mere (1 mile south-west) and Port Sunlight (1 mile north-west). Within a short drive, we also cover Birkenhead (4 miles north-west), Wallasey (6 miles north-west), Heswall (5 miles west), Moreton (7 miles north-west), West Kirby (8 miles west) and Greasby (7 miles north-west). Bromborough is one of the larger places we cover in Wirral.

Near you in Bromborough

Around Bromborough, we work in homes near St Barnabas' Church, Marfords Park and Wirral Grammar School for Boys, among other places. Also close by are Co-op Academy Woodslee (under half a mile west) and The Bromborough pub (within half a mile south). For rail, the closest station is Bromborough Rake station, about 0.6 miles south-west. Other landmarks nearby include Liverpool Castle (4.8 miles north) and Municipal Borough of Bebington (1.4 miles north-west). Green spaces nearby include Princes Park lake and New Ferry Butterfly Park.

Map of Bromborough © OpenStreetMap contributors

Should I try a DIY kit first?

We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.

DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.

Repair or replace in Bromborough?

Replacing a bath typically involves a plumber, a fitter and a tiler. Re-enamelling takes one technician and generally one day, with the bath ready the day after. Our bath re-enamelling starts from £350. Compared with replacing, repairing typically costs far less, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.

Why Bromborough clients choose us

  • One visit for most repairs
  • Dust sheets down, tidy finish
  • A year’s guarantee on all work
  • Colours mixed by hand to suit your surface

Read our pricing and resurfacing vs replacement cost guide.

What affects the price in Bromborough

Resurfacing from £350. We do not charge extra for travel to Bromborough. The price comes down to:

  • Previous DIY repairs that have to come out
  • How many areas need work
  • Whether it’s a chip, crack, burn or wear
  • Doing more than one item at once

A repair is priced on what needs doing, not your postcode. You will see the full price before you book.

Send pictures for a quote

Two or three clear photos are typically enough. It helps if you send:

  • Any details about the material
  • A coin or ruler next to the damage for scale
  • Whether it’s been repaired or coated before
  • One picture of the entire bath

Getting a price is easy: snap the damage close up and then the entire item, send them over with your postcode, and we’ll reply with a fixed price. There’s no charge for the quote and no obligation.

Signs you need bath re-enamelling in Bromborough

Enamel’s shine is only skin deep, and every scrub with an abrasive cleaner takes a little away. Eventually the surface turns porous and stains.

The most common problems we are called about are:

  • An old resurfacing that’s failing
  • Wear marks under the taps
  • An original cast iron bath that needs restoring
  • Stains that won’t shift

What to look for in a quote

  • Whether the colour is mixed to match
  • Who will actually do the work
  • What the guarantee covers, and for how long
  • When it can be used again

Our hiring checklist

Repairs by material

Roll-top and period baths

Freestanding roll-tops can be done inside and out, and the outside can be refinished too.

Cast iron

Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s the part we put right.

Questions from Bromborough

How much does bath re-enamelling cost in Bromborough?

Prices start from £350. The exact price depends on the damage, so we quote from pictures. You know the full cost before anything is booked.

Is it safe with children and pets around?

We ask you to keep children and pets out of the room while we work. Everywhere else in the home is fine.

Do you do work for letting agents?

Yes. We work for landlords, agents, builders and businesses as well as householders.

Do you charge for travel?

No. Our quotes include travel, with the same prices everywhere we work.

Is it worth repairing rather than replacing?

Generally, yes. A repair skips the removal, fitting and redecorating. We’ll be honest if it’s not worth it.

Which areas do you work in?

All of Wirral, and the rest of the UK. There’s no extra charge for travel.

Can you repair several things at once?

Of course, and it usually saves money. Just add the extra items to your pictures and we’ll quote them together.

Is my repair covered?

Every repair comes with our one-year guarantee. We will explain what it covers when we quote.

How the visit works

Here’s how a visit generally runs: we arrive at the agreed slot, protect everything around the work area, carry out the work and tidy away. Allow the best part of a day from start to finish. Before we go, we’ll explain when it can be used and how to look after it.

  1. We check the bath and agree the finish with you.
  2. Everything around the bath is masked and covered.
  3. The bath is degreased, repaired and keyed.
  4. We apply the primer and then the finish coats.
  5. We remove the masking, tidy up and give you the curing time.

Before we arrive

  • Mention if the room is upstairs or in a flat
  • Mention any earlier repairs or resurfacing
  • Avoid using the area for a few hours before we arrive

Get a quote

A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them to us. You will get a fixed quote, not an estimate.

Send pictures for a quote

Read more

For landlords and businesses

For anyone letting property in or around Bromborough, we can repair and quote for several addresses together. Send pictures for each one and we will price them together.

Landlords, letting agents and housing providers in Bromborough use us as well as homeowners. Repairing between tenancies keeps void periods short, and it generally costs far less than a refit.

Aftercare tips

How the surface is treated afterwards matters. Here’s what we suggest:

  • Leave the bath for the full curing time before using it
  • Keep suction mats out of the bath
  • Use washing-up liquid and a soft cloth
  • Have chips seen to early

Rinse the bath and wipe it over after use, particularly where water is hard, so limescale can’t build up.

The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Resurfacing sooner means less repair work first.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.