Central Bedfordshire · England
Bath Re-enamelling for Thorn homes
Full bath re-enamelling and resurfacing at your home in Thorn, with a one-year guarantee on every repair.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- Wear marks under the taps
About our bath re-enamelling in Thorn
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. The finish is sprayed on in several coats over a bonding primer, after the bath has been cleaned, repaired and keyed. Common call-outs are for an old resurfacing that’s failing and stains that won’t shift, in cast iron baths, Victorian roll-tops and pressed steel baths.
A one-year guarantee comes as standard, so you are not left on your own once we’ve gone.
- Area
- Thorn (LU5)
- County
- Central Bedfordshire
- Guarantee
- 12 months on all our work
- Quotes
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Should I try a DIY kit first?
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is typically cheaper.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
Signs you need bath re-enamelling in Thorn
Previous coatings can fail too, peeling around the waste or bubbling. Failing coatings are stripped back before we resurface.
These are the problems we are asked about most:
- An outdated colour you’d like to change
- A coating lifting around the plughole
- A roll-top that is seen better days
- A bath that stays dull however much you clean it
Questions to ask before you book
- What aftercare is recommended
- The length of the guarantee and what it covers
- A fixed price, and whether VAT is included
- How the colour is matched
What happens on the day
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take a full day. We clean up when we are done and tell you when it’s ready to use.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Preparing for the visit
- Keep pets and children out of the room while we work
- Point us to the nearest place to park
- Mention any parking restrictions or tricky access
How to get a price
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we’ll come back with a fixed figure.
Related advice
Nearby places to Thorn
What else we do in Thorn
When we would advise against a repair
Before booking, it’s worth knowing the limits too:
- A poorly supported acrylic bath, until it’s firmed up
- A bath that is rusted through
- Leaks from fittings rather than the bath
If in doubt, send photos and we will say what we think before booking.
Surfaces we repair
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
- Cast iron baths
Repairs by material
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. It must be solid and not flex underfoot for the finish to last.
Keeping it looking good
How the surface is treated afterwards matters:
- Stick to gentle, non-abrasive cleaners
- Leave the bath for the full curing time before using it
- Store bottles off the bath
- Avoid suction-cup mats
Use mild, non-abrasive cleaners, avoid suction bath mats, and do not leave bottles or razors standing on the surface.
Rust spots on a worn bath get worse with time, and each one adds to the preparation. Resurfacing before they spread keeps it simpler.
Thorn: your questions answered
How long is the bath unusable?
Most baths are done in a day, ready the next day. We give you timings with the quote.
Can you make a coloured bath white?
Yes, white is the usual choice. Mention the colour you want when you send pictures.
Can you redo someone else’s repair?
Generally, yes. Tell us what was done before and we will plan for it.
Do you come to Thorn?
Yes. We work across the UK and travel to Thorn. Send pictures and we’ll quote, or call 0345 017 0787.
Are you a vetted contractor?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Can you re-enamel a roll-top bath?
Yes. We can do the inside and outside if you’d like.
Can tenants book a repair?
We’re happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.
Is there a guarantee?
All our work carries a one-year guarantee. Ask us what it covers when you get your quote.
Landlord and trade work in Thorn
We carry out planned and one-off repairs for housing associations and facilities teams in Central Bedfordshire and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
Where we work around Thorn
Thorn is about 1 mile west of Houghton Regis, in Central Bedfordshire. Wherever you are in the LU5 postcode area, a technician comes to you. We cover 121 places in Central Bedfordshire, from the larger towns to small villages. You can also see our page for London, about 34 miles away.
Every address in LU5 is within our area, from the main roads to the quietest streets. Whether you live on Thorn Road, Collie Place and Alban Corner or a nearby road, a technician can come to you. Nearby, we also work in Bidwell (1 mile east), Chalk Hill (1 mile south), Wingfield (1 mile north), Houghton Regis (1 mile east) and Tebworth (2 miles north-west). We also work in nearby towns such as Leighton Buzzard (5 miles west), Flitwick (7 miles north), Linslade (6 miles west), Shefford (12 miles north-east), Ampthill (8 miles north) and Lower Stondon (12 miles north-east).
What’s near Thorn
Around Thorn, we work in homes near Houghton Regis Primary School, All Saints Academy Dunstable and The Red Lion Public House and the streets around them. For rail, the closest station is Leagrave station, about 3.6 miles east of the centre. Further afield, we also cover the area around Chalgrave Castle (1.7 miles north) and South Bedfordshire (0.5 miles north-west). Green spaces nearby include Smithcombe Hill and Sewell Cutting.
Repair or replace in Thorn?
Getting a cast iron bath out is hard work: they’re heavy, frequently need breaking up, and a new one isn’t cheap. Re-enamelling avoids all of it. Prices start from £350. We charge the same wherever you are, so there’s no premium for Thorn. The job itself decides the price: the material, the amount of damage and how many items.
Why us?
- Everything repaired in place
- One-year guarantee on every repair
- Rooms protected and left tidy
- CHAS, Constructionline and SafeContractor accredited
See our pricing and guide to resurfacing and replacement costs.
About our accreditations · Every repair comes with a one-year guarantee.
