Central Bedfordshire · England
Bath Re-enamelling in Tilsworth
Bath re-enamelling in and around Tilsworth: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- A dull, rough surface that will not come clean
- A bath in a colour that no longer suits
Bath re-enamelling in Tilsworth without replacing anything
Re-enamelling is a one-day job for most baths, with the bath ready to use the following day. Nothing is disconnected or removed. We work on acrylic baths, cast iron baths and basins & shower trays, and the jobs we see most are a bath in a colour that no longer suits and a roll-top that’s seen better days.
All our work is covered by our one-year guarantee.
- Area
- Tilsworth (LU7)
- Area hub
- Central Bedfordshire
- Warranty
- One year on every repair
- Quotes
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Your questions about bath re-enamelling in Tilsworth
Is a repair better than a new one?
Typically, when the rest is in good condition. A repair avoids removal and making good. If replacing would be better, we will say so.
Is there a smell?
Yes, while we are applying the finish. We set up ventilation and the smell fades as it cures.
How much does bath re-enamelling cost in Tilsworth?
Resurfacing from £350. We give a fixed price based on photos of the damage. Send a close-up and a picture of the entire item and your postcode.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Do you cover Tilsworth?
Yes. We cover the whole UK and come to Tilsworth and the rest of Central Bedfordshire. Send photos and we will quote, or call 0345 017 0787.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.
How soon can you come?
Your quote comes with available dates. If it’s urgent, say so and we will do what we can.
Is my repair covered?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
DIY kit or professional repair?
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is usually cheaper.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
Should you replace it?
When the bathroom is fine apart from the bath’s finish, re-enamelling is the least disruptive fix. Nothing else is disturbed. Prices start from £350. What it costs depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. You get a fixed quote from your pictures, so there are no surprises on the day.
Why choose Surface Doctor in Tilsworth
- Colour mixed on the day to match
- One visit for most repairs
- Work done at your home or business
- Dust sheets down, tidy finish
Take a look at our prices page and resurfacing vs replacement cost guide.
When a repair is not the answer
Some jobs aren’t right for a repair, including:
- Acrylic that moves when you stand in it
- A bath that is rusted through
- A metal bath with a through crack
Send us pictures and we’ll tell you honestly.
Surfaces we repair
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
Aftercare tips
So the finish stays in good condition:
- A quick wipe after use keeps limescale away
- Don’t let dyes or oils sit on the finish
- Respect the curing time we give you
- A dripping tap should be fixed promptly
Use mild, non-abrasive cleaners, do not use suction bath mats, and keep bottles and razors off the surface.
Do not try to scrub a worn bath back to shine. It just wears the enamel further and makes resurfacing more work.
Also near Tilsworth
More services for Tilsworth
What affects the price in Tilsworth
Resurfacing from £350. There are no hourly rates or hidden extras. The price depends on:
- The material
- How many items we do on one visit
- Where the damage is and how we get to it
- Whether it’s a chip, crack, burn or wear
Rather than charging by the hour, we price the whole job up front. It depends on the damage, the material and access.
Send pictures for a quote
Before you send photos, a few simple things make all the difference:
- Your postcode, so we can check dates
- A clear, close picture of the problem area
- Whether it’s been repaired or coated before
- A wider photo showing the whole bath
The quickest way to a price is to send two or three photos through our quote form or ring us. We will tell you honestly whether it can be repaired.
When to call us in Tilsworth
Often the bath has just had decades of use, and only the surface is worn. The body of the bath is normally perfectly sound.
These are the problems we are asked about most:
- Chips and rust in more than one place
- A bath in a colour that no longer suits
- Brown or grey marks that do not clean off
- A period or roll-top bath worth keeping
What to look for in a quote
- How the colour is matched
- What preparation is included
- How long the guarantee is and what it covers
- Is the price fixed, and does it include VAT?
What happens on the day
It’s a tidy, low-fuss visit. We agree the arrival time in advance, protect the area, and get on with the job, which normally takes a full day. If we find something your pictures didn’t show, we’ll explain it before carrying on.
- First we protect the bathroom and set up ventilation.
- The bath is cleaned, degreased and any chips or rust repaired.
- We prepare the surface and apply a bonding primer.
- We spray on the new enamel finish in several coats.
- The bath is left to cure and can normally be used the next day.
How to prepare
- Keep pets and children out of the room while we work
- Ensure the room can be ventilated
- Avoid using the area for a few hours before we arrive
Ask for a price
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can price the job the same day in most cases.
Read more
About Tilsworth
Tilsworth is about 3 miles west of Houghton Regis, in Central Bedfordshire. Wherever you are in the LU7 postcode area, we carry out the work at your property. Tilsworth is one of 121 towns and villages in Central Bedfordshire we cover. You can also see our page for London, about 35 miles away.
All of LU7 is covered, from the main roads to the quietest streets. Local streets include Stanbridge Road, Bury Rise and Dunstable Road, all of which we cover. If you’re just outside Tilsworth, we cover Stanbridge (1 mile west), Chalk Hill (2 miles east), Hockliffe (2 miles north), Thorn (2 miles east) and Tebworth (2 miles north-east). Larger places within reach include Leighton Buzzard (3 miles west), Dunstable (3 miles south-east), Houghton Regis (3 miles east), Flitwick (7 miles north-east), Linslade (4 miles west) and Shefford (14 miles north-east).
Local landmarks in Tilsworth
Our customers here include homes close to All Saints Academy Dunstable, The Anchor pub and Church of All Saints and the streets around them. The closest station to Tilsworth is Leighton Buzzard station, roughly 4.2 miles west of the centre. Well-known places in the area include Chalgrave Castle (2.7 miles north-east) and Luton and Dunstable Hospital (4.6 miles east). Green spaces nearby include Ivinghoe Beacon and Totternhoe nature reserve.
- Local facilities include South Bedfordshire (1.4 miles north-east)
Materials and what they mean for the repair
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
About our accreditations · Every repair comes with a one-year guarantee.
