Shropshire · England
Bath Re-enamelling in Tilstock
Fixed-price bath re-enamelling in Tilstock and the surrounding area, done in a single visit in most cases and guaranteed for a year.
- Resurfacing from £350
- A coating lifting around the plughole
- A period or roll-top bath worth keeping
What bath re-enamelling costs
Prices start from £350. Each job gets its own fixed quote. These are the things that affect it:
- What the surface is made of
- Whether it’s a chip, crack, burn or wear
- Any earlier repairs that need removing first
- Access to the area
The price reflects the work involved, not your postcode. You will see the full price before booking, with no extras added later.
How to get a fixed quote
We price nearly every job from photos. This is what we need:
- One picture of the whole bath
- A coin beside the damage so we can judge size
- Any earlier repairs or coatings
- A clear, close picture of the problem area
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them to us. You’ll get a fixed quote, not an estimate.
Bath re-enamelling in Tilstock, done in place
Most baths are re-enamelled in a day, with the bath ready to use the following day. Nothing is disconnected or removed. If you’re dealing with wear marks under the taps and a dull, rough surface that won’t come clean, we can help.
We stand behind the work with a one-year guarantee.
- Where
- Tilstock (SY13)
- Region
- Shropshire
- Guarantee
- A year, on every repair
- Price
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
When to call us in Tilstock
Once enamel loses its gloss, it stains more easily, and cleaning harder only makes it worse. At that stage, resurfacing is the fix.
These are the problems we are asked about most:
- An original cast iron bath that needs restoring
- An old resurfacing that’s failing
- An outdated colour you’d like to change
- Staining under the taps and around the waste
Before booking anyone
- What the guarantee covers, and for how long
- Aftercare advice
- Who will actually do the work
- What preparation is included
Our work in Tilstock
Tilstock is about 8 miles west of Market Drayton, in Shropshire. Customers in Tilstock get the same service as everywhere else we cover: a fixed price from your pictures, then a visit to do the work. We work in 433 places across Shropshire. We work right across the region, from Tilstock to Liverpool (about 34 miles away).
Postcode districts we cover here: SY13. From Crabmill Meadow, Tilstock Close and Church Close or a nearby road, we can come to you. Close by, we cover Steel Heath (1 mile south), Prees Heath (1 mile east), Heathlane (1 mile north-east), Cotonwood (1 mile south-west) and Ash (2 miles north-east). Further out, we also cover Market Drayton (8 miles east), Monkmoor (15 miles south), Bagley (15 miles south), Underdale (15 miles south), Wem (6 miles south) and Ditherington (15 miles south).
Local landmarks in Tilstock
Typical jobs here are in homes near Tilstock Christ Church, Sir John Talbot's School and Tilstock CofE Primary and Nursery, among other places. The closest station to Tilstock is Whitchurch (Shropshire) station, roughly 2.2 miles north of the centre. Nearby you’ll also find Whitchurch Community Hospital (2.5 miles north) and Soulton Hall Moat (4.7 miles south). The countryside around Tilstock includes Prees Heath Common and Fenns Bank Works Pool 2.
What else we do in Tilstock
Repair or replace: which is better?
For a sound bath, resurfacing costs far less than replacement, when you count removal, plumbing, tiling and decorating. It’s also far quicker. Resurfacing from £350, with every job priced individually. Set against the cost of replacement, repairing generally costs far less, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Why book with us
- No extra charge for your area
- Free fixed quotes from pictures
- Honest advice, even when it means no job
- Repair technicians who travel to you, UK-wide
Read our full price list and guide to resurfacing and replacement costs.
What we cannot put right
We’d rather lose a job than do one that will not last, so here’s what a repair cannot put right:
- A cast iron or steel bath that is cracked right through
- Leaking taps or wastes (a plumber’s job)
- Acrylic that moves when you stand in it
Send us pictures and we will tell you honestly before booking.
Materials we repair
- Pressed steel baths
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
Tilstock questions
Do you work in Tilstock?
We do. Technicians travel to Tilstock from across the region, with no extra charge for travel.
Do the materials smell?
Some materials have a smell while they’re applied, which is why we ventilate. It fades as everything cures.
What happens if you find more damage?
Your quote covers the damage in the photos. Anything extra is discussed before we begin.
What does bath re-enamelling cost?
Prices start from £350. Every job gets a fixed quote based on photos of the damage. Send a close-up of the damage and a wider photo and your postcode.
Is there a smell?
Some odour is normal while we spray, which is why we ventilate the bathroom. It fades as the coating cures.
Can you resurface a pink bath in white?
Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.
How soon can you come?
We’ll give you dates with your quote. If it’s urgent, say so and we’ll do what we can.
Can pets and children be at home?
Yes, as long as they stay out of the room we’re working in. We will let you know when it’s safe to use again.
How it works
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job typically takes the best part of a day. We clean up when we’re done and tell you when it’s ready to use.
- We mask and protect the room and ventilate it.
- We clean and degrease the bath and repair any chips or rust.
- The surface is prepared and a bonding primer applied.
- Several coats of new finish are sprayed on.
- Once cured, normally by the day after, the bath is ready.
How to prepare
- Point us to the nearest place to park
- Clear toiletries, mats and anything else from around the area
- Keep children and pets away from the room on the day
How to get a price
There’s no need for us to visit first. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
Advice
DIY kit or professional repair?
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it won’t stop us repairing it. Just mention it when you send photos, as it can add time.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
Looking after it afterwards
Nothing complicated is needed, just a few sensible habits:
- Dry the bath after use to stop limescale
- Avoid suction-cup mats
- Fix dripping taps quickly
- Store bottles off the bath
Use mild, non-abrasive cleaners, don’t use suction bath mats, and do not leave bottles or razors standing on the surface.
Do not try to scrub a worn bath back to shine. It just wears the enamel further and makes resurfacing more work.
Work for landlords and builders
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
About our accreditations · Every repair comes with a one-year guarantee.
