Shropshire · England
Bath re-enamelling & resurfacing in Monkmoor, Shropshire
Bath re-enamelling in and around Monkmoor: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- Several chips and rust patches
- A coloured bath you want in white
Bath re-enamelling in Monkmoor without replacing anything
Re-enamelling gives a worn bath a new glossy surface without taking anything out. It suits baths that are dull, stained, rough or chipped all over. Whether it’s a coloured bath you want in white and a roll-top that’s seen better days, we can normally put it right, on basins & shower trays, cast iron baths and pressed steel baths alike.
Your repair is guaranteed for a year, as with every job we do.
- Where
- Monkmoor (SY2, SY1)
- Region
- Shropshire
- Guarantee
- A year, on every repair
- Quotes
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
What we’re called out for in Monkmoor
Enamel does not fail overnight. Abrasive cleaners, limescale and years of use wear the gloss away, starting where water runs and sits.
Customers typically contact us about:
- A bath that stays dull however much you clean it
- Staining under the taps and around the waste
- Worn patches where water runs and sits
- An original cast iron bath that needs restoring
Before booking anyone
- Whether there are any call-out or travel charges
- How long the guarantee is and what it covers
- What happens if they find more damage
- How to care for the finish
Where we work around Monkmoor
Monkmoor is about 1 mile north-east of Shrewsbury, in Shropshire. Customers in Monkmoor get the same service as everywhere else we cover: a fixed quote from your photos, and a technician at your door on the day. We work in all 433 towns and villages in Shropshire, from the larger towns to small villages. We work right across the region, from Monkmoor to Birmingham (about 39 miles away).
Jobs in SY2 and SY1 work the same way as everywhere else we cover. We regularly work on streets such as Shaw Road, Dale Road and Clive Road and the roads around them. Being close to the A5112, Monkmoor is easy for our technicians to reach. Nearby, we also work in Underdale (1 mile west), Ditherington (1 mile north-west), Heathgates (1 mile north), Shrewsbury (1 mile south-west) and Bagley (1 mile west). Further out, we also cover Madeley (13 miles south-east), Shifnal (15 miles east), Wem (10 miles north), Broseley (13 miles south-east), Oxon (3 miles west) and Ellesmere (15 miles north-west).
Around Monkmoor
Around Monkmoor, we work in homes near The Telegraph pub, The Wilfred Owen School and Belvidere School, among other places. Also close by are St Peter's church (less than half a mile south-west) and Wakeman School (0.9 miles south-west). The closest station to Monkmoor is Shrewsbury station, about 0.9 miles west. Well-known places in the area include Darwin Shopping Centre (1 mile west) and Clive House Museum (1.2 miles south-west). Not far away are Bomere Pool and Haughmond Hill.
Looking after it afterwards
Once the work has cured, treat it gently:
- Fix dripping taps quickly
- Get any chip repaired quickly
- Do not let dyes or oils sit on the finish
- Stick to gentle, non-abrasive cleaners
The first few days matter most: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
Towns and villages near Monkmoor
Other services in Monkmoor
The process
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take the best part of a day. We clean up when we’re done and let you know when you can use it again.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures.
Before we arrive
- Tell us about parking, stairs or access
- Point us to the nearest place to park
- Have a window or extractor fan available
Getting a price
To get a price, send two or three photos through our quote form or ring us. We will tell you honestly if a repair is the right fix.
Read more
Should I try a DIY kit first?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is typically the cheaper route.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
How we price bath re-enamelling
Prices start from £350. A fixed quote means you know the cost before you book. We look at:
- How hard the colour is to match
- How easy the damage is to reach
- Previous DIY repairs that have to come out
- How many items we do on one visit
No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.
Getting a price from pictures
You can usually get a fixed quote without us visiting. To help us price it:
- The postcode, so we can plan the visit
- A photo taken from further back
- Natural light rather than flash
- A close-up of the damage, in focus
We price from pictures so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.
Repairs by material
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
When a repair is not the answer
We will not take on work that won’t last, so here’s what a repair can’t put right:
- A poorly supported acrylic bath, until it’s firmed up
- A cast iron or steel bath that is cracked right through
- Plumbing leaks, which need a plumber
Not sure? Send pictures and we will give you a straight answer before you book.
Surfaces we repair
- Cast iron baths
- Basins & shower trays
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
Landlords, agents and businesses in Monkmoor
We regularly work with letting and managing agents. Just send pictures, the address and how to get access.
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Questions from Monkmoor
How long does re-enamelling take?
Generally one day, with the bath ready the following day. Deeply pitted baths may need a second day.
Do you need to take the bath out?
No. We resurface it in place, so nothing else is disturbed.
Are you a vetted contractor?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Are there extra charges for Monkmoor?
No. Our quotes include travel, with the same prices everywhere we work.
Can you fix a peeling bath coating?
Usually, yes. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.
Is it worth repairing rather than replacing?
Typically, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. If replacing would be better, we’ll say so.
Can you repair something that’s been repaired before?
Yes, regularly. It can add a little time, which we include in the quote.
Can you do the outside of a roll-top?
Yes. We can do the inside and outside if you’d like.
About our accreditations · Every repair comes with a one-year guarantee.
