Calderdale · England
Bath Re-enamelling for Tinker Hey homes
Bath re-enamelling across Tinker Hey and nearby, done in a single visit in most cases.
- Resurfacing from £350
- Lots of chips and rust spots
- Brown or grey marks that do not clean off
The process
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job normally takes a full day. We tidy up before we leave and tell you when it’s ready to use.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Getting ready for the visit
- Have a window or extractor fan available
- Mention any earlier repairs or resurfacing
- Move bottles, mats and clutter away from the area
How to get a price
The quickest way to a price is to send a couple of pictures through our quote form or ring us. We will tell you honestly whether it can be repaired.
Read more
Bath re-enamelling in Tinker Hey, done in place
Re-enamelling is a one-day job for most baths, and you can use the bath the day after. Nothing is disconnected or removed. Our technicians work on acrylic baths, basins & shower trays and pressed steel baths, and people most frequently call us about worn patches where water runs and sits and several chips and rust patches.
Big or small, it’s backed by a one-year guarantee in Tinker Hey and across Calderdale.
- Area
- Tinker Hey (HX3, HX6, HX4)
- County
- Calderdale
- Guarantee
- One year on every repair
- Price
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Questions from Tinker Hey
Can you resurface a pink bath in white?
Yes, white is the usual choice. Mention the colour you want when you send pictures.
What if the damage is worse than the pictures show?
If we find something the photos didn’t show, we explain it first. You decide whether to go ahead.
Do you come to Tinker Hey?
Yes, we do. We send a technician to Tinker Hey for every job, and the price is the same as everywhere else.
Are you accredited?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
What information do you need?
Some pictures, your postcode and how to reach you. On the day, access to the room.
Will there be a smell?
Some materials have a smell while they’re applied, so we ventilate the room. It clears as the materials cure.
Does someone need to be in?
Someone needs to let us in and show us the job. You don’t need to watch us work.
How do I get a price for bath re-enamelling in Tinker Hey?
Prices start from £350. Every job gets a fixed price from your photos. Send a close-up of the damage and a wider photo and your postcode.
Why repair rather than replace?
If the bath is sound, re-enamelling is generally much cheaper than replacing it, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s much quicker too. Resurfacing from £350, with every job priced individually. A repair typically costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.
Why us?
- Nothing taken out or refitted
- Colour mixed on the day to match
- CHAS, Constructionline and SafeContractor accredited
- One visit for most repairs
Read our prices page and bath cost comparison.
When a repair is not the answer
Not everything can be repaired, and we would rather say so up front. Repairs will not solve:
- Plumbing leaks, which need a plumber
- A cast iron or steel bath that is cracked right through
- An acrylic bath that flexes badly underfoot
If in doubt, send pictures and we will say what we think.
Materials we work on in Tinker Hey
- Acrylic baths
- Cast iron baths
- Pressed steel baths
- Basins & shower trays
- Victorian roll-tops
DIY kit or professional repair?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
How to care for the repair
Once the work has cured, treat it gently:
- A dripping tap should be fixed promptly
- Keep toiletries on a shelf rather than in the bath
- Don’t leave a chip unrepaired
- Never use suction bath mats
A quick rinse and wipe after use helps, particularly where water is hard, so limescale cannot build up.
Leave a peeling coating alone. Water gets under it and the damage spreads, so have it stripped and resurfaced.
Common problems we fix in Tinker Hey
Enamel does not fail overnight. Years of cleaning, hard water and hot baths dull the surface, starting where water runs and sits.
It’s worth getting a quote if you see:
- A bath in a colour that no longer suits
- A bath that stays dull however much you clean it
- Worn patches where water runs and sits
- A period or roll-top bath worth keeping
What to look for in a quote
- Whether there are any call-out or travel charges
- How soon you can use it again
- How your room will be protected
- What aftercare is recommended
What bath re-enamelling costs
Prices start from £350. We don’t charge extra for travel to Tinker Hey. The price depends on:
- The material
- Whether it’s a chip, crack, burn or wear
- Whether we combine several jobs
- Any earlier repairs that need removing first
The price depends on the type and amount of damage, the material and how many items we do on one visit. You get a fixed price from your photos, so there are no surprises on the day.
Getting a price from pictures
It only takes a minute to photograph the damage, and it saves a visit. Try to send:
- One sharp close-up of the damage
- Where you are, by postcode
- A coin beside the damage so we can judge size
- What it’s made of, if you know
There is no need for us to visit first. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we will reply with a fixed quote.
For landlords and businesses
Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
Letting agents frequently send us pictures straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
About Tinker Hey
Tinker Hey is about 1 mile south of King Cross, in Calderdale. We agree a date that works for you, and we’ll give you an arrival time in advance, so there is no waiting around. We work in 129 places across Calderdale. We work right across the region, from Tinker Hey to Leeds (16 miles away).
Jobs in HX3, HX6 and HX4 are booked in the same way as anywhere else. We also travel to Copley (1 mile east), Upper Greetland (1 mile south), Greetland (1 mile south-east), Lindwell (1 mile south-east) and Gate Head (1 mile south). Within a short drive, we also cover Brighouse (4 miles east), Todmorden (9 miles west), Hebden Bridge (6 miles north-west), Akroydon (3 miles north), Wheatley (3 miles north) and Rastrick (4 miles east).
Landmarks near Tinker Hey
Our customers here include homes close to Park Lane Learning Trust, People's Park and Copley Primary School, among other places. Also close by are St Stephen's Church (within half a mile east), Volunteer Arms (0.6 miles east), The Crossley Heath School (1 mile north) and Harrison House (1.8 miles north-east). Tinker Hey’s nearest station is Sowerby Bridge station, roughly 1.2 miles north-west. Well-known places in the area include Calderdale Royal Hospital (1.2 miles north-east) and Crossley House (1.7 miles north). Not far away are Moorside Edge.
Nearby places to Tinker Hey
More services for Tinker Hey
About our accreditations · Every repair comes with a one-year guarantee.
