Central Bedfordshire · England
Bath re-enamelling & resurfacing in Toddington, Central Bedfordshire
Bath re-enamelling across Toddington and nearby, typically in one visit and guaranteed for a year.
- Resurfacing from £350
- Several chips and rust patches
- A bath in a colour that no longer suits
How we handle bath re-enamelling in Toddington
After cleaning, repairing and priming, we spray on the new finish. Most of the work, and most of the durability, is in the preparation, and we take our time over it. We’re often asked to fix a coloured bath you want in white and a peeling or bubbling previous coating, in Victorian roll-tops, pressed steel baths and cast iron baths.
Every repair is covered by a one-year guarantee.
- Area
- Toddington (LU5)
- Region
- Central Bedfordshire
- Warranty
- 12 months on all our work
- Quote
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Landlord and trade work in Toddington
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
If you manage property in Toddington, we’ll quote for several properties at once. Just send photos for each address and we’ll come back with a combined price.
The process
From the moment we arrive, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the job takes a full day, depending on what we find, and we finish with a tidy-up and a look at the finished work together.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- We key the surface and put on a bonding primer.
- Several coats of new finish are sprayed on.
- Once cured, normally by the day after, the bath is ready.
Getting ready for the visit
- Clear the area around the damage
- Ensure the area is dry
- Keep children and pets away from the room on the day
Getting a price
Pricing is simple: snap the damage close up and then the whole item, send them over with your postcode, and we’ll reply with a fixed price. Quotes are free and no obligation.
Read more
What your bath is made of matters
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s the part we put right.
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.
Your questions about bath re-enamelling in Toddington
What does bath re-enamelling cost?
Resurfacing from £350. Every job gets a fixed quote based on pictures of the damage. Send a close-up and a photo of the entire item with your LU5 postcode.
Is it worth repairing rather than replacing?
Usually, when the rest is in good condition. A repair avoids removal and making good. If replacing would be better, we will say so.
Is it messy?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
What happens after I send photos?
You’ll get a fixed quote back, typically with dates to choose from. There’s no obligation to book.
Do you need to take the bath out?
No. We resurface it in place, so the tiles and taps stay put.
Are there extra charges for Toddington?
There is no separate call-out charge. The fixed price covers the visit and the work.
What do you need from me?
Send pictures through the quote form or call 0345 017 0787, and we will do the rest.
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Why repair rather than replace?
Replacing the bath means a plumber, lifting out the old bath, making good the walls and tiles and days without a bathroom. Re-enamelling gives the bath a new finish without moving it. Our bath re-enamelling starts from £350. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you will get a fixed figure.
Why Toddington customers choose us
- A fixed quote before booking
- Dust sheets down, tidy finish
- Everything repaired in place
- We come to you, anywhere in the UK
Take a look at our full price list and resurfacing vs replacement cost guide.
Signs you need bath re-enamelling in Toddington
In hard water areas, limescale and the cleaning it needs wear enamel faster, and gritty cleaners are the worst culprits.
You may need us if you’ve spotted:
- A coloured bath you want in white
- Thin, worn enamel in places
- An old resurfacing that is failing
- Chips and rust in more than one place
What your quote should include
- Who turns up on the day
- How long it needs to cure
- How long the guarantee is and what it covers
- Whether the colour is mixed to match
More services for Toddington
How we price bath re-enamelling
Prices start from £350. There are no hourly rates or hidden extras. The price depends on:
- How many areas need work
- The type of damage
- Doing more than one item at once
- Where the damage is and how we get to it
No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
How to get a fixed quote
Phone photos are fine, there’s no need for anything special. Make sure they show:
- Daylight if possible, and no flash reflection
- Your postcode, so we can check dates
- One sharp close-up of the damage
- Any details about the material
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we will send back a fixed quote and some dates.
What we can’t put right
We’ll always be straight with you, so here’s what a repair can’t fix:
- Leaking taps or wastes (a plumber’s job)
- Damage hidden under a previous coating, until it’s stripped back
- Holes rusted through the metal
If in doubt, send photos and we will say what we think before you book.
What we work on
- Basins & shower trays
- Cast iron baths
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
Keeping it looking good
Simple care helps the repair last. Our advice:
- Dry the bath after use to stop limescale
- Wash away dyes and oils after use
- Clean with a soft cloth and mild detergent
- Fix dripping taps quickly
Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.
On a worn bath, rust spots keep spreading. Resurfacing before they spread keeps it simpler.
Our work in Toddington
Toddington is about 3 miles north of Houghton Regis, in Central Bedfordshire. We travel to homes and businesses in Toddington and the surrounding area, so nothing has to leave your home. Our technicians cover 121 places in Central Bedfordshire. You can also see our page for London, about 36 miles away.
We work across LU5. You’ll find streets such as High Street, Market Square and Church Square, and we cover them all. Nearby, we also work in Fancott (1 mile south-east), Tebworth (1 mile south-west), Wingfield (1 mile south), Chalton (2 miles south-east) and Linmere (2 miles south-east). Further out, we also cover Leighton Buzzard (5 miles west), Dunstable (4 miles south), Houghton Regis (3 miles south), Flitwick (4 miles north), Linslade (6 miles west) and Shefford (11 miles north-east).
Near you in Toddington
Typical jobs here are in homes near Toddington St George Church of England School, Houghton Regis Academy and Church of St George and the streets around them. Toddington’s nearest station is Harlington station, about 2 miles north-east of the centre. Further afield, we also cover the area around South Bedfordshire (2.1 miles south) and Chalgrave Castle (0.7 miles south). The countryside around Toddington includes Smithcombe Hill and Dropshort Marsh.
About our accreditations · Every repair comes with a one-year guarantee.
