Glasgow · Scotland
Bath re-enamelling & resurfacing in Townhead, Glasgow
We travel to Townhead for full bath re-enamelling and resurfacing. Everything is done in place, with a one-year guarantee.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- Wear marks under the taps
How we handle bath re-enamelling in Townhead
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. Several coats of finish go on over a bonding primer, once the bath has been cleaned, repaired and prepared. We work on cast iron baths, acrylic baths and Victorian roll-tops, and the jobs we see most are a roll-top that’s seen better days and enamel that’s lost its shine and feels rough.
The work is covered for a year after we finish. Just call us if there’s a problem and we will come back.
- Where
- Townhead (G2, G1, G4)
- County
- Glasgow
- Warranty
- 12 months on all our work
- Price
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Townhead questions
Can you resurface a pink bath in white?
Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.
Do I have to be there?
Yes. We need access to the room while we work, at a time we agree with you.
Can a failed resurfacing be redone?
Typically, yes. We strip the failing coating and resurface it properly. Mention it when you send photos.
How soon can you come?
We will give you dates with your quote. Tell us if you need it done quickly.
Are you a vetted contractor?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Will there be fumes?
A little, during the work. We set up ventilation and the smell fades as it cures.
Can you do the outside of a roll-top?
Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.
I’m a tenant. Can you help?
Yes, but check with your landlord or agent first. Landlords are frequently glad to have it sorted.
Where we work around Townhead
Townhead is about 1 mile north-east of Glasgow, in Glasgow. Book a date that suits you, and we will give you an arrival time in advance, so there’s no waiting around. Townhead is one of 183 towns and villages in Glasgow we cover.
Our visits in G2, G1 and G4 work the same way as everywhere else we cover. You will find streets such as High Street, Dundas Lane and Renfrew Lane, and we cover them all. With the A804 close by, Townhead is easy for our technicians to reach. Neighbouring places we cover include Cowcaddens (1 mile north-west), Sighthill (1 mile north-east), Port Dundas (1 mile north-west), Royston (1 mile north-east) and Blythswood Hill (1 mile west). Further out, we also cover Kelvinside (3 miles north-west), Hyndland (3 miles west), Langside (3 miles south-west), Yoker (6 miles west), Mount Florida (3 miles south) and Hillpark (4 miles south-west).
Around Townhead
Around Townhead, we work in homes near St Vincent Street Church, Allan Glen's School and Glasgow. Nearby too are 55-57 Cochrane Street pub (under half a mile south), Kelvingrove Park (1.6 miles west) and Andersonian Library (within half a mile south-east). There’s a railway station in Townhead itself: Glasgow Queen Street station. A little further out are Glasgow Lock Hospital (less than half a mile south-east) and Princes Square (0.5 miles south-west). Not far away are Hogganfield Loch.
When a repair is not the answer
A few problems are outside what a surface repair can do:
- An acrylic bath that flexes badly underfoot
- Steel that has corroded right through
- Problems we cannot see until an old finish comes off
If in doubt, send photos and we will say what we think before booking.
What we work on
- Victorian roll-tops
- Basins & shower trays
- Cast iron baths
- Pressed steel baths
- Acrylic baths
How to care for the repair
A little care keeps the finish looking good. We recommend:
- Stick to gentle, non-abrasive cleaners
- Wipe the bath dry after use in hard water areas
- Avoid suction-cup mats
- Rinse off hair dye, oils and bath bombs straight away
A quick rinse and wipe after use helps, especially in hard water areas, so limescale can’t build up.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
Common problems we fix in Townhead
Enamel doesn’t fail overnight. Years of cleaning, hard water and hot baths dull the surface, starting where water runs and sits.
These are the problems we’re asked about most:
- Several chips and rust patches
- Wear marks under the taps
- A bath that stays dull however much you clean it
- An original cast iron bath that needs restoring
What to look for in a quote
- What aftercare is recommended
- Whether cleaning and preparation are in the price
- How the room is protected while they work
- What the guarantee covers, and for how long
DIY kit or professional repair?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send photos.
Why repair rather than replace?
Replacing a cast iron bath is a big job: they’re heavy, frequently need breaking up, and a new one isn’t cheap. Resurfacing in place avoids that entirely. Prices start from £350. Instead of hourly rates, we fix the price before we start. Damage, material and access decide it.
Why choose Surface Doctor in Townhead
- One-year guarantee on every repair
- A fixed quote before booking
- Accredited with CHAS, Constructionline and SafeContractor
- We’ll tell you if it’s not worth repairing
Read our pricing and resurfacing vs replacement cost guide.
Towns and villages near Townhead
Also in Townhead
How we price bath re-enamelling
Prices start from £350. You won’t pay by the hour. The price is based on:
- The size and number of damaged areas
- The material and finish
- Any earlier repairs that need removing first
- Whether it’s a chip, crack, burn or wear
A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Quotes from your pictures
Almost every job we do is priced from pictures. This is what we need:
- Whether it’s been repaired or coated before
- The postcode, so we can plan the visit
- Good light, ideally daylight, without flash glare
- The material, if you know it
There’s no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
What we do, step by step
Once we are through the door, we keep the work contained to the one room. Surfaces nearby are masked off, the job takes the best part of a day, depending on what we find, and we finish with a tidy-up and a look at the finished work together.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure.
Preparing for the visit
- Let the surface dry out before the visit
- Keep children and pets away from the room on the day
- Let us know which floor the room is on
Getting a price
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through, and you will get a fixed figure back.
Related advice
Different materials, different repairs
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Steel often rusts by the plughole, so we pay close attention there.
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so a new finish makes them look new again.
About our accreditations · Every repair comes with a one-year guarantee.
