Lancashire · England
Bath Re-enamelling in Laneshaw Bridge
We travel to Laneshaw Bridge for full bath re-enamelling and resurfacing. Everything is done in place, and the work is guaranteed.
- Resurfacing from £350
- Thin, worn enamel in places
- An original cast iron bath that needs restoring
Bath re-enamelling in Laneshaw Bridge without replacing anything
Many of the baths we re-enamel are period roll-tops, which are heavy, hard to move and costly to replace. Resurfacing them in place keeps the original bath. Typical jobs include stains that won’t shift and a coating lifting around the plughole, on cast iron baths, pressed steel baths and acrylic baths.
Every repair is covered by our one-year guarantee, wherever you are in Lancashire.
- Location
- Laneshaw Bridge (BB8)
- Region
- Lancashire
- Guarantee
- One year on every repair
- Quote
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
DIY kit or professional repair?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is typically cheaper.
A DIY attempt is not a disaster. We remove the old filler and start again, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send photos.
Laneshaw Bridge questions
Does the bath have to be removed?
No. We resurface it in place, so the tiles and taps stay put.
What information do you need?
Some photos, your postcode and how to reach you. On the day, we only need access to the room.
Are there extra charges for Laneshaw Bridge?
Travel is included in the price, with the same prices everywhere we work.
Is there a guarantee?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
What happens once I’ve sent photos?
We check the damage, the material and your postcode, then reply with a quote.
Will it make a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
How long is the bath unusable?
One day for most baths and can be used the day after. We give you timings with the quote.
Is there a smell?
A little, during the work. We set up ventilation and the smell fades as it cures.
When to call us in Laneshaw Bridge
Enamel’s shine is only skin deep, and every scrub with an abrasive cleaner takes a little away. Eventually the surface turns porous and stains.
Keep an eye out for any of the following:
- A period or roll-top bath worth keeping
- A coloured bath you want in white
- An old resurfacing that is failing
- Staining under the taps and around the waste
Comparing quotes
- When it can be used again
- Whether the colour is mixed to match
- What happens if they find more damage
- What protection goes down before work starts
Prices and what affects them
Prices start from £350. We don’t charge extra for travel to Laneshaw Bridge. The price depends on:
- Any earlier repairs that need removing first
- Where the damage is and how we get to it
- What kind of damage it is
- Doing more than one item at once
Compared with replacing, a repair is typically a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Getting a price from photos
You can generally get a fixed price without us visiting. To make it quick:
- A photo taken from further back
- A clear, close picture of the problem area
- A coin beside the damage so we can judge size
- Good light, ideally daylight, without flash glare
Getting a price is easy: take a close-up of the damage and a picture from further back, send them over with your postcode, and we will reply with a fixed quote. There is no charge for the quote and no obligation.
Materials and what they mean for the repair
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. The bath needs to be firm and well supported.
Keeping it looking good
Aftercare is simple, and it makes a real difference:
- Do not use the bath until it has fully cured
- Don’t leave a chip unrepaired
- Do not let dyes or oils sit on the finish
- Do not leave bottles, razors or sponges standing on the surface
Use mild, non-abrasive cleaners, avoid suction bath mats, and do not leave bottles or razors standing on the surface.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
Where we work around Laneshaw Bridge
Laneshaw Bridge is about 2 miles east of Colne, in Lancashire. Our technicians come to clients in Laneshaw Bridge and the surrounding area, so nothing has to leave your home. Laneshaw Bridge is one of 482 towns and villages in Lancashire we cover. We work right across the region, from Laneshaw Bridge to Leeds (about 24 miles away).
All of BB8 is covered, from the main roads to the quietest streets. From Emmott Lane, School Lane and Keighley Road or a nearby road, we can come to you. Other places close to Laneshaw Bridge include Monkroyd (1 mile east), Winewall (1 mile south-west), Trawden (1 mile south-west), Colne (2 miles west) and Foulridge (2 miles north-west). Further out, we also cover Burnley (7 miles south-west), Accrington (13 miles south-west), Nelson (4 miles south-west), Rawtenstall (13 miles south-west), Clitheroe (11 miles west) and Haslingden (14 miles south-west).
What’s near Laneshaw Bridge
Around Laneshaw Bridge, we work in homes near Christ Church, Colne Park High School and Laneshaw Bridge Primary, among other places. For rail, the closest station is Colne station, about 2.6 miles west. A little further out are Pendle Community Hospital (4.1 miles south-west) and Colne Public Library And Museum (2.4 miles west). Green spaces nearby include Noyna Hill.
What happens on the day
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job usually takes most of the day. We clean up when we’re done and tell you when it’s ready to use.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
How to prepare
- Mention if the room is upstairs or in a flat
- Make sure the area is dry
- Tell us about parking, stairs or access
How to get a price
Send us a picture of the damage and one of the whole item, with your BB8 postcode, and we’ll reply with a fixed quote.
Read more
Honest limits
We would rather lose a job than do one that will not last, so here’s what a repair can’t put right:
- Holes rusted through the metal
- Problems we can’t see until an old finish comes off
- An acrylic bath that flexes badly underfoot
Not sure? Send pictures and we’ll give you a straight answer before booking.
What we work on
- Basins & shower trays
- Cast iron baths
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
For landlords and businesses
Landlords, letting agents and housing providers in Laneshaw Bridge use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it normally costs far less than a refit.
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
Also in Laneshaw Bridge
About our accreditations · Every repair comes with a one-year guarantee.
