Birmingham · England

Bath Repair for Tudor Hill homes

Local bath repair for Tudor Hill: photo quotes, tidy work and a year’s guarantee.

  • Repairs from £95
  • Deep scratches in acrylic
  • Impact holes in acrylic
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair for Tudor Hill homes

Bath repair in Tudor Hill, done in place

Most bath damage, from chips and cracks to rust spots and holes, can be repaired with the bath left exactly where it is. Nothing is unplumbed, your tiles stay as they are, and the finish is matched to the rest of the bath. We are frequently asked to fix rust by the waste and overflow and a cracked acrylic bath, on roll-top & freestanding, whirlpool & spa baths and cast iron enamel.

Whatever the size of the job, you get the same one-year guarantee in Tudor Hill and across Birmingham.

Before and after: a damaged acrylic bath corner repaired in place
Location
Tudor Hill (B73, B74, B72)
Region
Birmingham
Warranty
12 months on all our work
Quote
From £95. Free and fixed, from your pictures
Call
0345 017 0787
Last updated
23 October 2026

Repairing versus replacing in Tudor Hill

A repair makes sense whenever the damage is localised. It costs far less than a new bath plus fitting, it’s done in one visit, and the bathroom stays exactly as it is. Our bath repair starts from £95. A repair is priced on what needs doing, not your postcode. You will see the full price before booking, with nothing added on the day.

Why us?

  • Straight answers about what a repair can do
  • No need to remove anything
  • One visit for most repairs
  • Colour-matched on site

Take a look at our prices page and resurfacing vs replacement cost guide.

What we do, step by step

Visits start with a quick look at the job together. Then the area is sheeted and masked and we start. It normally takes a few hours, depending on the damage, and we will keep you posted as we go.

  1. We start by looking at the damage and confirming the plan with you.
  2. Any rust and loose material comes out, and the area is degreased.
  3. We build up the filler in layers, shaping it to the bath.
  4. We tint the finish by hand to match the bath.
  5. Finally, it’s polished to match the shine and left to cure.

Preparing for the visit

  • Mention any parking restrictions or tricky access
  • Tell us if there are stairs or a lift
  • Avoid using the area for a few hours before we arrive

Ask for a price

For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.

Get a free quote

Advice

About Tudor Hill

Tudor Hill is about 1 mile north-west of Royal Sutton Coldfield, in Birmingham. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. Tudor Hill is one of 140 places in Birmingham we cover. We work right across the region, from Tudor Hill to Birmingham (7 miles away).

Postcode districts we cover here: B73, B74 and B72. We regularly work on streets such as Park Road, Manor Road and Tudor Road and the roads around them. Tudor Hill sits on or near the A5127, so getting to you is simple. Close by, we cover Doe Bank (1 mile north-east), Royal Sutton Coldfield (1 mile south-east), Maney (1 mile south), Driffold (1 mile south) and Mere Green (1 mile north). Within a short drive, we also cover Birmingham (7 miles south), Erdington (3 miles south), Lee Bank (7 miles south-west), Cape Hill (8 miles south-west), Paradise (7 miles south-west) and Chinese Quarter (7 miles south-west).

Local landmarks in Tudor Hill

In Tudor Hill, that means homes near The Royal Hotel, St Joseph's Catholic Primary School and Marsh Hill Boys School. You’ll also find Holy Trinity Church (0.6 miles south-east), Sutton Park (1 mile south-west) and Bishop Vesey's Grammar School (0.5 miles east). Tudor Hill has its own railway station: Sutton Coldfield station. Nearby you’ll also find Kingstanding Shopping Centre (2.5 miles south-west) and Good Hope Hospital (0.8 miles east). Green spaces nearby include Bourne Pool and Barr Beacon.

  • Local facilities include Sutton New Hall (2.8 miles south-east)
Map of Tudor Hill © OpenStreetMap contributors

How we price bath repair

Repairs from £95. Every quote is fixed and free. What we look at:

  • What kind of damage it is
  • The material and finish
  • How much damage there is
  • Where the damage is and how we get to it

A repair usually costs much less than people expect, especially compared with replacing and refitting. Send photos and we will give you the exact figure.

How to get a fixed quote

Photographing the damage takes a minute. Try to send:

  • One sharp close-up of the damage
  • Natural light rather than flash
  • A wider photo showing the entire bath
  • Where you are, by postcode

Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can price the job without visiting.

FAQs for Tudor Hill

Can you price it without visiting?

Normally, yes. A close-up and a wider photo are enough to give a fixed price.

What happens next?

We look at the photos and reply with a fixed price and some dates. If anything’s unclear, we’ll ask for another photo.

Is a cracked acrylic bath repairable?

Most of the time. The back of the crack is strengthened before the front is filled and refinished, so access behind the panel is important.

Do you hold any accreditations?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

Is my repair covered?

Every repair comes with a one-year guarantee. Ask us what it covers when you get your quote.

What if the damage is worse than the photos show?

We stop, show you and agree any change before carrying on. You will not be charged for anything you haven’t agreed.

How do I get a price for bath repair in Tudor Hill?

Repairs from £95. Every job gets a fixed quote based on photos of the damage. Send a close-up of the damage and a wider photo with your B73 postcode.

Can you repair several things at once?

Yes. Doing several items on one visit normally costs less than separate visits. Include photos of each item.

Signs you need bath repair in Tudor Hill

Baths take more knocks than people expect: bottles, shower heads and razors are dropped every day, and taps and wastes are tightened against the surface. Over time, chips and rust spots are almost inevitable.

You may need us if you’ve spotted any of these:

  • Deep scratches in acrylic
  • Rust by the waste and overflow
  • A chipped rim or side
  • Damage beneath the taps

Questions to ask before booking

  • Whether the price is fixed and includes VAT
  • How to care for the finish
  • How long it needs to cure
  • Whether the colour is mixed to match

How to compare quotes

Keeping it looking good

Aftercare is simple, and it makes a real difference:

  • Put a towel in the bath if you’re working above it
  • Avoid scourers, wire wool and gritty cream cleaners
  • Give the bath a quick rinse after use
  • Get a dripping tap fixed promptly

Leave the repair to cure for as long as we say before running a bath. From then on, mild cleaning is all it needs.

A small chip is a quick job. Leave them and they collect dirt, stain and, on metal baths, rust, so it’s worth getting them done early.

Should I try a DIY kit first?

For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.

If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send pictures.

Different materials, different repairs

Pressed steel

Steel baths are lighter than cast iron, but have a similar enamel surface. Exposed steel rusts fast, especially around the waste, so repair chips early.

Composite and resin

Composite baths are dense and solid, and often freestanding. Chips and scratches can be filled and colour-matched, in much the same way.

What a repair can’t fix

Honesty matters more than a booking, so here’s what a repair cannot fix:

  • A steel bath rusted through
  • Leaks from the waste or overflow fittings (a plumber’s job)
  • A bath worn all over, where resurfacing makes more sense

If in doubt, send photos and we will say what we think.

Surfaces we repair

  • Acrylic
  • Pressed steel enamel
  • Whirlpool & spa baths
  • Cast iron enamel
  • Roll-top & freestanding
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.