Neath Port Talbot · Wales
Bath re-enamelling & resurfacing in Tynewydd, Neath Port Talbot
Problem with your bath in Tynewydd? We put it right where it is, mix the colour on the day and guarantee the work for a year.
- Resurfacing from £350
- Chips and rust in more than one place
- An old resurfacing that’s failing
Bath re-enamelling in Tynewydd without replacing anything
We re-enamel a lot of period and roll-top baths, which are heavy, hard to move and costly to replace. Resurfacing them in place keeps the original bath. Our repair technicians work on basins & shower trays, cast iron baths and acrylic baths, and the jobs we see most are brown or grey marks that don’t clean off and a peeling or bubbling previous coating.
Every job is backed for twelve months, and the guarantee is the same wherever you live. We return to put right any problem with the work.
- Where
- Tynewydd (SA10)
- Area hub
- Neath Port Talbot
- Guarantee
- A year, on every repair
- Price
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Aftercare tips
To keep it looking its best for years:
- Don’t leave bottles, razors or sponges standing on the surface
- Never use suction bath mats
- Repair dripping taps early
- Do not use the bath until it has fully cured
Wipe the bath dry after use where you can, particularly with hard water, and rinse away any product left on the surface.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface and makes resurfacing more work.
Where we work around Tynewydd
Tynewydd is about 9 miles north-east of Neath, in Neath Port Talbot. Anywhere in SA10, we come to you. Our repair technicians cover all 100 towns and villages in Neath Port Talbot.
Our repair technicians cover all of SA10. From Ty Newydd, Mary Street and Heol-y-Waun or a nearby road, a technician can come to you. Nearby, we also work in Seven Sisters (1 mile south-west), Pant-y-cwrt (1 mile north), Caehopkin (2 miles north), Nant-y-cafn (2 miles south-west) and Cae'r Bont (2 miles north-west). We also work in nearby towns such as Neath (9 miles south-west), Port Talbot (13 miles south), Sandfields (13 miles south), Mount Pleasant (9 miles south-west), Baglan Moors (13 miles south) and Sandfields West (13 miles south-west).
Around Tynewydd
Locally, our jobs take us to homes close to Blaendulais Primary School, among other places. A little further out are Ystradgynlais Community Hospital (2.8 miles west) and Neath Upper (2.7 miles east). The countryside around Tynewydd includes Mynydd y Drum and Pant Mawr Pool.
Tynewydd: your questions answered
Will the bath be moved?
No, it stays where it is. We work on the bath in place, with the room protected and ventilated.
It’s been repaired before. Can you still fix it?
Generally, yes. Tell us what was done before and we will plan for it.
Will the new finish last?
That depends on preparation and how the bath is treated. With good preparation and gentle cleaning it lasts a long time, and our work is guaranteed for a year.
What if the damage is worse than the pictures show?
We’ll show you and explain before doing anything extra. You will not be charged for anything you haven’t agreed.
Are you accredited?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Is there a guarantee?
Every repair comes with our one-year guarantee. We’ll explain what it covers when we quote.
Is a repair better than a new one?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it is not worth repairing, we will tell you.
Can a failed resurfacing be redone?
Yes. Stripping the old coating adds time, so it’s reflected in the quote.
What a repair can’t fix
Not everything can be repaired, and we would rather say so up front. Repairs will not solve:
- Holes rusted through the metal
- A bath split right through the body
- Leaks from fittings rather than the bath
Not sure? Send photos and we’ll give you a straight answer before you book.
What we work on
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
Repairs by material
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. It must be solid and not flex underfoot.
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we check it carefully.
How it works
There’s not much you need to do on the day. Let us in and show us the room, and we will take it from there. Most visits take a full day, tidy-up included.
- First we protect the bathroom and set up ventilation.
- The bath is cleaned, degreased and any chips or rust repaired.
- The surface is prepared and a bonding primer applied.
- Several coats of new finish are sprayed on.
- The bath is left to cure and can usually be used the following day.
How to prepare
- Mention if the room is upstairs or in a flat
- Plan for the room to be out of bounds to pets and children
- Tell us about any previous repairs or coatings
Get a quote
You don’t need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed quote.
Read more
Towns and villages near Tynewydd
More services for Tynewydd
For landlords and businesses
For developers and builders, we fix damage before handover. We can visit several plots in one trip to keep costs down.
If you manage property in Tynewydd, we can repair and quote for several addresses together. Send photos for each one and we’ll come back with a combined price.
Prices and what affects them
Prices start from £350. There’s no area surcharge for Tynewydd. The price reflects:
- Whether it’s a chip, crack, burn or wear
- How many areas need work
- What the surface is made of
- Previous DIY repairs that have to come out
A repair is priced on what needs doing, not your postcode. You’ll see the full price before booking, with nothing added on the day.
How to get a fixed price
Most quotes are done from photos alone. To make it quick:
- A coin or ruler next to the damage for scale
- Daylight if possible, and no flash reflection
- Your postcode, so we can check dates
- Details of any past repairs
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed quote without visiting.
DIY repairs versus a professional job
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
Do you need bath re-enamelling in Tynewydd?
Enamel wears gradually. Abrasive cleaners, limescale and years of use dull the surface, typically first under the taps and around the waste.
The most common problems we’re called about are:
- A bath that stays dull however much you clean it
- A coating lifting around the plughole
- An outdated colour you’d like to change
- Worn patches where water runs and sits
What your quote should include
- Whether the price is fixed and includes VAT
- How the colour is matched
- What preparation is included
- Whether a trained technician does the job
About our accreditations · Every repair comes with a one-year guarantee.
