Worcestershire · England

Bath Re-enamelling for Good's Green homes

Full bath re-enamelling and resurfacing in Good's Green, carried out at your home and guaranteed for a year.

  • Resurfacing from £350
  • A coating lifting around the plughole
  • Lots of chips and rust spots
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath re-enamelling in Good's Green

How we price bath re-enamelling

Prices start from £350. Prices are worked out job by job, from your photos. The main factors are:

  • The colour and finish to match
  • What kind of damage it is
  • Whether we combine several jobs
  • Whether old repairs or coatings need taking off

Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send pictures and we’ll give you the exact figure.

Getting a price from pictures

You can normally get a fixed price without us visiting. To help us price it:

  • Your postcode, so we can check dates
  • What it’s made of, if you know
  • Something in shot to show the size
  • One picture of the entire bath

Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed price.

About our bath re-enamelling in Good's Green

When a bath is structurally fine but worn out on the surface, re-enamelling is usually the most cost-effective option. There’s no removal, plumbing or tiling involved. Whether it’s an outdated colour you’d like to change and staining under the taps and around the waste, we can help, whatever the material.

The work is guaranteed for twelve months. If there is a problem with the repair within the year, we return and sort it.

Stained basin resurfaced to clean white (before and after)
Area
Good's Green (DY12)
Area hub
Worcestershire
Guarantee
One year on every repair
Quote
From £350. Free, fixed price from pictures
Phone
0345 017 0787
Page updated
23 October 2026

What your bath is made of matters

Acrylic

Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.

Pressed steel

Steel baths re-enamel well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.

Should you replace it?

Replacing a cast iron bath is a big job: they’re heavy, frequently need breaking up, and a new one is not cheap. Resurfacing in place avoids that entirely. Resurfacing from £350, with every job priced individually. No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.

Why us?

  • Dust sheets down, tidy finish
  • Straight answers about what a repair can do
  • We come to you, anywhere in the UK
  • A fixed quote before booking

Read our pricing and resurfacing vs replacement cost guide.

When to call us in Good's Green

Sometimes it’s an earlier resurfacing that has failed, peeling around the waste or bubbling. Failing coatings are stripped back before we resurface.

Signs it’s time to call us include:

  • A peeling or bubbling previous coating
  • Staining under the taps and around the waste
  • A period or roll-top bath worth keeping
  • A bath that stays dull however much you clean it

Questions to ask before you book

  • Whether they match the colour on site
  • What the guarantee covers, and for how long
  • Whether there are any call-out or travel charges
  • What happens if they find more damage

10 questions to ask before you book

Our work in Good's Green

Good's Green is about 4 miles north-west of Kidderminster, in Worcestershire. Jobs in Good's Green are booked in like any other job: a fixed price from your pictures, then a visit to do the work. We work in all 376 towns and villages across Worcestershire. We work right across the region, from Good's Green to Birmingham (about 18 miles away).

Here we cover the DY12 postcode area. Close by, we cover Shatterford (1 mile north-east), Nash End (1 mile north-west), Upper Arley (1 mile west), Romsley (1 mile north) and Stanley (3 miles north-west). Larger places within reach include Kidderminster (4 miles south-east), Bromsgrove (13 miles south-east), Droitwich Spa (13 miles south-east), Stourport-on-Severn (6 miles south), Bewdley (3 miles south) and Chawson (13 miles south-east).

Around Good's Green

In Good's Green, that means homes near Red Lion pub, among other places. The closest station to Good's Green is Kidderminster station, about 4.4 miles south-east of the centre. A little further out are Kidderminster Hospital and Treatment Centre (3.6 miles south-east) and Crundles Farm (2.5 miles south). Open spaces near Good's Green include Kinver Edge.

Map of Good's Green © OpenStreetMap contributors

When we’d advise against a repair

We’d rather lose a job than do one that won’t last, so here’s what a repair can’t put right:

  • A metal bath with a through crack
  • Holes rusted through the metal
  • Anything hidden under an old coating, until we remove it

Not sure? Send photos and we will give you a straight answer.

Surfaces we repair

  • Acrylic baths
  • Basins & shower trays
  • Cast iron baths
  • Pressed steel baths
  • Victorian roll-tops

Looking after it afterwards

So the finish stays in good condition for years:

  • Keep toiletries on a shelf rather than in the bath
  • Dry the bath after use to stop limescale
  • A dripping tap should be fixed promptly
  • Never use suction bath mats

Treat the new finish gently at first: let it cure fully, then use mild cleaners only. After that, no abrasives and no suction mats.

If a previous coating is starting to peel, don’t pick at it. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.

FAQs for Good's Green

Can you repair something that’s been repaired before?

Most of the time. Let us know what was used before.

Can you make a coloured bath white?

Yes, white is the usual choice. Mention the colour you want when you send pictures.

Is there a smell?

A little, during the work. We set up ventilation and the smell fades as it cures.

Do you charge for travel?

There is no separate call-out charge. The fixed price covers the visit and the work.

Is the work guaranteed?

Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.

Can you re-enamel a roll-top bath?

Yes. Inside and out if you’d like.

Is a repair better than a new one?

Generally, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. We’ll tell you honestly if replacement makes more sense.

Will there be a smell?

There can be some smell while we work. It clears as the materials cure.

What we do, step by step

From the moment we arrive, we keep the work contained to the one room. Surfaces nearby are masked off, the job takes the best part of a day, and we finish by cleaning up and talking you through the result.

  1. The bathroom is protected and ventilation set up.
  2. Old sealant is cut out and the bath is deep cleaned.
  3. We repair chips, rust spots and pitting.
  4. We key the bath and apply a bonding primer.
  5. The new finish is sprayed on in several coats and left to cure until the day after.

How to prepare

  • Mention if the room is upstairs or in a flat
  • Keep pets and children out of the room while we work
  • Let us know if it has been repaired before

Get a quote

Pricing is simple: take a close-up of the damage and a picture from further back, send them over with your postcode, and you’ll get a fixed quote back. There’s no charge for the quote and no obligation.

Get a fixed price

Related advice

Should I try a DIY kit first?

If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it does not stop a professional repair. Just mention it when you send pictures, as it can add time.

It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.