Wiltshire · England
Bath Re-enamelling for Upper Castle Combe homes
Bath re-enamelling in Upper Castle Combe without the cost of replacing. Get a fixed quote from your pictures, then we come to you.
- Resurfacing from £350
- Wear marks under the taps
- A bath that stays dull however much you clean it
Bath re-enamelling in Upper Castle Combe without replacing anything
The bath stays where it is, so your taps, tiles and plumbing are left alone. It normally takes one visit, with the bath ready to use the following day. If you’re dealing with a dull, rough surface that won’t come clean and brown or grey marks that don’t clean off, we can help, on pressed steel baths, cast iron baths and acrylic baths alike.
Every job is backed for twelve months in Upper Castle Combe and everywhere else. If something goes wrong with the work, we come back.
- Where
- Upper Castle Combe (SN14)
- Region
- Wiltshire
- Cover
- One year on every repair
- Quotes
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Repair or replace: which is better?
When the bathroom is fine apart from the bath’s finish, resurfacing is the simplest answer. Nothing else is disturbed. Prices start from £350. A repair is priced on what needs doing, not where you live. You’ll see the full price before booking.
Why book with us
- Colour mixed on the day to match
- Honest advice, even when it means no job
- Free fixed quotes from pictures
- No extra charge for your area
Read our full price list and bath cost comparison.
Places near Upper Castle Combe
Also in Upper Castle Combe
What we are called out for in Upper Castle Combe
Previous coatings can fail too, peeling around the waste or bubbling. We strip what’s failing and start again.
It’s worth getting a quote if you see:
- Brown or grey marks that do not clean off
- Enamel that’s lost its shine and feels rough
- Chips and rust in more than one place
- A coating lifting around the plughole
Comparing quotes
- How long the guarantee is and what it covers
- What happens if the damage is worse than the photos show
- What prep work is covered
- Whether there are any call-out or travel charges
How we price bath re-enamelling
Prices start from £350. You’ll know the full cost before booking. We look at:
- Previous DIY repairs that have to come out
- How easy the damage is to reach
- The type of damage
- Doing more than one item at once
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you’ll get a fixed figure.
Quotes from your photos
When you take your pictures, these tips help us give you a firm price:
- Any earlier repairs or coatings
- Daylight if possible, and no flash reflection
- A coin or ruler next to the damage for scale
- A clear, close picture of the problem area
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
What we can’t put right
A repair is not right for every job, including:
- A poorly supported acrylic bath, until it’s firmed up
- A bath split right through the body
- Plumbing leaks, which need a plumber
Not sure? Send pictures and we’ll give you a straight answer.
Surfaces we repair
- Cast iron baths
- Acrylic baths
- Basins & shower trays
- Victorian roll-tops
- Pressed steel baths
How to care for the repair
Aftercare is simple:
- Dry the bath after use to stop limescale
- Do not use the bath until it has fully cured
- Never use suction bath mats
- Don’t leave bottles, razors or sponges standing on the surface
Wait for the curing time we give you before the first bath. After that, a soft cloth and washing-up liquid is all it needs.
Leave a peeling coating alone. Water gets under it and the damage spreads, so have it stripped and resurfaced.
Work for landlords and builders
If you manage property in Upper Castle Combe, we’ll quote for several properties at once. Send photos for each one and we’ll come back with a combined price.
Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
Where we work around Upper Castle Combe
Upper Castle Combe is about 5 miles north-west of Chippenham, in Wiltshire. Wherever you are in the SN14 postcode area, we carry out the work at your property. We cover 425 places in Wiltshire, from the larger towns to small villages. Our nearest city page is Birmingham, about 69 miles away.
Every address in SN14 is within our area, from the main roads to the quietest streets. Local streets include The Street, School Lane and The Old Dairy Drive, all of which we cover. Main roads around Upper Castle Combe include the B4039, which makes travel easy. We also cover the places around Upper Castle Combe: Castle Combe (1 mile south-west), Nettleton (2 miles west), Ford (2 miles south), West Kington (2 miles west) and Slaughterford (2 miles south). We also work in nearby towns such as Trowbridge (12 miles south), Chippenham (5 miles south-east), Calne (10 miles east), Devizes (14 miles south-east), Melksham (9 miles south-east) and Corsham (5 miles south).
Local landmarks in Upper Castle Combe
Locally, our jobs take us to homes close to Church of St Andrew and the streets around them. Further afield, we also cover the area around Chippenham Community Hospital (5.2 miles south-east) and Castle Combe Museum (less than half a mile south-west). Not far away are Vincients Wood.
Different materials, different repairs
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Common questions in Upper Castle Combe
Is there a guarantee?
Yes, for a year. If there is a problem with the work in that time, we come back and put it right.
Can you resurface a pink bath in white?
Yes, white is the usual choice. Mention the colour you want when you send pictures.
What do you need from me?
Photos of the damage, a picture of the whole bath and your postcode. Then we’ll agree a date.
Can you do the outside of a roll-top?
Yes, often. The inside is resurfaced, and we can refinish the outside as well.
What happens if you find more damage?
We stop, show you and agree any change before carrying on. You will not be charged for anything you haven’t agreed.
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Is there a call-out fee?
No. Our quotes include travel, and we charge the same wherever you are.
Do I need to be at home?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
What we do, step by step
You don’t need to empty the room. Everything we use comes in the van with us, lay protective sheets and start once you are happy with the plan. It typically takes a full day, and you can get on with other things while we are there.
- We mask and protect the room and ventilate it.
- The bath is cleaned, degreased and any chips or rust repaired.
- We key the surface and put on a bonding primer.
- We spray several coats of new enamel finish.
- The bath is left to cure and can normally be used the next day.
Getting ready for the visit
- Open a window if you can
- Keep children and pets away from the room on the day
- Let us know if it has been repaired before
How to get a price
For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
