Wiltshire · England
Bath re-enamelling & resurfacing in Slaughterford, Wiltshire
Full bath re-enamelling and resurfacing at your home in Slaughterford, with a one-year guarantee on every repair.
- Resurfacing from £350
- An outdated colour you’d like to change
- Chips and rust in more than one place
About our bath re-enamelling in Slaughterford
The bath stays where it is, so the taps, tiles and plumbing are not touched. It normally takes one visit, and can be used again the next day. We work on pressed steel baths, Victorian roll-tops and acrylic baths, and people most often call us about a roll-top that’s seen better days and worn patches where water runs and sits.
Whatever the size of the job, you get the same one-year guarantee in Slaughterford and across Wiltshire.
- Where
- Slaughterford (SN14)
- Region
- Wiltshire
- Cover
- 12 months on all our work
- Quote
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
DIY kit or professional repair?
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it will not stop us repairing it. It does add a little time, so tell us about it when you send pictures.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
What we do, step by step
Nothing needs to be moved out of the room. Everything we use comes in the van with us, put protection down and get going once we have agreed what we’re doing. Most jobs take a full day, and you can get on with other things while we’re there.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
How to prepare
- Keep pets and children out of the room while we work
- Mention any earlier repairs or resurfacing
- Tell us if there are stairs or a lift
Ask for a price
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we’ll come back with a fixed figure.
Read more
Repairing versus replacing in Slaughterford
Replacing a bath generally involves a plumber, a fitter and a tiler. Re-enamelling takes one technician and normally one day, with the bath ready the day after. Prices start from £350. Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.
Why book with us
- CHAS, Constructionline and SafeContractor accredited
- No extra charge for your area
- A fixed quote before you book
- No need to remove anything
Read our pricing and bath cost comparison.
Do you need bath re-enamelling in Slaughterford?
Sometimes it’s an earlier resurfacing that has failed, peeling around the waste or bubbling. We strip what’s failing and start again.
People typically call us after spotting one of these:
- An original cast iron bath that needs restoring
- Several chips and rust patches
- A bath that stays dull however much you clean it
- Staining under the taps and around the waste
Before you book anyone
- When it can be used again
- Is the price fixed, and does it include VAT?
- Whether they match the colour on site
- What happens if the damage is worse than the pictures show
Covering Slaughterford
Slaughterford is about 4 miles west of Chippenham, in Wiltshire. Whether you are in the middle of Slaughterford or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. Slaughterford is one of 425 towns and villages in Wiltshire where we work. Our jobs stretch from Slaughterford to Birmingham (about 71 miles away).
All of SN14 is within our area, from the main roads to the quietest streets. Neighbouring places we cover include Ford (1 mile north), Biddestone (1 mile east), Thickwood (1 mile south-west), Castle Combe (2 miles north) and Upper Castle Combe (2 miles north). Further out, we also cover Trowbridge (10 miles south), Chippenham (4 miles east), Calne (10 miles east), Devizes (13 miles south-east), Westbury (14 miles south) and Melksham (7 miles south-east).
Near you in Slaughterford
Typical jobs here are in homes near Church of St Nicholas, among other places. For rail, the closest station is Chippenham station, about 4.8 miles east of the centre. Other landmarks nearby include Chippenham Community Hospital (4.4 miles east) and Castle Combe Museum (2.1 miles north). Open spaces near Slaughterford include Vincients Wood.
Towns and villages near Slaughterford
Other services in Slaughterford
Common questions in Slaughterford
How soon can you come?
We will give you dates with your quote. If it’s urgent, say so and we’ll do what we can.
Do you come to Slaughterford?
We do. Technicians travel to Slaughterford from across the region, and the price is the same as everywhere else.
What happens next?
We come back with a fixed quote, usually with dates to choose from. You are under no obligation.
How long does re-enamelling last?
Look after it and it lasts. Avoid abrasive cleaners and suction mats.
How long will the bath be out of use?
Generally a day, then it’s ready to use the following day. A badly pitted bath can need a second day.
Does someone need to be in?
Yes. We need access to the room while we work, at a time that suits you.
Do you work for landlords and businesses?
We do, regularly. We can quote for several properties together and work between tenancies.
Someone resurfaced my bath and it’s peeling. Can you help?
Generally, yes. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.
Aftercare tips
Once the work has cured, treat it gently:
- Store bottles off the bath
- Keep suction mats out of the bath
- Repair dripping taps early
- Clean with a soft cloth and mild detergent
Wipe the bath dry after use where you can, and rinse away any product left on the surface.
On a worn bath, rust spots keep spreading and make the job bigger. It’s simpler to resurface before they spread.
Landlords, agents and businesses in Slaughterford
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We’ll fit around changeovers where we can.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We’re CHAS, Constructionline and SafeContractor accredited.
What your bath is made of matters
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
What bath re-enamelling costs
Prices start from £350. We charge the same across the UK, including Slaughterford. What changes the price is:
- How easy the damage is to reach
- What kind of damage it is
- The material and finish
- The size and number of damaged areas
Our prices are the same across the UK, so there’s no premium for Slaughterford. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Send pictures for a quote
You can usually get a fixed quote without us visiting. To make it quick:
- Good light, ideally daylight, without flash glare
- Your postcode, so we can check dates
- Any earlier repairs or coatings
- A clear, close picture of the problem area
You do not need a survey visit. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
About our accreditations · Every repair comes with a one-year guarantee.
