Wiltshire · England
Bath re-enamelling & resurfacing in Ford, Wiltshire
Fixed-price bath re-enamelling in Ford and the surrounding area, done in a single visit in most cases and guaranteed for a year.
- Resurfacing from £350
- An outdated colour you’d like to change
- Staining under the taps and around the waste
Repair or replace in Ford?
Replacing a cast iron bath is a big job: it’s very heavy, may need breaking up, and the replacement can be costly. Resurfacing in place avoids that entirely. Our bath re-enamelling starts from £350. We don’t add extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Why Ford clients choose us
- Fixed prices from your pictures
- Dust sheets down, tidy finish
- One-year guarantee on every repair
- Nothing taken out or refitted
See our full price list and resurfacing vs replacement cost guide.
Bath re-enamelling in Ford without replacing anything
We re-enamel a lot of period and roll-top baths, which would be difficult and expensive to replace. Doing them in place keeps an original feature. Whether it’s a bath that stays dull however much you clean it and a coloured bath you want in white, we can normally put it right, on basins & shower trays, pressed steel baths and Victorian roll-tops alike.
Every job is backed for twelve months, and the guarantee is the same wherever you live. We return to put right any problem with the work.
- Location
- Ford (SN14)
- Region
- Wiltshire
- Cover
- 12 months on all our work
- Quotes
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Signs you need bath re-enamelling in Ford
In hard water areas, limescale and the cleaning it needs wear enamel faster, and abrasive cleaners do the most damage.
Contact us if you’ve noticed any of these:
- A bath that stays dull however much you clean it
- Wear marks under the taps
- An old resurfacing that is failing
- An original cast iron bath that needs restoring
What your quote should include
- How the colour is matched
- What the guarantee covers, and for how long
- A fixed quote, and whether VAT is included
- Who turns up on the day
Your questions about bath re-enamelling in Ford
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as homeowners.
What information do you need?
Use the quote form or ring 0345 017 0787, and we will do the rest.
Will it make a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
Can you re-enamel a roll-top bath?
Yes. We can do the inside and outside if you’d like.
How much does bath re-enamelling cost in Ford?
Resurfacing from £350. The exact price depends on the damage, so we quote from photos. You’ll get a fixed figure before booking.
Is there a call-out fee?
Travel is included in the price, and we charge the same wherever you are.
What if the damage is worse than the photos show?
We stop, show you and agree any change before carrying on. You won’t be charged for anything you haven’t agreed.
How durable is a resurfaced bath?
A well-prepared finish lasts a long time if it’s looked after. Gentle cleaning, no suction mats.
What else we do in Ford
For landlords and businesses
Landlords, letting agents and housing providers in Ford use us as well as householders. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
Looking after it afterwards
How the surface is treated afterwards matters:
- Don’t use the bath until it has fully cured
- Have chips seen to early
- Use washing-up liquid and a soft cloth
- Keep suction mats out of the bath
Rinse the bath and wipe it over after use, especially in hard water areas, to stop limescale building up.
On a worn bath, rust spots keep spreading, and each one adds to the preparation. Resurfacing before they spread keeps it simpler.
How we price bath re-enamelling
Prices start from £350. We don’t charge extra for travel to Ford. The price depends on:
- The material
- The size and number of damaged areas
- Whether we combine several jobs
- Access to the area
Set against the cost of replacement, a repair is typically a fraction of the price, because there’s no removal, plumbing or making good. The quote lists exactly what you are paying for.
Quotes from your photos
A couple of clear pictures is all it takes. Try to include:
- Natural light rather than flash
- Where you are, by postcode
- What it’s made of, if you know
- Details of any past repairs
Pricing is simple: take a close-up of the damage and a photo from further back, send them to us with your postcode, and we will reply with a fixed price. Quotes are free and you’re under no obligation.
Our work in Ford
Ford is about 3 miles north-west of Corsham, in Wiltshire. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. Our technicians cover 425 places across Wiltshire. We work right across the region, from Ford to Birmingham (70 miles away).
Here we cover the SN14 postcode area. Close by, we cover Slaughterford (1 mile south), Castle Combe (1 mile north), Biddestone (1 mile south-east), Upper Castle Combe (2 miles north) and Thickwood (2 miles south-west). We also work in nearby towns such as Trowbridge (11 miles south), Chippenham (5 miles east), Calne (10 miles east), Devizes (13 miles south-east), Westbury (15 miles south) and Melksham (8 miles south-east).
Landmarks near Ford
Our clients here include homes close to Church of St John, among other places. Ford’s nearest station is Chippenham station, about 4.9 miles east of the centre. Other landmarks nearby include Chippenham Community Hospital (4.6 miles east) and Castle Combe Museum (1.5 miles north). The countryside around Ford includes Vincients Wood.
Repairs by material
Acrylic
Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
What happens on the day
Expect a friendly, tidy visit. We agree the arrival time in advance, cover and mask the work area, then carry out the work, which generally takes most of the day. If we find something your photos didn’t show, we’ll explain it before carrying on.
- We mask and protect the room and ventilate it.
- We clean and degrease the bath and repair any chips or rust.
- We key the surface and put on a bonding primer.
- Several coats of new finish are sprayed on.
- Once cured, normally by the next day, the bath is ready.
Preparing for the visit
- Tell us if there are stairs or a lift
- Tell us about parking, stairs or access
- Plan for the room to be out of bounds to pets and children
Get a quote
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.
Related advice
What we can’t put right
A repair is not right for every job, for example:
- Holes rusted through the metal
- Leaking taps or wastes (a plumber’s job)
- A poorly supported acrylic bath, until it’s firmed up
If in doubt, send photos and we’ll say what we think before booking.
Surfaces we repair
- Acrylic baths
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
About our accreditations · Every repair comes with a one-year guarantee.
