County Durham · England
Bath Re-enamelling for Urpeth homes
Bath re-enamelling across Urpeth and nearby, done in a single visit in most cases.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- Worn patches where water runs and sits
Can I fix it myself?
If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and don’t use it until it has fully cured. If it fails, we can still put it right.
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
How we handle bath re-enamelling in Urpeth
After cleaning, repairing and priming, we spray on the new finish. Most of the work, and most of the durability, is in the preparation, so we do not cut corners on it. If you’re dealing with an outdated colour you’d like to change and a roll-top that’s seen better days, we can normally put it right.
The work is covered for a year after we finish. If anything is not right, ring us and we will come back.
- Area
- Urpeth (DH2)
- Region
- County Durham
- Warranty
- A year, on every repair
- Price
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Prices and what affects them
Resurfacing from £350. Prices are worked out job by job. The main factors are:
- The size and number of damaged areas
- How easy the damage is to reach
- Whether it’s a chip, crack, burn or wear
- Doing more than one item at once
A repair is priced on what needs doing, not where you live. The full price is agreed before booking.
Quotes from your pictures
Photographing the damage takes a minute, and it saves a visit. Please include:
- Whether it’s been repaired or coated before
- What it’s made of, if you know
- Good light, ideally daylight, without flash glare
- A close-up of the damage, in focus
We price from photos so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.
When we would advise against a repair
A few problems are outside what a surface repair can do:
- A poorly supported acrylic bath, until it’s firmed up
- Anything hidden under an old coating, until we remove it
- Plumbing leaks, which need a plumber
Not sure? Send pictures and we will give you a straight answer before booking.
Materials we work on in Urpeth
- Cast iron baths
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
Towns and villages near Urpeth
Other services in Urpeth
Aftercare tips
After the repair has cured, a few habits help it last:
- Fix dripping taps quickly
- Never use suction bath mats
- Dry the bath after use to stop limescale
- Get any chip repaired quickly
Use mild, non-abrasive cleaners, don’t use suction bath mats, and do not leave bottles or razors standing on the surface.
If a previous coating is starting to peel, don’t pick at it. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
Landlords, agents and businesses in Urpeth
Letting agents often send us photos straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Hospitality businesses can’t afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.
How the visit works
Here’s how a visit generally runs: we arrive on time, sheet and mask the area around the job, carry out the work and clear up. Allow a full day from start to finish. Before we go, we will explain when it can be used and what to avoid for the first few days.
- The room is masked, protected and ventilated.
- Next we degrease the bath and fix chips and rust spots.
- We prepare the surface and apply a bonding primer.
- Several coats of new finish are sprayed on.
- Once cured, normally by the day after, the bath is ready.
Before we arrive
- Keep children and pets away from the room on the day
- Point us to the nearest place to park
- Let us know about parking or access
Get a quote
For a price in Urpeth, pictures are the quickest way: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.
Advice
Common problems we fix in Urpeth
Enamel’s shine is only skin deep, and abrasive cleaning slowly wears it away. Eventually the surface turns porous and stains.
Keep an eye out for any of the following:
- An old resurfacing that’s failing
- A dull, rough surface that won’t come clean
- Lots of chips and rust spots
- A roll-top that’s seen better days
Questions to ask before booking
- If travel is included in the price
- How soon you can use it again
- What preparation is included
- What happens if the damage is worse than the pictures show
FAQs for Urpeth
What does bath re-enamelling cost?
Resurfacing from £350. We give a fixed price from your photos. Send a close-up and a picture of the entire item with your DH2 postcode.
Is there a smell?
Yes, while we’re applying the finish. Ventilation keeps it down, and it fades as the finish cures.
How long does re-enamelling take?
Generally one day, with the bath ready the following day. A badly pitted bath can need a second day.
Can you fix a peeling bath coating?
Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.
Is it safe with children and pets around?
On the day, the room should be kept clear of pets and children.
Does someone need to be in?
We need someone to let us in. After that, you can carry on with your day.
Will the price change on the day?
The price is fixed for what the photos show. Anything extra is discussed before we begin.
Can you make a coloured bath white?
Yes, most people go for white. Mention the colour you want when you send photos.
About Urpeth
Urpeth is about 3 miles north-west of Chester-le-Street, in County Durham. We visit homes and businesses in Urpeth, so there is no workshop to go to. We cover all 329 towns and villages across County Durham. We work right across the region, from Urpeth to Newcastle upon Tyne (7 miles away).
We cover every part of the DH2 postcode area. Jobs here include addresses on Bradley Close, Carlton Close and Pickering Walk. If you are just outside Urpeth, we cover Perkinsville (1 mile south), High Urpeth (1 mile south-west), Pelton (1 mile south), High Handenhold (1 mile south-west) and Pelton Fell (1 mile south). Larger places within reach include Durham (7 miles south), Consett (9 miles west), Spennymoor (13 miles south), Seaham (11 miles east), Chester-le-Street (3 miles south-east) and Peterlee (14 miles south-east).
What’s near Urpeth
Our clients here include homes close to Church of the Holy Trinity, Ouston Primary School and Roseberry College, among other places. The nearest railway station is Chester-Le-Street station, about 2.5 miles south-east of the centre. Well-known places in the area include Chester-le-Street (2.3 miles south-east) and Ankers House Museum (2.6 miles south-east).
Repairs by material
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s what we repair.
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Steel often rusts by the plughole, so we check it carefully.
About our accreditations · Every repair comes with a one-year guarantee.
