Medway · England
Bath Re-enamelling in Wainscott
Bath re-enamelling in Wainscott without the cost of replacing. Send us photos for a fixed price, then we come to you.
- Resurfacing from £350
- Lots of chips and rust spots
- A peeling or bubbling previous coating

DIY repairs versus a professional job
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and do not use it until it has fully cured. If it does not work out, we can still repair it properly.
Bath re-enamelling in Wainscott without replacing anything
Most baths are re-enamelled in a day, and you can use the bath the following day. Taps, tiles, panels and plumbing all stay in place. We work on pressed steel baths, basins & shower trays and acrylic baths, and the jobs we see most are enamel that’s lost its shine and feels rough and stains that won’t shift.
We guarantee the work for a year. If something isn’t right in that time, we come back and put it right.

- Where
- Wainscott (ME2, ME3)
- County
- Medway
- Warranty
- 12 months on all our work
- Quote
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Looking after it afterwards
After the repair has cured, a few habits help it last:
- Keep suction mats out of the bath
- Keep toiletries on a shelf rather than in the bath
- Fix dripping taps quickly
- Stick to gentle, non-abrasive cleaners
Dry the bath after use if possible, and rinse off any bath products.
On a worn bath, rust spots keep spreading and make the job bigger. It’s simpler to resurface before they spread.
Landlord and trade work in Wainscott
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
How it works
We begin by going over the job with you, so you know exactly what we’re doing. After that, protection goes down around the work area and the work begins. It normally takes a full day, and we will keep you posted as we go.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures.
Getting ready for the visit
- Let us know about parking or access
- Tell us if there are stairs or a lift
- Clear the area around the damage
Getting a price
Getting a price is easy: snap the damage close up and then the entire item, send them to us with your postcode, and you’ll get a fixed quote back. Quotes are free and no obligation.
Advice
Prices and what affects them
Resurfacing from £350. Every quote is fixed and free. What we look at:
- Previous DIY repairs that have to come out
- How hard the colour is to match
- Whether it’s a chip, crack, burn or wear
- Access to the area
Our prices are the same across the UK, with no extra for Wainscott. The job itself decides the price: how much damage, what it’s made of and how many items.
How to get a fixed price
Good photos mean an accurate price. Here’s what we find most useful:
- A coin beside the damage so we can judge size
- One picture of the entire bath
- A clear, close picture of the problem area
- What it’s made of, if you know
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can give you a fixed price the same day in most cases.
Our work in Wainscott
Wainscott is about 2 miles north of Rochester, in Medway. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We work in 68 places in Medway. You can also see our page for London, about 27 miles away.
Postcode districts we cover here: ME2 and ME3. Streets in the area include Hoo Road, Holly Road and Leigh Road, all of which we cover. We also cover the places around Wainscott: Upper Upnor (1 mile south-east), Lower Upnor (1 mile east), Chattenden (1 mile north-east), Cooling Street (2 miles north) and Hoo St Werburgh (2 miles north-east). Further out, we also cover Gillingham (4 miles south-east), Chatham (4 miles south), Rainham (5 miles south-east), Luton (3 miles south), Park Wood (6 miles south-east) and Lordswood (5 miles south).
Landmarks near Wainscott
We visit homes around Broomhill Park, The Hundred of Hoo Academy and St Philip & St James, among other places. Also close by are Former Ordnance Store At Chatham Gun Wharf (1.8 miles south), Royal Oak pub (0.6 miles south-west), Wainscott Primary School (less than half a mile south-east) and Temple School (0.9 miles west). The nearest railway station is Strood station, about 1.1 miles south-west of the centre. Further afield, we also cover the area around Huguenot Museum (1.6 miles south) and French Hospital (1.6 miles south). The countryside around Wainscott includes Rede Common and Gad's Hill.
- Local facilities include City of Rochester-upon-Medway (1.4 miles south-west)
FAQs for Wainscott
I rent my home. Can I book you?
Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged.
Do the materials smell?
Expect a mild smell while we are working.
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Does re-enamelling smell?
There is some smell while the coating is applied, so we ventilate the room. It clears as the finish cures.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as householders in Wainscott.
Can pets and children be at home?
Please keep children and pets out of the room during the visit. Everywhere else in the home is fine.
Can you do more than one item on the same visit?
Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.
How durable is a resurfaced bath?
A well-prepared finish lasts a long time if it’s looked after. Gentle cleaning, no suction mats.
Repair or replace in Wainscott?
A new bath means a plumber, lifting out the old bath, re-tiling or making good the walls and several days without a working bathroom. Re-enamelling gives the bath a new finish without moving it. Resurfacing from £350, with every job priced individually. A repair is priced on what needs doing, not your postcode. The full price is agreed before booking.
What you get with us
- Accredited with CHAS, Constructionline and SafeContractor
- Straight answers about what a repair can do
- A year’s guarantee on all work
- Work done at your home or business
See our pricing or guide to resurfacing and replacement costs.
Towns and villages near Wainscott
What else we do in Wainscott
When a repair is not the answer
It helps to know what we cannot do:
- Steel that has corroded right through
- Leaking taps or wastes (a plumber’s job)
- A bath split right through the body
Send us pictures and we will tell you honestly before you book.
Materials we work on in Wainscott
- Pressed steel baths
- Basins & shower trays
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
Do you need bath re-enamelling in Wainscott?
The gloss on enamel is thin, and abrasive cleaning slowly wears it away. Eventually the surface turns porous and stains.
Look out for any of the following:
- Enamel that’s lost its shine and feels rough
- Staining under the taps and around the waste
- Thin, worn enamel in places
- A roll-top that is seen better days
Before booking anyone
- What preparation is included
- Is the price fixed, and does it include VAT?
- What happens if the damage is worse than the pictures show
- Whether there are any call-out or travel charges
About our accreditations · Every repair comes with a one-year guarantee.

