Buckinghamshire · England
Bath Re-enamelling for Walter's Ash homes
Local bath re-enamelling for Walter's Ash: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- Staining under the taps and around the waste
- Enamel that’s lost its shine and feels rough
Bath re-enamelling in Walter's Ash, done in place
The bath stays where it is, so your taps, tiles and plumbing are left alone. Most baths are done in one visit, with the bath ready to use the following day. We work on cast iron baths, basins & shower trays and Victorian roll-tops, and the jobs we see most are several chips and rust patches and an original cast iron bath that needs restoring.
Your repair is guaranteed for a year, as with every job we do.
- Where
- Walter's Ash (HP14)
- County
- Buckinghamshire
- Cover
- A year, on every repair
- Quotes
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Walter's Ash and nearby
Walter's Ash is about 4 miles north-west of High Wycombe, in Buckinghamshire. From the centre of Walter's Ash to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. We cover 263 places in Buckinghamshire, from the larger towns to small villages. Our jobs stretch from Walter's Ash to London (32 miles away).
Every address in HP14 is within our area, from the main roads to the quietest streets. Local streets include Main Road, Honey Way and Bradenham Wood Lane. Nearby, we also work in Naphill (1 mile south-east), Upper North Dean (1 mile north-east), Lower North Dean (1 mile east), Speen (1 mile north) and Bryant's Bottom (1 mile north-east). Further out, we also cover Aylesbury (10 miles north), High Wycombe (4 miles south-east), Chesham (8 miles east), Marlow (7 miles south), Amersham (8 miles east) and Beaconsfield (8 miles south-east).
Local landmarks in Walter's Ash
Our clients here include homes close to Church of St Botolph, The Wheel pub and Naphill and Walters Ash School. Walter's Ash’s nearest station is Saunderton station, about 1.5 miles west. Further afield, we also cover the area around Eden (3.4 miles south-east) and Wycombe Hospital (3.7 miles south-east). For a walk, there is Prestwood Local Nature Reserve.
- Other local spots include West Wycombe Rural (2.6 miles south-west)
Landlords, agents and businesses in Walter's Ash
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
DIY kit or professional repair?
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
What your bath is made of matters
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. It must be solid and not flex underfoot for the finish to last.
Walter's Ash: your questions answered
Do you need to take the bath out?
No. We resurface it in place, so nothing else is disturbed.
When can you do it?
We will give you dates with your quote. Tell us if you need it done quickly.
What happens if you find more damage?
The price is fixed for what the photos show. If there’s more, we will tell you before starting.
Is it messy?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Someone resurfaced my bath and it’s peeling. Can you help?
Normally, yes. The old coating comes off before we resurface it. Mention it when you send photos.
Can you redo someone else’s repair?
Most of the time. Let us know what was used before and we’ll plan for it.
Is there a guarantee?
Yes, for a year. If there is a problem with the work in that time, we come back and put it right.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.
When we would advise against a repair
Honesty matters more than a booking, so here’s what a repair cannot fix:
- Leaks from fittings rather than the bath
- Acrylic that moves when you stand in it
- Damage hidden under a previous coating, until it’s stripped back
If in doubt, send pictures and we will say what we think before you book.
Materials we work on in Walter's Ash
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
- Pressed steel baths
- Basins & shower trays
What affects the price in Walter's Ash
Resurfacing from £350. We charge the same across the UK, including Walter's Ash. The price reflects:
- What kind of damage it is
- The material and finish
- How hard the colour is to match
- Whether we combine several jobs
The price reflects the work involved, not where you live. You will see the full price before booking.
Send photos for a quote
Most quotes are done from pictures alone. To help us price it:
- Natural light rather than flash
- A photo taken from further back
- The postcode, so we can plan the visit
- Something in shot to show the size
The quickest way to a price is to send a couple of photos through our quote form or ring us. We’ll tell you honestly whether it can be repaired.
Looking after it afterwards
Much of the damage we repair could have been avoided. A few tips:
- Get any chip repaired quickly
- Keep suction mats out of the bath
- Wipe the bath dry after use in hard water areas
- Repair dripping taps early
Stick to mild, non-abrasive cleaners, avoid suction bath mats, and do not leave bottles or razors standing on the surface.
Don’t try to scrub a worn bath back to shine. It removes more of the surface.
Places near Walter's Ash
Also in Walter's Ash
What we do, step by step
We agree an arrival time beforehand. On site, it takes a full day in most cases. We leave the room clean and you will know when it can be used.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures.
Getting ready for the visit
- Keep children and pets away from the room on the day
- Let us know about parking or access
- Move bottles, mats and clutter away from the area
Ask for a price
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, include your postcode and send them over. You will get a fixed quote, not an estimate.
Advice
When to call us in Walter's Ash
Older baths often have several problems at once: dull areas, chips, rust and staining. Re-enamelling deals with all of them in one go.
Send us a picture if you notice any of these:
- Stains that will not shift
- Wear marks under the taps
- A coating lifting around the plughole
- A bath in a colour that no longer suits
Questions to ask before you book
- A fixed quote, and whether VAT is included
- What prep work is covered
- Who turns up on the day
- Whether there are any call-out or travel charges
About our accreditations · Every repair comes with a one-year guarantee.
