Herefordshire · England
Bath Re-enamelling for Clodock homes
Full bath re-enamelling and resurfacing at your home in Clodock, with a one-year guarantee on every repair.
- Resurfacing from £350
- Several chips and rust patches
- An original cast iron bath that needs restoring
Common questions in Clodock
Can you quote from pictures?
Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.
Is repairing better than replacing?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. We’ll be honest if it’s not worth it.
What information do you need?
Use the quote form or ring 0345 017 0787, and we will take it from there.
Are you a vetted contractor?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
What happens after I send pictures?
We look at the pictures and reply with a fixed price and some dates. If we need another angle, we will ask.
Does re-enamelling smell?
There is some smell while the coating is applied, so we ventilate the room. It clears as the finish cures.
Can pets and children be at home?
Just keep them out of the work area. We’ll let you know when it’s safe to use again.
Do you come to Clodock?
Yes. We work across the UK and come to Clodock. Send photos and we will quote, or call 0345 017 0787.
Bath re-enamelling at your home in Clodock
Resurfacing renews the whole surface of the bath without taking anything out. It suits baths that are dull, stained, rough or chipped all over. Whether it’s a coating lifting around the plughole and worn patches where water runs and sits, we can help, on acrylic baths, cast iron baths and Victorian roll-tops alike.
The work is covered for a year after we finish. Just call us if there’s a problem and we’ll sort it.
- Where
- Clodock (HR2)
- Region
- Herefordshire
- Cover
- A year, on every repair
- Quote
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Towns and villages near Clodock
Other services in Clodock
How it works
Your technician turns up at the time we agreed with you and checks the damage against your pictures first. The floor and nearby surfaces are covered before any work starts. The work itself takes the best part of a day, and we leave the room as we found it.
- First we protect the bathroom and set up ventilation.
- We clean and degrease the bath and repair any chips or rust.
- We prepare the surface and apply a bonding primer.
- We spray several coats of new enamel finish.
- We leave it to cure, and it’s usually ready the next day.
Preparing for the visit
- Let us know which floor the room is on
- Tell us about parking, stairs or access
- Tell us about any previous repairs or coatings
Ask for a price
You do not need a survey visit. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we will reply with a fixed price.
Advice
Landlord and trade work in Clodock
We work for landlords, letting agents and housing providers in Clodock as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
If you manage property in Clodock, we can repair and quote for several addresses together. Send pictures for each one and we’ll price them together.
Materials and what they mean for the repair
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we check it carefully.
Keeping it looking good
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Avoid suction-cup mats
- Get any chip repaired quickly
- Wash away dyes and oils after use
- Leave the bath for the full curing time before using it
Stick to mild, non-abrasive cleaners, don’t use suction bath mats, and do not leave bottles or razors standing on the surface.
If a previous coating is starting to peel, don’t pick at it. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
Prices and what affects them
Prices start from £350. There’s no charge for travel to Clodock. The price comes down to:
- Where the damage is and how we get to it
- How hard the colour is to match
- The type of damage
- The material and finish
There are no surprise extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
How to get a fixed price
Phone pictures are fine. Just make sure we can see:
- A coin or ruler next to the damage for scale
- A close-up of the damage, in focus
- Natural light rather than flash
- What it’s made of, if you know
Pricing is simple: take a close-up of the damage and a picture from further back, send them over with your postcode, and you will get a fixed quote back. There is no charge for the quote and no obligation.
Repairing versus replacing in Clodock
If the bath is sound, re-enamelling is usually much cheaper than replacing it, when you count removal, plumbing, tiling and decorating. It’s also far quicker. Resurfacing from £350, with every job priced individually. Set against the cost of replacement, a repair is typically a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.
Why us?
- Nothing taken out or refitted
- Rooms protected and left tidy
- Straight answers about what a repair can do
- One price list for the whole UK
Take a look at our full price list or guide to resurfacing and replacement costs.
Do you need bath re-enamelling in Clodock?
Hard water speeds up the wear, and abrasive cleaners do the most damage.
These are the problems we’re asked about most:
- Wear marks under the taps
- A bath in a colour that no longer suits
- A bath that stays dull however much you clean it
- Several chips and rust patches
Comparing quotes
- The length of the guarantee and what it covers
- What happens if they find more damage
- Whether the price is fixed and includes VAT
- How the room is protected while they work
Honest limits
Some problems need a builder, plumber or fitter rather than us:
- Plumbing leaks, which need a plumber
- Holes rusted through the metal
- Problems we cannot see until an old finish comes off
Not sure? Send photos and we will give you a straight answer before booking.
What we work on
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
Clodock and the surrounding area
Clodock is about 8 miles north of Abergavenny, in Herefordshire. We agree a date that works for you, and you’ll know when to expect us, so you’re not left waiting in all day. Clodock is one of 255 places in Herefordshire we cover. We work right across the region, from Clodock to Birmingham (about 59 miles away).
Postcode districts we cover here: HR2. Neighbouring places we cover include Longtown (1 mile north), Walterstone Common (2 miles south-east), Lower Maes-coed (2 miles north-east), Rowlestone (4 miles east) and Abbey Dore (4 miles north-east). We also work in nearby towns such as Hereford (14 miles north-east), Redhill (13 miles north-east), Newton Farm (13 miles north-east), Whitecross (13 miles north-east), Eign Hill (14 miles north-east) and Widemarsh (14 miles north-east).
Around Clodock
Our customers here include homes close to Cornewall Arms, Longtown Community Primary School and Church of St Clodock, among other places. Other landmarks nearby include Longtown Castle (1.1 miles north). For a walk, there is The Parks and Hatterrall Hill.
About our accreditations · Every repair comes with a one-year guarantee.
