Leicestershire · England
Bath re-enamelling & resurfacing in Walton, Leicestershire
We travel to Walton for full bath re-enamelling and resurfacing. Everything is done in place, with a one-year guarantee.
- Resurfacing from £350
- An outdated colour you’d like to change
- An old resurfacing that is failing
About our bath re-enamelling in Walton
The bath stays where it is, so your taps, tiles and plumbing are left alone. It generally takes one visit, with the bath ready to use the following day. Whether it’s an original cast iron bath that needs restoring and brown or grey marks that don’t clean off, we can typically put it right.
Whatever the size of the job, you get the same one-year guarantee.
- Location
- Walton (LE17)
- Area hub
- Leicestershire
- Warranty
- One year on every repair
- Quotes
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Walton questions
Is there a guarantee?
Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.
Are there extra charges for Walton?
There’s no separate call-out charge. The fixed price covers the visit and the work.
What information do you need?
Photos of the damage, a photo of the entire bath and your postcode. After that, we just agree a date.
How long does re-enamelling last?
That depends on preparation and how the bath is treated. With good preparation and gentle cleaning it lasts a long time, and it’s guaranteed for a year.
Is it messy?
Dust sheets and masking go down before we start, and we clean up when we’ve finished.
Will the bath be moved?
Not at all. We work on the bath in place, with the room masked and ventilated.
Will there be fumes?
Some odour is normal while we spray, so we ventilate the room. It fades as the coating cures.
Can you make a coloured bath white?
Yes. We can resurface a coloured bath in white, and we can do the rest of the suite as well.
Places near Walton
What else we do in Walton
Looking after it afterwards
How the surface is treated afterwards matters:
- Wipe the bath dry after use in hard water areas
- Store bottles off the bath
- A dripping tap should be fixed promptly
- Do not use the bath until it has fully cured
Rinse the bath and wipe it over after use, especially in hard water areas, so limescale cannot build up.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
Signs you need bath re-enamelling in Walton
Enamel’s shine is only skin deep, and abrasive cleaning slowly wears it away. Eventually the surface turns porous and stains.
Most people contact us after spotting something like this:
- Thin, worn enamel in places
- Lots of chips and rust spots
- A roll-top that is seen better days
- An outdated colour you’d like to change
Questions to ask before booking
- Whether the colour is mixed to match
- Aftercare advice
- The length of the guarantee and what it covers
- What happens if they find more damage
Different materials, different repairs
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Acrylic
Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Walton and the surrounding area
Walton is about 7 miles south of Wigston, in Leicestershire. Our repair technicians come to customers in Walton and nearby villages, so nothing has to leave your home. Our repair technicians cover all 287 towns and villages across Leicestershire. You can also see our page for Birmingham, about 32 miles away.
Postcode districts we cover here: LE17. We regularly work on streets such as High Street, The Cross and Midway Lane and the roads around them. Nearby, we also work in Kimcote (1 mile south-west), Upper Bruntingthorpe (1 mile north-east), Gilmorton (2 miles west), Walcote (3 miles south-west) and South Kilworth (3 miles south). Larger places within reach include Hinckley (11 miles west), Wigston (7 miles north), Syston (15 miles north), Lutterworth (4 miles west), Blaby (6 miles north) and Broughton Astley (5 miles north-west).
Near you in Walton
Locally, our jobs take us to homes close to Church of All Saints. Further afield, we also cover the area around Lutterworth and District Museum (3.5 miles south-west).
What a repair cannot fix
Not everything can be repaired, and we’d rather say so up front. We cannot fix:
- An acrylic bath that flexes badly underfoot
- A bath that is rusted through
- Anything hidden under an old coating, until we remove it
Send us pictures and we’ll tell you honestly.
Materials we repair
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
- Pressed steel baths
For landlords and businesses
Letting agents often send us photos straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.
How we price bath re-enamelling
Prices start from £350. We price every job individually. What matters most is:
- How easy the damage is to reach
- The colour and finish to match
- The material and finish
- What kind of damage it is
Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
Send pictures for a quote
When you take your pictures, a few simple things make all the difference:
- Any details about the material
- Whether it’s been repaired or coated before
- Good light, ideally daylight, without flash glare
- A clear, close picture of the problem area
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed quote.
What we do, step by step
The work is clean and fairly quiet, so you can carry on at home. Protection goes down first, then the work takes a full day. Before we leave, we explain the curing time and the aftercare.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Preparing for the visit
- Avoid using the area for a few hours before we arrive
- Have somewhere for us to park nearby if possible
- Mention if the room is upstairs or in a flat
Get a quote
To get a price, send two or three pictures through our quote form or ring us. We’ll say immediately whether it can be repaired.
Related advice
Can I fix it myself?
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it doesn’t stop a professional repair. Just mention it when you send photos, as it can add time.
If you do try a kit, read the instructions carefully, and don’t use it until it has fully cured. If it fails, we can still put it right.
About our accreditations · Every repair comes with a one-year guarantee.
