Derbyshire · England
Bath re-enamelling & resurfacing in Walton-on-Trent, Derbyshire
Bath re-enamelling in Walton-on-Trent without the cost of replacing. Send us pictures for a fixed quote, then we come to you.
- Resurfacing from £350
- A peeling or bubbling previous coating
- An outdated colour you’d like to change
How we handle bath re-enamelling in Walton-on-Trent
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. Several coats of finish go on over a bonding primer, once the bath has been cleaned, repaired and prepared. If you’re dealing with a dull, rough surface that won’t come clean and a bath in a colour that no longer suits, we can help.
We stand behind the work with a one-year guarantee, so you’re not left on your own once we have gone.
- Where
- Walton-on-Trent (DE12)
- County
- Derbyshire
- Guarantee
- One year on every repair
- Price
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Different materials, different repairs
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Repair or replace: which is better?
If the bath is sound, re-enamelling is generally much cheaper than replacing it, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s much quicker too. Our bath re-enamelling starts from £350. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you’ll get a fixed figure.
Why book with us
- Work done at your home or business
- Fixed prices from your photos
- Same prices wherever you are
- A year’s guarantee on all work
Take a look at our pricing and guide to resurfacing and replacement costs.
When to call us in Walton-on-Trent
Many baths we resurface have simply been well used, and only the surface is worn. Underneath, a cast iron or steel bath is normally as strong as ever.
People usually call us when they notice something like this:
- A coating lifting around the plughole
- Several chips and rust patches
- A bath that stays dull however much you clean it
- Worn patches where water runs and sits
What to look for in a quote
- How your room will be protected
- What aftercare is recommended
- What happens if they find more damage
- How the colour is matched
What we can’t put right
Honesty matters more than a booking, so here’s what a repair won’t do:
- Leaking taps or wastes (a plumber’s job)
- Acrylic that moves when you stand in it
- A bath split right through the body
Send us pictures and we will tell you honestly.
Surfaces we repair
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
- Cast iron baths
About Walton-on-Trent
Walton-on-Trent is about 3 miles south-west of Burton upon Trent, in Derbyshire. We work in every kind of home, old or new, large or small, plus businesses and rented homes. We work in 532 places across Derbyshire. Our jobs stretch from Walton-on-Trent to Birmingham (22 miles away).
All of DE12 is within our area, from the main roads to the quietest streets. You’ll find streets such as Main Street, Bells End Road and The Ropewalk, all of which we cover. We also cover the places around Walton-on-Trent: Barton Turn (1 mile west), Rosliston (2 miles south-east), Branston (2 miles north), Caldwell (2 miles east) and Tatenhill (2 miles north-west). Larger places within reach include Swadlincote (5 miles east), Woodville (6 miles east), Upper Midway (5 miles east), Hilton (8 miles north), Midway (6 miles east) and Lower Midway (6 miles east).
Local landmarks in Walton-on-Trent
Locally, our jobs take us to homes close to Walton On Trent CofE Primary and Nursery School, John Taylor High School and St Lawrence's Church, among other places. The closest station to Walton-on-Trent is Burton-On-Trent station, roughly 3.4 miles north-east of the centre. Further afield, we also cover the area around Barton Under Needwood Cottage Hospital (2 miles west) and Cooper's Square (3.4 miles north-east). Not far away are Brankley Pastures.
Common questions in Walton-on-Trent
Is there a smell?
Yes, while we’re applying the finish. We set up ventilation and the smell fades as it cures.
How quickly can you book me in?
Your quote comes with available dates. If it’s urgent, say so and we will do what we can.
Is the work guaranteed?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Can you repair something that is been repaired before?
Normally, yes. The old repair comes out first.
Is it worth repairing rather than replacing?
Usually, if the item is otherwise sound. A repair avoids removal and making good. We’ll tell you honestly if replacement makes more sense.
What do you need from me?
Photos of the damage, a photo of the entire bath and your postcode. After that, we just agree a date.
Do you hold any accreditations?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Do you cover the whole of Derbyshire?
Across the UK, so Walton-on-Trent is covered. Prices do not change with location.
For landlords and businesses
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
The process
We begin by going over the job with you. Then the area is sheeted and masked and the work begins. Allow most of the day, and we will keep you posted as we go.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Before we arrive
- Tell us about any previous repairs or coatings
- Tell us if there are stairs or a lift
- Let the surface dry out before the visit
How to get a price
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.
Related advice
Towns and villages near Walton-on-Trent
Other services in Walton-on-Trent
Should I try a DIY kit first?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and do not use it until it has fully cured. If it fails, we can still put it right.
How we price bath re-enamelling
Prices start from £350. Each job gets its own fixed quote. This is what makes a difference:
- How hard the colour is to match
- What the surface is made of
- Doing more than one item at once
- What kind of damage it is
The price depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. We give a fixed quote from your pictures, so there are no surprises on the day.
How to get a fixed price
Good pictures mean an accurate price. Here’s what helps:
- Natural light rather than flash
- Any earlier repairs or coatings
- A clear, close picture of the problem area
- The material, if you know it
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed quote.
About our accreditations · Every repair comes with a one-year guarantee.
