Staffordshire · England
Bath re-enamelling & resurfacing in Branston, Staffordshire
Full bath re-enamelling and resurfacing for homes and businesses in Branston and across Staffordshire. Send photos for a free, fixed quote.
- Resurfacing from £350
- A peeling or bubbling previous coating
- A bath that stays dull however much you clean it
How we handle bath re-enamelling in Branston
If your bath is sound but looks tired, resurfacing is normally the best value. There is no removal, plumbing or tiling involved. Our technicians work on pressed steel baths, Victorian roll-tops and cast iron baths, and the jobs we see most are a period or roll-top bath worth keeping and a peeling or bubbling previous coating.
Whatever the size of the job, it’s backed by a one-year guarantee.
- Area
- Branston (DE14)
- County
- Staffordshire
- Guarantee
- 12 months on all our work
- Price
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
DIY kit or professional repair?
If you do try a kit, read the instructions carefully, and do not use it until it has fully cured. If it fails, we can still put it right.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
Questions from Branston
Can pets and children be at home?
Just keep them out of the work area. We’ll let you know when it’s safe to use again.
Does re-enamelling smell?
There is some smell while the coating is applied, so we ventilate the room. It clears as the finish cures.
Will it make a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
Do you cover Branston?
We do. We send a technician to Branston for every job, and the price is the same as everywhere else.
When can you do it?
Your quote comes with available dates. Tell us if you need it done quickly.
Does someone need to be in?
Someone needs to let us in and show us the job. You don’t need to watch us work.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
What happens after I send photos?
We check the damage, the material and your postcode, then reply with a quote with dates.
Signs you need bath re-enamelling in Branston
Once enamel loses its gloss, it stains more easily, and cleaning harder only makes it worse. That’s the point where re-enamelling makes sense.
Most people contact us when they notice something like this:
- A bath that stays dull however much you clean it
- Brown or grey marks that don’t clean off
- A roll-top that is seen better days
- Several chips and rust patches
What your quote should include
- What prep work is covered
- How changes to the job are handled
- How the room is protected while they work
- If travel is included in the price
Nearby places to Branston
What else we do in Branston
Why repair rather than replace?
Replacing a cast iron bath is a big job: they’re heavy, frequently need breaking up, and a new one isn’t cheap. Resurfacing in place avoids that entirely. Prices start from £350. There are no surprise extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Why us?
- Colour-matched on site
- Nothing taken out or refitted
- CHAS and Constructionline accredited
- One price list for the whole UK
Take a look at our prices page or guide to resurfacing and replacement costs.
What a repair cannot fix
A few problems are outside what a surface repair can do:
- Leaks from fittings rather than the bath
- An acrylic bath that flexes badly underfoot
- Steel that has corroded right through
Not sure? Send pictures and we will give you a straight answer before booking.
Materials we work on in Branston
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
- Cast iron baths
- Victorian roll-tops
About Branston
Branston is about 1 mile south-west of Burton upon Trent, in Staffordshire. Whether you are in the middle of Branston or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. We work in 512 places in Staffordshire, from the larger towns to small villages. We work right across the region, from Branston to Birmingham (24 miles away).
Here we cover the DE14 postcode area. Streets in the area include Old Road, Warren Lane and Clay's Lane. We also cover the places around Branston: Anglesey (1 mile north-east), Stapenhill (2 miles east), Tatenhill (2 miles west), Walton-on-Trent (2 miles south) and Barton Turn (2 miles south-west). Further out, we also cover Tamworth (11 miles south), Lichfield (10 miles south-west), Rugeley (12 miles west), Burntwood (13 miles south-west), Hednesford (15 miles west) and Uttoxeter (12 miles north-west).
Landmarks near Branston
Our customers here include homes close to Paget High School, Rykneld Primary School and Stapenhill Gardens. The closest station to Branston is Burton-On-Trent station, roughly 1.5 miles north-east. A little further out are Burton Museum (1.6 miles north-east) and Burton upon Trent Infirmary (1.4 miles north-east). Open spaces near Branston include Brankley Pastures.
How to care for the repair
How the surface is treated afterwards matters:
- Do not let dyes or oils sit on the finish
- Keep suction mats out of the bath
- Don’t leave bottles, razors or sponges standing on the surface
- Repair dripping taps early
Wipe the bath dry after use where you can, particularly with hard water, and rinse away any product left on the surface.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further and makes resurfacing more work.
What happens on the day
On the day itself, there is little for you to do. Show us the job, point us to the room, and we’ll take it from there. The job generally runs to most of the day.
- We mask and protect the room and ventilate it.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- We spray several coats of new enamel finish.
- The bath is left to cure and can typically be used the next day.
How to prepare
- Let us know about parking or access
- Mention any earlier repairs or resurfacing
- Point us to the nearest place to park
How to get a price
For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.
Advice
Landlord and trade work in Branston
We are used to working with agents and managing companies. Just send photos, the address and how to get access and we will handle the rest.
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
Repairs by material
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Steel often rusts by the plughole, so we pay close attention there.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
About our accreditations · Every repair comes with a one-year guarantee.
