Warrington · England
Bath Re-enamelling for Warburton homes
Fixed-price bath re-enamelling in Warburton and the surrounding area, done in a single visit in most cases and guaranteed for a year.
- Resurfacing from £350
- Wear marks under the taps
- Brown or grey marks that do not clean off
About our bath re-enamelling in Warburton
Re-enamelling gives a worn bath a new glossy surface without a refit. It suits baths that are dull, stained, rough or chipped all over. We work on cast iron baths, Victorian roll-tops and acrylic baths, and the jobs we see most are chips and rust in more than one place and enamel that’s lost its shine and feels rough.
You’re covered for a year from the day of the repair. If anything isn’t right, ring us and we’ll come back.
- Location
- Warburton (WA13)
- Region
- Warrington
- Warranty
- A year, on every repair
- Quote
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Keeping it looking good
Nothing complicated is needed, just a few sensible habits:
- Leave the bath for the full curing time before using it
- A quick wipe after use keeps limescale away
- Never use suction bath mats
- Have chips seen to early
The first few days matter most: let it cure fully, then use mild cleaners only. After that, no abrasives and no suction mats.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
Landlords, agents and businesses in Warburton
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
If you manage property in Warburton, we can repair and quote for several addresses together. Just send pictures for each address and we’ll come back with a combined price.
What happens on the day
We turn up when we said we would, introduces themselves and looks over the damage before anything else. Dust sheets and masking tape go down before we open a single tin. The work itself takes most of the day, and we leave the room as we found it.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Before we arrive
- Make sure the area is dry
- Have a window or extractor fan available
- Point us to the nearest place to park
Get a quote
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, add your postcode and send them to us. What comes back is a fixed quote, not a guess.
Read more
About Warburton
Warburton is about 3 miles south-west of Irlam, in Warrington. Across the WA13 area, we come to you. Warburton is one of 72 towns and villages in Warrington where we work. We work right across the region, from Warburton to Manchester (about 11 miles away).
Here we cover the WA13 postcode area. Streets in the area include Park Road, Bridge Road and Wigsey Lane, and we cover them all. Nearby, we also work in Mossbrow (1 mile east), Lane End (1 mile north-west), Hollins Green (1 mile north-west), Hollinfare (1 mile north) and Partington (1 mile north-east). Further out, we also cover Warrington (5 miles west), Golborne (7 miles north-west), Fearnhead (4 miles west), Wilderspool (6 miles west), Lowton (7 miles north-west) and Orford (5 miles west).
Around Warburton
Typical jobs here are in homes near Broadoak School, Old Church of Saint Werburg and Rixton Clay Pits and the streets around them. Nearby too are St Helen's Church of England Primary School (0.9 miles north) and Ye Olde Red Lion Pub (0.8 miles north). The closest station to Warburton is Glazebrook station, about 1.8 miles north. A little further out are Altrincham General Hospital (4.3 miles east) and Lymm Heritage Centre (1.8 miles south-west). Not far away are Rixton Clay Pits.
Repairing versus replacing in Warburton
Getting a cast iron bath out is hard work: it’s very heavy, may need breaking up, and the replacement can be costly. Re-enamelling avoids all of it. Resurfacing from £350, with every job priced individually. Compared with replacing, repairing usually costs far less, because there is no removal, plumbing or making good. The quote lists exactly what you’re paying for.
Why book with us
- We’ll tell you if it’s not worth repairing
- Usually one visit, start to finish
- Work done at your home or business
- Rooms protected and left tidy
Take a look at our full price list or bath cost comparison.
Questions from Warburton
Can you make a coloured bath white?
Yes. We can resurface a coloured bath in white, and we can do the rest of the suite as well.
Which areas do you work in?
Everywhere in the UK, Warburton included. There is no extra charge for travel.
Do I have to be there?
We need someone to let us in. After that, you can carry on with your day.
Do you charge for travel?
No. Our quotes include travel, and we charge the same wherever you are.
Can tenants book a repair?
Yes. Ask your landlord first, and we can send them the quote if that helps.
What happens once I’ve sent pictures?
We come back with a fixed quote, plus dates. There’s no obligation to book.
How durable is a resurfaced bath?
That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.
Do you cover Warburton?
Yes. We work across the UK and travel to Warburton and the rest of Warrington. Send us pictures for a fixed quote, or call 0345 017 0787.
DIY repairs versus a professional job
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
When a repair is not the answer
Before booking, it’s worth knowing the limits:
- An acrylic bath that flexes badly underfoot
- A bath that’s rusted through
- Leaks from fittings rather than the bath
Not sure? Send pictures and we’ll give you a straight answer before booking.
Materials we repair
- Pressed steel baths
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
What bath re-enamelling costs
Prices start from £350. We charge the same across the UK, including Warburton. What changes the price is:
- Whether we combine several jobs
- What the surface is made of
- How much damage there is
- Any earlier repairs that need removing first
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you’ll get a fixed figure.
Quotes from your pictures
A couple of clear pictures is all it takes. It helps if you send:
- Your postcode, so we can check dates
- A picture taken from further back
- One sharp close-up of the damage
- Any earlier repairs or coatings
For a price in Warburton, photos are the quickest way: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
Also near Warburton
What else we do in Warburton
Materials and what they mean for the repair
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
About our accreditations · Every repair comes with a one-year guarantee.
