Lincolnshire · England
Bath Re-enamelling in Wargate
Our repair technicians come to Wargate for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.
- Resurfacing from £350
- A period or roll-top bath worth keeping
- A bath that stays dull however much you clean it
How we handle bath re-enamelling in Wargate
After re-enamelling, the bath has a smooth, glossy, new-looking surface, but without the cost and upheaval of a refit. It’s ideal if you like your bathroom but not the state of the bath. We work on pressed steel baths, Victorian roll-tops and cast iron baths, and the jobs we see most are a coating lifting around the plughole and worn patches where water runs and sits.
All our work comes with our one-year guarantee.
- Where
- Wargate (PE11)
- Area hub
- Lincolnshire
- Cover
- 12 months on all our work
- Price
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
What affects the price in Wargate
Prices start from £350. There are no hourly rates or hidden extras. The price depends on:
- What kind of damage it is
- Where the damage is and how we get to it
- Any earlier repairs that need removing first
- Unusual colours or finishes
A repair typically costs much less than people expect, particularly next to the cost of replacement. Send photos and we’ll give you the exact figure.
Getting a price from pictures
Good pictures mean an accurate price. Here’s what we find most useful:
- Any earlier repairs or coatings
- One sharp close-up of the damage
- A picture taken from further back
- Your postcode, so we can check dates
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can price the job.
When to call us in Wargate
Enamel does not fail overnight. Years of cleaning, hard water and hot baths dull the surface, starting where water runs and sits.
If you can see any of these, send us a photo:
- Thin, worn enamel in places
- An outdated colour you’d like to change
- A coating lifting around the plughole
- Staining under the taps and around the waste
What to look for in a quote
- What protection goes down before work starts
- When it can be used again
- The length of the guarantee and what it covers
- Whether the price is fixed and includes VAT
How to look after the repair
It’s all simple stuff:
- Wipe the bath dry after use in hard water areas
- Keep toiletries on a shelf rather than in the bath
- Keep suction mats out of the bath
- Do not leave a chip unrepaired
Rinse the bath and wipe it over after use, especially in hard water areas, so limescale can’t build up.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
Other services in Wargate
FAQs for Wargate
What happens once I’ve sent pictures?
We review the pictures and send a fixed quote.
I’m a tenant. Can you help?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
Do you need to take the bath out?
No. It’s re-enamelled where it stands, so nothing else is disturbed.
Will there be fumes?
A little, during the work. We set up ventilation and the smell fades as it cures.
How long does re-enamelling take?
Generally a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
Is a repair better than a new one?
Typically, if the item is otherwise sound. A repair avoids removal and making good. If replacing would be better, we will say so.
Can you resurface a pink bath in white?
Yes, most people go for white. Tell us what you’d like when you ask for a quote.
Will you leave a mess?
No. The work area is masked and covered, and we take our waste away with us.
Our work in Wargate
Wargate is about 5 miles north of Spalding, in Lincolnshire. Anywhere in PE11, we come to you. We work in all 732 towns and villages in Lincolnshire, from the larger towns to small villages. We work right across the region, from Wargate to Birmingham (about 77 miles away).
Our technicians cover all of PE11 and the streets around it. Streets in the area include Wargate Field Lane, Sweetlands Way and Belchmire Lane. If you’re just outside Wargate, we cover Gosberton (1 mile north), Belnie (1 mile east), Westhorpe (1 mile north-west), Gosberton Cheal (1 mile south-west) and Surfleet (2 miles south-east). Within a short drive, we also cover Boston (10 miles north-east), Spalding (5 miles south), Sleaford (14 miles north-west), Bourne (11 miles south-west), Holbeach (8 miles south-east) and Austerby (11 miles south-west).
Local landmarks in Wargate
Typical jobs here are in homes near Church of St Peter and St Paul, The Bell pub and Gosberton Academy and the streets around them. For rail, the closest station is Spalding station, about 4.8 miles south of the centre. Further afield, we also cover the area around The Spalding Bulb Museum (2.4 miles south).
What your bath is made of matters
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Repair or replace: which is better?
Replacing the bath means a plumber, lifting out the old bath, making good the walls and tiles and several days without a working bathroom. Re-enamelling gives the bath a new finish without moving it. Resurfacing from £350, with every job priced individually. The price depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. You get a fixed quote from your photos, so there are no surprises on the day.
Why Wargate clients choose us
- One visit for most repairs
- Colour mixed on the day to match
- Straight answers about what a repair can do
- Everything repaired in place
Take a look at our prices page or bath cost comparison.
What happens on the day
Nothing needs to be moved out of the room. We bring everything we need with us, put protection down and get going once we’ve agreed what we are doing. Most jobs take a full day, and you’re welcome to carry on with your day while we work.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the next day.
Preparing for the visit
- Tell us about parking, stairs or access
- Keep a parking space free if you can
- Let us know which floor the room is on
How to get a price
If you’re in Wargate and want a price, photos are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Advice
Landlord and trade work in Wargate
Hospitality businesses can’t afford rooms out of action for long, so we keep visits short and tidy. We’ll fit around changeovers where we can.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We’re CHAS, Constructionline and SafeContractor accredited.
When we’d advise against a repair
We will not take on work that will not last, so here’s what a repair cannot put right:
- A bath split right through the body
- Holes rusted through the metal
- Anything hidden under an old coating, until we remove it
If in doubt, send pictures and we will say what we think.
Surfaces we repair
- Cast iron baths
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
About our accreditations · Every repair comes with a one-year guarantee.
