Lincolnshire · England
Bath Re-enamelling for Surfleet homes
Bath re-enamelling in and around Surfleet: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- Brown or grey marks that do not clean off
- A roll-top that is seen better days
FAQs for Surfleet
How long is the bath unusable?
Usually a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
Is it worth repairing rather than replacing?
Normally, if the item is otherwise sound. A repair avoids removal and making good. We’ll tell you honestly if replacement makes more sense.
Can you do the outside of a roll-top?
Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.
Will the bath be moved?
No, it stays where it is. Everything is done in your bathroom, with the room protected and ventilated.
Do I need to be at home?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Can pets and children be at home?
Yes, as long as they stay out of the room we’re working in. We’ll tell you when the room can be used again.
Can I add another job to the visit?
Of course, and it typically saves money. Send pictures of everything together and we’ll quote them together.
Will it make a mess?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Bath re-enamelling at your home in Surfleet
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. If you’re dealing with stains that won’t shift and wear marks under the taps, we can help.
We stand behind the work with a one-year guarantee, so you’re covered after the visit.
- Area
- Surfleet (PE11)
- Area hub
- Lincolnshire
- Warranty
- One year on every repair
- Quote
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Where we work around Surfleet
Surfleet is about 3 miles north of Spalding, in Lincolnshire. Wherever you are in the PE11 postcode area, a technician comes to you. Our repair technicians cover 732 places in Lincolnshire. You can also see our page for Birmingham, about 78 miles away.
Jobs in PE11 work the same way as everywhere else we cover. Jobs here include addresses on Station Road, Dobney Street and Anchor Avenue. If you are just outside Surfleet, we cover Surfleet Seas End (1 mile north-east), Crossgate (1 mile south-west), Wykeham (2 miles south-east), Pinchbeck (2 miles south-west) and Belnie (2 miles north). Further out, we also cover Boston (11 miles north-east), Spalding (3 miles south), Bourne (11 miles south-west), Holbeach (7 miles east), Austerby (11 miles south-west) and Market Deeping (13 miles south-west).
Around Surfleet
Locally, our jobs take us to homes close to Surfleet Primary School and Church of St Lawrence and the streets around them. Surfleet’s nearest station is Spalding station, roughly 3.3 miles south. A little further out are The Spalding Bulb Museum (1 mile south-west).
Should I try a DIY kit first?
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it doesn’t stop a professional repair. Just mention it when you send pictures, as it can add time.
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
Materials and what they mean for the repair
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. It must be solid and not flex underfoot for the finish to last.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s the part we put right.
Work for landlords and builders
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
Housing associations and facilities teams use us for planned and reactive repairs in Lincolnshire and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
The process
Expect a friendly, tidy visit. We agree the arrival time in advance, cover and mask the work area, then carry out the work, which normally takes a full day. If we find something your photos didn’t show, we’ll explain it before carrying on.
- We mask and protect the room and ventilate it.
- We clean and degrease the bath and repair any chips or rust.
- We key the surface and put on a bonding primer.
- Several coats of new finish are sprayed on.
- The bath is left to cure and can normally be used the following day.
How to prepare
- Let us know which floor the room is on
- Avoid using the area for a few hours before we arrive
- Clear toiletries, mats and anything else from around the area
Ask for a price
There’s no need for us to visit first. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed quote.
Related advice
How we price bath re-enamelling
Prices start from £350. We give every job a fixed price from pictures. These are the things that affect it:
- Whether we combine several jobs
- The size and number of damaged areas
- The material and finish
- Where the damage is and how we get to it
The price reflects the work involved, not where you live. You will see the full price before booking, with nothing added on the day.
Quotes from your pictures
When you take your photos, a few simple things make all the difference:
- What it’s made of, if you know
- Good light, ideally daylight, without flash glare
- Whether it’s been repaired or coated before
- Where you are, by postcode
Upload a photo of the damage and a wider shot of the whole item, and tell us you are in Surfleet, and we will come back with a fixed quote.
Looking after it afterwards
Once the work has cured, treat it gently:
- Keep toiletries on a shelf rather than in the bath
- Fix dripping taps quickly
- Don’t let dyes or oils sit on the finish
- Do not use the bath until it has fully cured
Avoid hair dye, bath bombs and oils sitting on the surface, because they can mark the finish. Fix dripping taps quickly.
Rust spots on a worn bath get worse with time. Resurfacing before they spread keeps it simpler.
More services for Surfleet
Signs you need bath re-enamelling in Surfleet
Enamel’s shine is only skin deep, and every scrub with an abrasive cleaner takes a little away. After years of use, the surface becomes porous and stains easily.
Get in touch if you’ve noticed:
- An old resurfacing that’s failing
- A coloured bath you want in white
- Stains that will not shift
- A roll-top that’s seen better days
Before you book anyone
- What prep work is covered
- If travel is included in the price
- Who turns up on the day
- Aftercare advice
Repair or replace in Surfleet?
Replacing a bath can take several days across several trades. Resurfacing takes one technician and typically a day, with the bath back in use the next day. Our bath re-enamelling starts from £350. No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
What you get with us
- Honest advice, even when it means no job
- Colour mixed on the day to match
- One price list for the entire UK
- We leave the room as we found it
See our full price list or resurfacing vs replacement cost guide.
About our accreditations · Every repair comes with a one-year guarantee.
