Lincolnshire · England
Bath re-enamelling & resurfacing in Belnie, Lincolnshire
Full bath re-enamelling and resurfacing for householders, landlords and businesses in Belnie. Send photos for a free, fixed quote.
- Resurfacing from £350
- Enamel that is lost its shine and feels rough
- Stains that will not shift
About our bath re-enamelling in Belnie
When a bath is structurally fine but worn out on the surface, resurfacing is normally the best value. It avoids removal, plumbing and re-tiling. Whether it’s brown or grey marks that don’t clean off and a peeling or bubbling previous coating, we can help, on cast iron baths, basins & shower trays and acrylic baths alike.
Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before booking.
- Area
- Belnie (PE11)
- Area hub
- Lincolnshire
- Warranty
- One year on every repair
- Quote
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Should you replace it?
When the bathroom is fine apart from the bath’s finish, re-enamelling is the least disruptive fix. Tiles, panels and taps stay put. Our bath re-enamelling starts from £350. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send photos and we’ll give you the exact figure.
What you get with us
- One-year guarantee on every repair
- Nothing taken out or refitted
- Rooms protected and left tidy
- Most jobs done in one visit
Read our prices page or resurfacing vs replacement cost guide.
When we would advise against a repair
Some jobs aren’t right for a repair, for example:
- Holes rusted through the metal
- Leaking taps or wastes (a plumber’s job)
- Anything hidden under an old coating, until we remove it
If in doubt, send pictures and we’ll say what we think before you book.
Surfaces we repair
- Victorian roll-tops
- Cast iron baths
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
Should I try a DIY kit first?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and do not use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
Nearby places to Belnie
Also in Belnie
How it works
You don’t need to empty the room. We bring everything we need with us, put protection down and start once you’re happy with the plan. Most jobs take the best part of a day, and you can get on with other things while we are there.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the next day.
Before we arrive
- Avoid using the area for a few hours before we arrive
- Let us know which floor the room is on
- Mention any parking restrictions or tricky access
How to get a price
For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.
Advice
Repairs by material
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Repairs to cracks are reinforced from the back.
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Steel often rusts by the plughole, so we check it carefully.
Our work in Belnie
Belnie is about 5 miles north of Spalding, in Lincolnshire. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We work in 732 places across Lincolnshire, from the larger towns to small villages. Our nearest city page is Birmingham, about 78 miles away.
All of PE11 is within our area. Close by, we cover Wargate (1 mile west), Gosberton (1 mile north-west), Surfleet Seas End (1 mile south-east), Westhorpe (2 miles west) and Surfleet (2 miles south). We also work in nearby towns such as Boston (9 miles north-east), Spalding (5 miles south), Sleaford (15 miles north-west), Bourne (12 miles south-west), Holbeach (8 miles south-east) and Austerby (12 miles south-west).
Around Belnie
Typical jobs here are in homes near Church of St Peter and St Paul, The Bell pub and Gosberton Academy. Belnie’s nearest station is Spalding station, about 5 miles south of the centre. Further afield, we also cover the area around The Spalding Bulb Museum (2.6 miles south).
What bath re-enamelling costs
Prices start from £350. Every quote is fixed and free. What we take into account:
- How easy the damage is to reach
- What the surface is made of
- Whether we combine several jobs
- Unusual colours or finishes
What it costs depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. We give a fixed quote from your photos, so there are no surprises on the day.
Getting a price from photos
Two or three clear photos are typically enough. It helps if you send:
- A coin or ruler next to the damage for scale
- One sharp close-up of the damage
- Any details about the material
- Good light, ideally daylight, without flash glare
Getting a price is easy: take a close-up of the damage and a picture from further back, send them to us with your postcode, and we will reply with a fixed quote. There is no charge for the quote and you are under no obligation.
When to call us in Belnie
Older baths frequently have several problems at once: worn patches, chips, rust spots and stains. Re-enamelling deals with all of them in one go.
Common reasons people in Belnie contact us are:
- A period or roll-top bath worth keeping
- Thin, worn enamel in places
- A bath in a colour that no longer suits
- A peeling or bubbling previous coating
Comparing quotes
- Who will actually do the work
- How to look after the finish
- The length of the guarantee and what it covers
- How changes to the job are handled
Aftercare tips
Most damage we see is avoidable. A few tips:
- Never use suction bath mats
- Get any chip repaired quickly
- Clean with a soft cloth and mild detergent
- A dripping tap should be fixed promptly
Dry the bath after use if possible, and rinse off any bath products.
Don’t try to scrub a worn bath back to shine. It just wears the enamel further and makes resurfacing more work.
Questions from Belnie
What if the damage is worse than the pictures show?
It’s rare, but if it happens we talk to you first. You decide whether to go ahead.
Can you change the colour of my bath?
Yes, white is the usual choice. Mention the colour you want when you send photos.
Is the work guaranteed?
Yes, for a year. If there is a problem with the work in that time, we come back and put it right.
Does someone need to be in?
Yes. We need access to the room while we work, at a time we agree with you.
Do you cover Belnie?
Yes. We cover the entire UK and travel to Belnie. Send us pictures for a fixed quote, or call 0345 017 0787.
Can I get a quote without a visit?
In nearly every case. We only ask to see it in person if the pictures cannot show what we need.
Can a failed resurfacing be redone?
In most cases. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.
Is it safe with children and pets around?
Just keep them out of the work area. We will let you know when it’s safe to use again.
About our accreditations · Every repair comes with a one-year guarantee.
