West Berkshire · England
Bath chip & crack repair in Wash Water, West Berkshire
Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Wash Water, with a one-year guarantee on every repair.
- Repairs from £95
- Damage beneath the taps
- Holes from dropped items
How we handle bath repair in Wash Water
You do not need a new bath because of a chip. We fill the damage, shape it to the curve of the bath and refinish it, mixing the colour on the day. We work on pressed steel enamel, cast iron enamel and acrylic, and people most often call us about hairline or through cracks in acrylic and holes from dropped items.
We stand behind the work with a one-year guarantee, so you are covered after the visit.
- Location
- Wash Water (RG20)
- County
- West Berkshire
- Cover
- A year, on every repair
- Price
- From £95. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Aftercare tips
To keep it looking its best:
- Store metal items away from the bath
- Keep abrasive pads and gritty cleaners away from the bath
- Check that an acrylic bath does not move when you stand in it
- Rinse it down after each bath
Clean with mild, non-abrasive cleaners and try not to drop heavy bottles on the repair. Get any new chip seen to quickly, before rust sets in.
Tape over a fresh chip or crack until it’s repaired, to keep water out. Remove it before the repair.
Common problems we fix in Wash Water
The usual cause is something heavy dropped into the bath, and a lot happen during bathroom refits. Acrylic baths crack for a different reason: the bath isn’t properly supported, so it flexes under weight.
Most people get in touch after spotting one of these:
- Damage beneath the taps
- Chips caused by builders
- A cracked acrylic bath
- A hole punched through by something heavy
What your quote should include
- Whether a trained technician does the job
- How soon you can use it again
- What happens if they find more damage
- Whether they match the colour on site
Covering Wash Water
Wash Water is about 3 miles south-west of Newbury, in West Berkshire. Whether you’re in the middle of Wash Water or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Our repair technicians cover all 155 towns and villages across West Berkshire. We work right across the region, from Wash Water to London (55 miles away).
Every address in RG20 is covered. From Penwood Road and Andover Road or anywhere nearby, we can come to you. If you’re just outside Wash Water, we cover Enborne Row (1 mile north-west), Wash Common (1 mile north-east), Newtown Common (1 mile east), Penwood (1 mile south-west) and Woolton Hill (1 mile south-west). Further out, we also cover Newbury (3 miles north-east), Thatcham (5 miles north-east), Burghfield Common (13 miles east), Speenhamland (3 miles north), Hungerford (8 miles north-west) and Calcot (14 miles east).
Landmarks near Wash Water
Typical jobs here are in homes near The Woodpecker pub, Sandleford Priory and Park House School and the streets around them. Also close by are St Luke Church (1 mile north-east), Falkland Primary School (1 mile north) and Horris Hill School (0.8 miles east). The nearest railway station is Newbury station, about 2.5 miles north-east. Other landmarks nearby include British Balloon Museum & Library Ltd (2.8 miles north-east) and Hamstead Marshall 2 (2.9 miles north-west). The countryside around Wash Water includes Sidown Hill and Audrey's Meadow.
Prices and what affects them
Repairs from £95. Prices are worked out job by job. What matters most is:
- What kind of damage it is
- How many items we do on one visit
- Unusual colours or finishes
- Previous DIY repairs that have to come out
We don’t add extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Quotes from your photos
Phone pictures are fine, there is no need for anything special. Ensure they show:
- Where you are, by postcode
- The material, if you know it
- Natural light rather than flash
- A picture taken from further back
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them to us. What comes back is a fixed quote, not a guess.
Different materials, different repairs
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Acrylic
Acrylic baths are moulded sheet reinforced underneath. There’s no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.
Repair or replace: which is better?
Swapping a damaged bath for a new one normally involves a plumber, removing the old bath, re-tiling and a new panel and getting rid of the old bath. Repairing it deals only with the damage in one visit. Our bath repair starts from £95. The price reflects the work involved, not your postcode. The full price is agreed before you book.
Why choose Surface Doctor in Wash Water
- No need to remove anything
- Normally one visit, start to finish
- We come to you, anywhere in the UK
- Colour-matched on site
Read our pricing or bath cost comparison.
What happens on the day
We work cleanly and quietly. We protect the area first, then the work takes a few hours. Before we leave, we explain the curing time and the aftercare.
- We protect the bath and the floor around it.
- The damaged area is cleaned, keyed and degreased, and any rust is treated.
- Filler goes in and is sanded flush once it has set.
- We match both the colour and the shine.
- We tidy up and tell you when the bath can be used, normally the following day.
How to prepare
- Let the surface dry out before the visit
- Mention any parking restrictions or tricky access
- Have somewhere for us to park nearby if possible
Get a quote
The quickest way to a price is to send a couple of photos using our quote form or ring us. We will say right away whether it can be repaired.
Read more
Work for landlords and builders
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
We regularly work with letting and managing agents. Just send photos, the address and how to get access and we’ll arrange it.
Nearby places to Wash Water
More services for Wash Water
Should I try a DIY kit first?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
Wash Water questions
I tried a repair kit. Can you fix it?
Yes. We remove the old filler and start again. Mention it when you send pictures.
Is there a guarantee?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
How much does bath repair cost in Wash Water?
Prices start from £95. Because every job differs, we price from pictures. You’ll get a fixed figure before you book.
What happens once I’ve sent pictures?
We come back with a fixed price, normally with dates to choose from. There is no obligation to book.
Can I add another job to the visit?
Of course, and it typically saves money. Just add the extra items to your photos and you’ll get one combined price.
What areas do you cover?
The entire UK, including all of West Berkshire. Just include your postcode and we will confirm dates.
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time that suits you.
How soon can you come?
Your quote comes with available dates. Tell us if you need it done quickly.
About our accreditations · Every repair comes with a one-year guarantee.
