North Yorkshire · England
Bath Re-enamelling in Wass
Problem with your bath in Wass? We put it right where it is, match it on site and guarantee the work for a year.
- Resurfacing from £350
- An old resurfacing that’s failing
- A bath that stays dull however much you clean it
About our bath re-enamelling in Wass
We re-enamel plenty of period and roll-top baths, which are heavy, hard to move and costly to replace. Resurfacing them in place keeps the original bath. We’re frequently asked to fix an outdated colour you’d like to change and a dull, rough surface that won’t come clean, across basins & shower trays, acrylic baths and pressed steel baths.
All our work is covered by our one-year guarantee.
- Where
- Wass (YO61)
- Region
- North Yorkshire
- Cover
- One year on every repair
- Quote
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
What we do, step by step
Visits start with a quick look at the job together. After that, protection goes down around the work area and the work begins. It normally takes most of the day, and we will tell you if anything changes.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures.
How to prepare
- Let us know which floor the room is on
- Have somewhere for us to park nearby if possible
- Clear the area around the damage
How to get a price
The quickest way to a price is to send two or three pictures using our quote form or ring us. We’ll say immediately whether it can be repaired.
Read more
What a repair cannot fix
To be straight with you, there are a few things a repair won’t fix:
- Acrylic that moves when you stand in it
- Anything hidden under an old coating, until we remove it
- A cast iron or steel bath that is cracked right through
If in doubt, send photos and we will say what we think.
Materials we work on in Wass
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
- Cast iron baths
- Pressed steel baths
Keeping it looking good
Most damage we see is avoidable. These habits help:
- A dripping tap should be fixed promptly
- Rinse off hair dye, oils and bath bombs right away
- Do not leave a chip unrepaired
- Store bottles off the bath
Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Repair dripping taps promptly.
If a previous coating is starting to peel, don’t pick at it. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
Should you replace it?
When the bathroom is fine apart from the bath’s finish, re-enamelling is the least disruptive fix. Nothing else is disturbed. Resurfacing from £350, with every job priced individually. The price depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. We give a fixed price from your photos, so there are no surprises on the day.
Why us?
- Colour mixed on the day to match
- Every repair guaranteed for a year
- No extra charge for your area
- No need to remove anything
See our pricing and guide to resurfacing and replacement costs.
Prices and what affects them
Prices start from £350. Every quote is fixed and free. What we take into account:
- Whether we combine several jobs
- The colour and finish to match
- How many areas need work
- Whether it’s a chip, crack, burn or wear
We do not add extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
Getting a price from pictures
Most quotes are done from pictures alone. To help us price it:
- One sharp close-up of the damage
- The postcode, so we can plan the visit
- Any earlier repairs or coatings
- The material, if you know it
For a price in Wass, photos are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Landlords, agents and businesses in Wass
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
For developers and builders, we fix damage before handover, so there is no need to replace a damaged item at the last minute. Several plots can be done in one visit to keep costs down.
Towns and villages near Wass
Also in Wass
About Wass
Wass is about 15 miles south-east of Northallerton, in North Yorkshire. Across the YO61 area, a technician comes to you. We work in 626 places across North Yorkshire. Our nearest city page is Leeds, about 32 miles away.
We cover every part of the YO61 postcode area. Jobs here include addresses on Wass Bank Road and Hambleton Lane and the roads around them. Nearby, we also work in Ampleforth (2 miles south-east), Coxwold (2 miles south-west), Kilburn (3 miles west), Oulston (3 miles south-east) and Husthwaite (3 miles south-west). Within a short drive, we also cover Northallerton (15 miles north-west), Malton (15 miles east), Pickering (15 miles east), Thirsk (8 miles west), Easingwold (6 miles south) and Sowerby (8 miles west).
What’s near Wass
In Wass, that means homes near The Stapylton Arms and St Thomas. Further afield, we also cover the area around Gilling Castle (3.8 miles south-east). Green spaces nearby include Sutton Bank and Gormire Lake.
Common questions in Wass
Does re-enamelling smell?
Yes, while we are applying the finish. Ventilation keeps it down, and it fades as the finish cures.
Do you cover Wass?
Yes, we do. We send a technician to Wass for every job, and the price is the same as everywhere else.
Is a repair better than a new one?
Typically, if the item is otherwise sound. A repair avoids removal and making good. If replacing would be better, we’ll say so.
Do you work for landlords and businesses?
We do, regularly. We can quote for several properties together and work between tenancies.
How long will the bath be out of use?
Most baths are done in a day, ready the day after. We’ll confirm timings when we quote.
How do I book?
Photos of the damage, a photo of the entire bath and your postcode. Then we will agree a date.
Can a failed resurfacing be redone?
In most cases. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.
What areas do you cover?
We work UK-wide, and that includes Wass. Our prices are the same everywhere.
DIY repairs versus a professional job
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is typically cheaper.
Signs you need bath re-enamelling in Wass
Many baths we resurface have simply been well used. The body of the bath is typically perfectly sound.
If you can see any of these, send us a picture:
- A peeling or bubbling previous coating
- A roll-top that is seen better days
- A coloured bath you want in white
- Brown or grey marks that do not clean off
What to look for in a quote
- Whether they match the colour on site
- How to care for the finish
- When it can be used again
- Who turns up on the day
About our accreditations · Every repair comes with a one-year guarantee.
