East Riding of Yorkshire · England
Bath Re-enamelling for Wassand homes
Bath re-enamelling for Wassand, without a refit. Get a fixed price from your photos, then we come to you.
- Resurfacing from £350
- An outdated colour you’d like to change
- Worn patches where water runs and sits
Bath re-enamelling at your home in Wassand
Re-enamelling gives a worn bath a new glossy surface without a refit. It’s the answer when the whole bath is tired rather than one spot. Whether it’s enamel that’s lost its shine and feels rough and stains that won’t shift, we can usually put it right, whatever the material.
Your repair is guaranteed for a year, as with every job we do.
- Location
- Wassand (HU11)
- County
- East Riding of Yorkshire
- Warranty
- One year on every repair
- Price
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
What bath re-enamelling costs
Prices start from £350. Every quote is fixed and free. What we look at:
- How many areas need work
- The material and finish
- Unusual colours or finishes
- Whether old repairs or coatings need taking off
Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.
How to get a fixed price
Most quotes are done from pictures alone. To help us price it:
- One picture of the entire bath
- Daylight if possible, and no flash reflection
- The material, if you know it
- A close-up of the damage, in focus
Getting a price is easy: take a close-up of the damage and a picture from further back, send them to us with your postcode, and we’ll reply with a fixed quote. There is no charge for the quote and no obligation.
How it works
Arrival times are agreed in advance. On site, it takes a full day. We leave the room clean.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
How to prepare
- Tell us if there are stairs or a lift
- Point us to the nearest place to park
- Tell us about parking, stairs or access
Getting a price
Most clients in Wassand get their price from pictures. Tell us what happened and where you are, and we will send back a fixed quote and some dates.
Advice
Where we work around Wassand
Wassand is about 2 miles south-west of Hornsea, in East Riding of Yorkshire. Across the HU11 area, a technician comes to you. Our technicians cover 299 places across East Riding of Yorkshire, from the larger towns to small villages. Our nearest city page is Leeds, about 55 miles away.
Here we cover the HU11 postcode area. Nearby, we also work in Sigglesthorne (1 mile west), Rise (3 miles south-west), Catwick (3 miles west), Little Catwick (3 miles west) and Long Riston (4 miles south-west). We also work in nearby towns such as Beverley (10 miles south-west), Bridlington (13 miles north), Driffield (12 miles north-west), Hessle (15 miles south-west), Cottingham (12 miles south-west) and Hedon (11 miles south).
Landmarks near Wassand
We visit homes around Church of St Giles, The Swan Inn and Hornsea School and Language College and the streets around them. Further afield, we also cover the area around Hornsea Cottage Hospital (2.2 miles north-east). Not far away are Hornsea Mere.
Repairing versus replacing in Wassand
Replacing a cast iron bath is a big job: it’s very heavy, may need breaking up, and the replacement can be costly. Re-enamelling avoids all of it. Our bath re-enamelling starts from £350. What it costs depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. You get a fixed price from your pictures, so you know the cost before booking.
Why book with us
- Nothing taken out or refitted
- Honest advice, even when it means no job
- Most jobs done in one visit
- Colour-matched on site
See our full price list or resurfacing vs replacement cost guide.
FAQs for Wassand
Someone resurfaced my bath and it’s peeling. Can you help?
Normally, yes. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.
Is a repair better than a new one?
Usually, when the rest is in good condition. A repair avoids removal and making good. We will tell you honestly if replacement makes more sense.
Can you repair several things at once?
Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.
Will there be a smell?
There may be a mild smell during the work, which fades afterwards.
I’m a tenant. Can you help?
Of course. Ask your landlord first, and we can send them the quote if that helps.
How quickly can you book me in?
Your quote comes with available dates. Tell us if you need it done quickly.
Do you work in Wassand?
We do. Technicians travel to Wassand from across the region, with no extra charge for travel.
Will the bath be moved?
No. It’s re-enamelled where it stands, so the tiles and taps stay put.
Also near Wassand
More services for Wassand
Honest limits
We won’t take on work that won’t last, so here’s what a repair cannot put right:
- A bath split right through the body
- An acrylic bath that flexes badly underfoot
- Steel that has corroded right through
Send us photos and we will tell you honestly.
Materials we repair
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
DIY repairs versus a professional job
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it won’t stop us repairing it. Just mention it when you send pictures, as it can add time.
Aftercare tips
After the repair has cured, a few habits help it last:
- Stick to gentle, non-abrasive cleaners
- Never use suction bath mats
- Leave the bath for the full curing time before using it
- Repair dripping taps early
Stick to mild, non-abrasive cleaners, do not use suction bath mats, and keep bottles and razors off the surface.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
When to call us in Wassand
Once enamel loses its gloss, it stains more easily, and scrubbing it wears it down further. At that stage, resurfacing is the fix.
Common reasons people in Wassand contact us include:
- Wear marks under the taps
- Stains that won’t shift
- A bath in a colour that no longer suits
- An original cast iron bath that needs restoring
Questions to ask before booking
- What happens if they find more damage
- How soon you can use it again
- A fixed price, and whether VAT is included
- How your room will be protected
Materials and what they mean for the repair
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is the part we put right.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
About our accreditations · Every repair comes with a one-year guarantee.
