East Riding of Yorkshire · England

Bath re-enamelling & resurfacing in Catwick, East Riding of Yorkshire

Full bath re-enamelling and resurfacing at your home in Catwick, with a one-year guarantee on every repair.

  • Resurfacing from £350
  • An original cast iron bath that needs restoring
  • An outdated colour you’d like to change
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath re-enamelling in Catwick

Bath re-enamelling in Catwick without replacing anything

We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. Several coats of finish go on over a bonding primer, once the bath has been cleaned, repaired and prepared. Common call-outs are for a roll-top that’s seen better days and an old resurfacing that’s failing, in basins & shower trays, cast iron baths and pressed steel baths.

The work is covered for a year after we finish. If anything isn’t right, ring us and we’ll come back.

Basin with yellowed glaze resurfaced to a clean white finish
Location
Catwick (HU17)
County
East Riding of Yorkshire
Cover
12 months on all our work
Price
From £350. Free, fixed quote from pictures
Phone
0345 017 0787
Last updated
23 October 2026

Different materials, different repairs

Pressed steel

Steel baths re-enamel well, as long as any rust is dealt with first. Steel often rusts by the plughole, so we check it carefully.

Acrylic

Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.

Should you replace it?

If the bath is sound, re-enamelling is generally much cheaper than replacing it, when you count removal, plumbing, tiling and decorating. It’s much quicker too. Our bath re-enamelling starts from £350. There are no surprise extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.

What you get with us

  • Honest advice, even when it means no job
  • Free fixed quotes from pictures
  • Colours mixed by hand to suit your surface
  • Nothing taken out or refitted

See our full price list or resurfacing vs replacement cost guide.

Your questions about bath re-enamelling in Catwick

I rent my home. Can I book you?

Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged.

What do you need from me?

Send pictures through the quote form or call 0345 017 0787, and we will do the rest.

Do you come to Catwick?

Yes. We cover the entire UK and travel to Catwick and the rest of East Riding of Yorkshire. Send us photos for a fixed quote, or call 0345 017 0787.

Is there a smell?

There is some smell while the coating is applied, which is why we ventilate the bathroom. It fades as the coating cures.

How much does bath re-enamelling cost in Catwick?

Resurfacing from £350. Every job gets a fixed quote from your pictures. Send a close-up of the damage and a wider photo and your postcode.

Can pets and children be at home?

Please keep children and pets out of the room during the visit. The rest of the house is unaffected.

Are you a vetted contractor?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

How durable is a resurfaced bath?

Care for it and it lasts. Avoid abrasive cleaners and suction mats.

Keeping it looking good

Nothing complicated is needed:

  • Get any chip repaired quickly
  • Leave the bath for the full curing time before using it
  • A quick wipe after use keeps limescale away
  • Do not let dyes or oils sit on the finish

A quick rinse and wipe after use helps, particularly where water is hard, so limescale can’t build up.

If a previous coating is starting to peel, do not pick at it. Water gets under it and the damage spreads, so have it stripped and resurfaced.

How the visit works

Arrival times are agreed in advance, so you are not left guessing. On site, it takes the best part of a day for most jobs. The room is left tidy and ready to use once it has cured.

  1. We check the bath and agree the finish with you.
  2. Everything around the bath is masked and covered.
  3. We degrease the bath, fix any damage and key the surface.
  4. Primer and finish coats are applied.
  5. The masking comes off, we tidy up and tell you when it can be used.

Preparing for the visit

  • Keep children and pets away from the room on the day
  • Point us to the nearest place to park
  • Move bottles, mats and clutter away from the area

How to get a price

Pricing is simple: take a close-up of the damage and a photo from further back, send them over with your postcode, and you will get a fixed quote back. There’s no charge for the quote and you are under no obligation.

Get a fixed quote

Related advice

When a repair isn’t the answer

It helps to know what we cannot do too:

  • Steel that has corroded right through
  • An acrylic bath that flexes badly underfoot
  • A cast iron or steel bath that’s cracked right through

If in doubt, send pictures and we’ll say what we think before booking.

Surfaces we repair

  • Victorian roll-tops
  • Cast iron baths
  • Basins & shower trays
  • Acrylic baths
  • Pressed steel baths

DIY kit or professional repair?

A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it does not stop a professional repair. Just mention it when you send pictures, as it can add time.

The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.

Do you need bath re-enamelling in Catwick?

Older baths frequently have several problems at once: dull areas, chips, rust and staining. Re-enamelling deals with all of them in one go.

Keep an eye out for any of the following:

  • An outdated colour you’d like to change
  • Wear marks under the taps
  • An original cast iron bath that needs restoring
  • A bath that stays dull however much you clean it

Questions to ask before booking

  • What prep work is covered
  • How long the guarantee is and what it covers
  • How soon you can use it again
  • How your room will be protected

Our hiring checklist

Where we work around Catwick

Catwick is about 7 miles north-east of Beverley, in East Riding of Yorkshire. Jobs in Catwick are booked in like any other job: a fixed quote from pictures, and a technician at your door on the day. Catwick is one of 299 places in East Riding of Yorkshire where we work. Our jobs stretch from Catwick to Leeds (52 miles away).

Here we cover the HU17 postcode area. Local streets include Main Street, Church Lane and Rise Lane, and we cover them all. Close by, we cover Little Catwick (1 mile south), Sigglesthorne (2 miles east), Long Riston (2 miles south), Arnold (2 miles south) and Rise (2 miles south-east). Further out, we also cover Beverley (7 miles south-west), Bridlington (14 miles north), Driffield (10 miles north-west), Hessle (13 miles south-west), Cottingham (10 miles south-west) and Hornsea (5 miles east).

Local landmarks in Catwick

Locally, our jobs take us to homes close to Church of St Michael. Well-known places in the area include Hornsea Cottage Hospital (4.8 miles east). Not far away are Hornsea Mere.

Map of Catwick © OpenStreetMap contributors

What affects the price in Catwick

Prices start from £350. A fixed quote means you know the cost before you book. We take into account:

  • The material
  • Access to the area
  • Whether we combine several jobs
  • Unusual colours or finishes

Compared with replacing, a repair is typically a fraction of the price, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.

Send photos for a quote

Phone photos are fine, there is no need for anything special. Just make sure we can see:

  • A photo taken from further back
  • Where you are, by postcode
  • A coin beside the damage so we can judge size
  • The material, if you know it

The quickest way to a price is to send two or three photos using our quote form or call us. We’ll say immediately whether it can be repaired.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.