Norfolk · England

Bath Re-enamelling in Wereham

Problem with your bath in Wereham? We put it right where it is, match it on site and guarantee the work for a year.

  • Resurfacing from £350
  • An old resurfacing that is failing
  • A bath in a colour that no longer suits
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath re-enamelling in Wereham

Repair or replace: which is better?

If the bath is sound, re-enamelling is usually much cheaper than replacing it, when you count removal, plumbing, tiling and decorating. It’s much quicker too. Resurfacing from £350, with every job priced individually. The price reflects the work involved, not your postcode. The full price is agreed before booking.

What you get with us

  • Fixed prices from your pictures
  • One visit for most repairs
  • Technicians who travel to you, UK-wide
  • Colour mixed on the day to match

Take a look at our pricing or resurfacing vs replacement cost guide.

Bath re-enamelling in Wereham, done in place

The bath stays where it is, so your taps, tiles and plumbing are left alone. Most baths are done in one visit, with the bath ready to use the following day. Common call-outs are for several chips and rust patches and thin, worn enamel in places, in acrylic baths, cast iron baths and basins & shower trays.

Whatever the size of the job, it’s backed by a one-year guarantee.

Roll-top bath being refinished by a Surface Doctor technician
Area
Wereham (PE33)
County
Norfolk
Guarantee
12 months on all our work
Quote
From £350. Free, fixed quote from pictures
Phone
0345 017 0787
Updated
23 October 2026

Your questions about bath re-enamelling in Wereham

Can you quote from pictures?

Usually, yes. Clear photos let us give you a fixed quote without visiting.

Can you do the outside of a roll-top?

Yes. We can do the inside and outside if you’d like.

Can you fix a peeling bath coating?

In most cases. The old coating comes off before we resurface it. Mention it when you send photos.

Can you repair something that is been repaired before?

Yes, we frequently do. Removing the old work can add time, and that is in the quote.

Do you cover the whole of Norfolk?

All of Norfolk, and the rest of the UK. Travel is included in the price.

Will the new finish last?

A well-prepared finish lasts a long time if it’s looked after. Gentle cleaning, no suction mats.

When can you do it?

We’ll give you dates with your quote. Tell us if you need it done quickly.

I’m a tenant. Can you help?

Yes. Check with your landlord; we can send the quote to them too.

What a repair cannot fix

Honesty matters more than a booking, so here’s what a repair will not do:

  • Acrylic that moves when you stand in it
  • Leaks from fittings rather than the bath
  • A metal bath with a through crack

Not sure? Send photos and we will give you a straight answer before you book.

Materials we repair

  • Victorian roll-tops
  • Cast iron baths
  • Pressed steel baths
  • Basins & shower trays
  • Acrylic baths

What your bath is made of matters

Cast iron

Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so resurfacing gives them a new life.

Acrylic

Acrylic baths can be resurfaced too, using a system that bonds to acrylic. It must be solid and not flex underfoot for the finish to last.

Should I try a DIY kit first?

We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.

If you do try a kit, read the instructions carefully, and give it the full curing time. If it doesn’t work out, we can still repair it properly.

Looking after it afterwards

Once the work has cured, treat it gently:

  • A quick wipe after use keeps limescale away
  • Never use suction bath mats
  • Wash away dyes and oils after use
  • Store bottles off the bath

Avoid hair dye, bath bombs and oils sitting on the surface, as they can stain. Fix dripping taps quickly.

Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface.

How the visit works

A typical visit goes like this: we arrive at the agreed slot, sheet and mask the area around the job, carry out the work and clear up. Plan for most of the day. Before leaving, we tell you when it can be used and what to avoid for the first few days.

  1. We sheet, mask and ventilate the room.
  2. Old sealant is cut out and the bath is deep cleaned.
  3. We repair chips, rust spots and pitting.
  4. The surface is keyed and primed for the new finish.
  5. Several coats of finish are sprayed on, then it cures until the day after.

Before we arrive

  • Have a window or extractor fan available
  • Clear the area around the damage
  • Keep a parking space free if you can

Getting a price

Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can give you a fixed price without visiting.

Get a fixed price

Related advice

Common problems we fix in Wereham

Older baths frequently have several problems at once: worn patches, chips, rust spots and stains. Resurfacing sorts them out together.

Look out for any of the following:

  • A peeling or bubbling previous coating
  • An original cast iron bath that needs restoring
  • Wear marks under the taps
  • Brown or grey marks that don’t clean off

What to look for in a quote

  • What happens if they find more damage
  • What protection goes down before work starts
  • When it can be used again
  • Whether they match the colour on site

Our hiring checklist

Covering Wereham

Wereham is about 12 miles south of King's Lynn, in Norfolk. We travel to clients in Wereham and nearby villages, so nothing has to leave your home. Our repair technicians cover all 797 towns and villages across Norfolk. Our jobs stretch from Wereham to London (about 79 miles away).

Jobs in PE33 work the same way as everywhere else we cover. You will find streets such as Church Road, Crown Gardens and Cavenham Road. Other places close to Wereham include West Dereham (1 mile west), Boughton (1 mile east), Wretton (1 mile south-east), Stoke Ferry (2 miles south-east) and Crimplesham (2 miles north-west). Further out, we also cover King's Lynn (12 miles north), Downham Market (4 miles west), Watton (15 miles east), Swaffham (10 miles north-east), Fairstead (12 miles north) and West Lynn (12 miles north).

Near you in Wereham

Around Wereham, we work in homes near Church of St Margaret and The George And Dragon pub, among other places. The nearest railway station is Downham Market station, roughly 5 miles west of the centre.

Map of Wereham © OpenStreetMap contributors

Landlord and trade work in Wereham

Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.

We work for landlords, letting agents and housing providers in Wereham as well as homeowners. A repair between tenants keeps the property empty for less time, and it typically costs far less than a refit.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.