Norfolk · England

Bath Re-enamelling in Wretton

We travel to Wretton for full bath re-enamelling and resurfacing. Nothing is taken out, with a one-year guarantee.

  • Resurfacing from £350
  • Stains that will not shift
  • Enamel that’s lost its shine and feels rough
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath re-enamelling in Wretton?

Bath re-enamelling at your home in Wretton

Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. Several coats of finish go on over a bonding primer, once the bath has been cleaned, repaired and prepared. Common call-outs are for several chips and rust patches and enamel that’s lost its shine and feels rough, across pressed steel baths, Victorian roll-tops and cast iron baths.

Big or small, you get the same one-year guarantee.

Where
Wretton (PE33)
Area hub
Norfolk
Guarantee
12 months on all our work
Quotes
From £350. Free, fixed price from pictures
Telephone
0345 017 0787
Last updated
23 October 2026
Surface Doctor technician refinishing the outside of a roll-top bath

Landlord and trade work in Wretton

We regularly work with letting and managing agents. Send the address, photos and access details and we’ll arrange it.

We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which is easier on the people living there.

What happens on the day

We turn up at the time we agreed with you, introduces themselves and checks the damage against your photos first. Dust sheets and masking tape go down before any work starts. Most visits take a full day, and the room is left clean and tidy.

  1. We sheet, mask and ventilate the room.
  2. We remove the old silicone and deep clean the bath.
  3. We repair chips, rust spots and pitting.
  4. We key the bath and apply a bonding primer.
  5. Several coats of finish are sprayed on, then it cures until the next day.

Getting ready for the visit

  • Move bottles, mats and clutter away from the area
  • Keep children and pets away from the room on the day
  • Tell us if there are stairs or a lift

Get a quote

You do not need a survey visit. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.

Get a fixed price

Advice

Why repair rather than replace?

Getting a cast iron bath out is hard work: it’s very heavy, may need breaking up, and the replacement can be costly. Re-enamelling avoids all of it. Our bath re-enamelling starts from £350. Set against the cost of replacement, repairing typically costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.

Why book with us

  • Fixed prices from your pictures
  • Generally one visit, start to finish
  • CHAS, Constructionline and SafeContractor accredited
  • Work done at your home or business

Take a look at our prices page and bath cost comparison.

Your questions about bath re-enamelling in Wretton

What happens after I send pictures?

You’ll get a fixed quote back, normally with dates to choose from. There is no obligation to book.

Will it make a mess?

Dust sheets and masking go down before we start, and tidy up before we leave.

How do I get a price for bath re-enamelling in Wretton?

Resurfacing from £350. Because every job differs, we price from pictures. You’ll get a fixed figure before you book.

Do the materials smell?

There may be a mild smell during the work that clears as it cures.

What areas do you cover?

All of Norfolk, and the rest of the UK. Travel is included in the price.

Do I have to be there?

Someone needs to let us in and show us the job. After that, you can carry on with your day.

Can you re-enamel a roll-top bath?

Yes. Inside and out if you’d like.

It’s been repaired before. Can you still fix it?

Yes, we frequently do. It can add a little time, which we include in the quote.

Our work in Wretton

Wretton is about 13 miles south of King's Lynn, in Norfolk. Book a date that suits you, and you’ll know when to expect us, so there’s no waiting around. We work in all 797 towns and villages across Norfolk. We work right across the region, from Wretton to London (78 miles away).

We cover every part of the PE33 postcode area and the streets around it. Local streets include Church Road, Jane Forby Close and Pipistrelle Drive. We also travel to Stoke Ferry (1 mile east), Wereham (1 mile north-west), Boughton (1 mile north-east), Whittington (2 miles east) and West Dereham (2 miles north-west). Within a short drive, we also cover King's Lynn (13 miles north), Thetford (15 miles south-east), Downham Market (5 miles north-west), Watton (14 miles east), Swaffham (10 miles north-east) and Fairstead (13 miles north).

What’s near Wretton

Our customers here include homes close to Church of All Saints and All Saints Academy and the streets around them.

Map of Wretton © OpenStreetMap contributors

When a repair is not the answer

Some problems need a builder, plumber or fitter rather than us:

  • A bath split right through the body
  • Anything hidden under an old coating, until we remove it
  • Steel that has corroded right through

If in doubt, send pictures and we’ll say what we think before you book.

Materials we repair

  • Pressed steel baths
  • Acrylic baths
  • Victorian roll-tops
  • Cast iron baths
  • Basins & shower trays

Can I fix it myself?

We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.

For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.

What your bath is made of matters

Acrylic

Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.

Roll-top and period baths

We can resurface a roll-top inside and out, and the outside can be refinished too.

How to care for the repair

It’s all simple stuff:

  • Leave the bath for the full curing time before using it
  • Avoid suction-cup mats
  • Keep toiletries on a shelf rather than in the bath
  • Stick to gentle, non-abrasive cleaners

A quick rinse and wipe after use helps, especially in hard water areas, to stop limescale building up.

Rust spots on a worn bath get worse with time, and each one adds to the preparation. Resurfacing before they spread keeps it simpler.

When to call us in Wretton

A dull surface stains and holds dirt, and cleaning harder only makes it worse. That’s the point where re-enamelling makes sense.

Send us a photo if you notice any of these:

  • Brown or grey marks that do not clean off
  • A roll-top that’s seen better days
  • An old resurfacing that’s failing
  • Several chips and rust patches

Questions to ask before booking

  • What prep work is covered
  • What the guarantee covers, and for how long
  • How long it needs to cure
  • How changes to the job are handled

How to compare quotes

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.