Cheshire West and Chester · England
Bath Re-enamelling for Wervin homes
Bath re-enamelling across Wervin and nearby, generally in one visit.
- Resurfacing from £350
- Thin, worn enamel in places
- A coating lifting around the plughole
Bath re-enamelling at your home in Wervin
Re-enamelling is a one-day job for most baths. Taps, tiles, panels and plumbing all stay in place. We work on Victorian roll-tops, acrylic baths and pressed steel baths, and the jobs we see most are a coating lifting around the plughole and a coloured bath you want in white.
Your repair is guaranteed for a year, as with every job we do.
- Where
- Wervin (CH2)
- Area hub
- Cheshire West and Chester
- Warranty
- One year on every repair
- Price
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
What a repair cannot fix
Some jobs are not right for a repair, including:
- Leaking taps or wastes (a plumber’s job)
- A cast iron or steel bath that is cracked right through
- Damage hidden under a previous coating, until it’s stripped back
Send us pictures and we will tell you honestly before you book.
Materials we repair
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
- Acrylic baths
Places near Wervin
Other services in Wervin
Should you replace it?
Replacing a bath generally involves a plumber, a fitter and a tiler. Resurfacing is one technician, normally in a day, and the bath can be used the day after. Prices start from £350. Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access.
Why book with us
- No need to remove anything
- One visit for most repairs
- Work done at your home or business
- Honest advice, even when it means no job
Take a look at our pricing and guide to resurfacing and replacement costs.
What happens on the day
From the moment we arrive, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the job takes the best part of a day, depending on what we find, and we finish by cleaning up and talking you through the result.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Preparing for the visit
- Mention if the room is upstairs or in a flat
- Plan for the room to be out of bounds to pets and children
- Tell us about parking, stairs or access
Get a quote
The quickest way to a price is to send two or three photos through our quote form or ring us. We will tell you honestly whether it can be repaired.
Advice
Wervin: your questions answered
Do I need to be at home?
We need someone to let us in. After that, you can carry on with your day.
What does bath re-enamelling cost?
Prices start from £350. Every job gets a fixed price from your photos. Send a close-up of the damage and a wider photo and your postcode.
Is repairing better than replacing?
In most cases, yes. A repair skips the removal, fitting and redecorating. We’ll be honest if it’s not worth it.
Can tenants book a repair?
We’re happy to deal with the tenant, landlord or agent. Just ensure the landlord agrees.
Do you need to take the bath out?
No, it stays where it is. We work on the bath in place, with the room protected and ventilated.
Can pets and children be at home?
Please keep children and pets out of the room during the visit. Everywhere else in the home is fine.
Can you repair several things at once?
Of course, and it generally saves money. Send pictures of everything together and we’ll quote them together.
Which areas do you work in?
We work UK-wide, and that includes Wervin. Our prices are the same everywhere.
Materials and what they mean for the repair
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we pay close attention there.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
What bath re-enamelling costs
Resurfacing from £350. Every quote is fixed and free. What we look at:
- How much damage there is
- The type of damage
- Any earlier repairs that need removing first
- Unusual colours or finishes
The price depends on how much damage there is and what kind, the material and how many items we do on one visit. You get a fixed quote from your photos, so you know the cost before booking.
Send pictures for a quote
The better the photos, the more accurate the price. Here’s what we find most useful:
- A clear, close picture of the problem area
- A picture taken from further back
- Natural light rather than flash
- The postcode, so we can plan the visit
A quote takes minutes to ask for: photograph the damage, then the whole bath, include your postcode and send them to us. You’ll get a fixed quote, not an estimate.
Keeping it looking good
How the surface is treated afterwards matters. Here’s what we suggest:
- Don’t leave bottles, razors or sponges standing on the surface
- Never use suction bath mats
- Respect the curing time we give you
- Have chips seen to early
Use mild, non-abrasive cleaners, don’t use suction bath mats, and keep bottles and razors off the surface.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
Wervin and nearby
Wervin is about 3 miles south-east of Ellesmere Port, in Cheshire West and Chester. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. Wervin is one of 224 places in Cheshire West and Chester we cover. We work right across the region, from Wervin to Liverpool (about 12 miles away).
Postcode districts we cover here: CH2. Nearby, we also work in Croughton (1 mile north-west), Picton (1 mile east), Stoak (1 mile north), Chorlton-by-Backford (1 mile west) and Little Stanney (2 miles north-west). Further out, we also cover Chester (3 miles south), Ellesmere Port (3 miles north-west), Winsford (14 miles east), Northwich (14 miles east), Neston (9 miles north-west) and Boughton (4 miles south).
Local landmarks in Wervin
Typical jobs here are in homes near St Lawrence's Church and Upton-by-Chester High School. The closest station to Wervin is Bache station, about 2.5 miles south-west. A little further out are Cheshire Oaks Designer Outlet (1.8 miles north) and Chester Castle (part) (3.9 miles south). For a walk, there is Gowy Meadows Nature Reserve.
DIY kit or professional repair?
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is normally cheaper.
Do you need bath re-enamelling in Wervin?
Enamel does not fail overnight. Years of cleaning, hard water and hot baths wear the gloss away, generally first under the taps and around the waste.
Most people get in touch when they notice one of these:
- A peeling or bubbling previous coating
- Stains that won’t shift
- Wear marks under the taps
- A coloured bath you want in white
Questions to ask before you book
- Whether the price covers travel
- What prep work is covered
- Whether the colour is mixed to match
- A fixed quote, and whether VAT is included
About our accreditations · Every repair comes with a one-year guarantee.
