Somerset · England
Bath Re-enamelling in West Camel
Damaged bath in West Camel? We repair it in place, match it on site and guarantee the work for a year.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- A period or roll-top bath worth keeping
Why repair rather than replace?
A refit takes several trades and several days. Re-enamelling takes one technician and normally one day, with the bath ready the following day. Prices start from £350. A repair normally costs much less than people expect, particularly next to the cost of replacement. Send photos and we will give you the exact figure.
Why book with us
- Colour-matched on site
- No need to remove anything
- One-year guarantee on every repair
- Same prices wherever you are
See our full price list and resurfacing vs replacement cost guide.
Bath re-enamelling in West Camel without replacing anything
Resurfacing renews the whole surface of the bath without a refit. It’s the answer when the entire bath is tired rather than one spot. Typical jobs include a peeling or bubbling previous coating and an outdated colour you’d like to change, across basins & shower trays, pressed steel baths and acrylic baths.
We stand behind the work with a one-year guarantee, so you’re covered after the visit.
- Where
- West Camel (BA22)
- Area hub
- Somerset
- Cover
- One year on every repair
- Quote
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Covering West Camel
West Camel is about 5 miles north of Yeovil, in Somerset. Book a date that suits you, and you will know when to expect us, so there is no waiting around. We work in 640 places across Somerset.
Postcode districts we cover here: BA22. Local streets include Demelza Court, Back Street and Fore Street, and we cover them all. If you are just outside West Camel, we cover Speckington (1 mile south-west), Podimore (2 miles west), Steart (2 miles north-west), Yeovilton (2 miles south-west) and Babcary (3 miles north). Further out, we also cover Yeovil (5 miles south), Wells (13 miles north), Shepton Mallet (12 miles north), Street (9 miles north-west), Glastonbury (10 miles north-west) and Crewkerne (13 miles south-west).
Local landmarks in West Camel
We visit homes around Church of All Saints, The Walnut Tree pub and Countess Gytha Primary School and the streets around them. A little further out are Haynes Motor Museum (2.5 miles north-east) and Yeovil Hospital (5.3 miles south).
DIY kit or professional repair?
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it doesn’t stop a professional repair. Just mention it when you send photos, as it can add time.
If you do try a kit, read the instructions carefully, and do not use it until it has fully cured. If it does not work out, we can still repair it properly.
How it works
From the moment we arrive, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the job takes a full day, and we finish by cleaning up and talking you through the result.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Preparing for the visit
- Clear toiletries, mats and anything else from around the area
- Have a window or extractor fan available
- Let us know if it has been repaired before
Getting a price
We price from photos so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we’ll come back with a fixed figure.
Advice
What we are called out for in West Camel
The gloss on enamel is thin, and every scrub with an abrasive cleaner takes a little away. After years of use, the surface becomes porous and stains easily.
It’s worth getting a quote if you see:
- A peeling or bubbling previous coating
- Wear marks under the taps
- Stains that will not shift
- Enamel that’s lost its shine and feels rough
What to look for in a quote
- Who will actually do the work
- What happens if they find more damage
- If travel is included in the price
- Aftercare advice
When a repair is not the answer
It helps to know what we can’t do too:
- Leaking taps or wastes (a plumber’s job)
- Steel that has corroded right through
- An acrylic bath that flexes badly underfoot
Send us pictures and we will tell you honestly before you book.
Materials we repair
- Victorian roll-tops
- Cast iron baths
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
Common questions in West Camel
Can tenants book a repair?
We can work for tenants, landlords or agents. Just ensure the landlord agrees.
Can I get a quote without a visit?
Nearly always. If photos don’t show enough, we’ll ask for another angle.
How long is the bath unusable?
Normally one day, with the bath ready the next day. A badly pitted bath can need a second day.
What happens next?
You will get a fixed quote back, generally with dates to choose from. There is no obligation to book.
Will the price change on the day?
It’s rare, but if it happens we talk to you first. The price only changes if you agree.
Can you repair something that’s been repaired before?
Usually, yes. We remove the old repair before doing a new one, so mention it when you send pictures.
Does the bath have to be removed?
No, it stays where it is. We work on the bath in place, with the room protected and ventilated.
How durable is a resurfaced bath?
A well-prepared finish lasts a long time if it’s looked after. Gentle cleaning, no suction mats.
Also in West Camel
Landlords, agents and businesses in West Camel
Letting agents often send us pictures straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
Repairs by material
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Looking after it afterwards
A little care keeps the finish looking good. Our advice:
- Never use suction bath mats
- Use washing-up liquid and a soft cloth
- Don’t use the bath until it has fully cured
- Rinse off hair dye, oils and bath bombs right away
Treat the new finish gently at first: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
About our accreditations · Every repair comes with a one-year guarantee.
