Somerset · England
Bath Re-enamelling for West Yeo homes
Full bath re-enamelling and resurfacing in West Yeo, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- A coloured bath you want in white
- Worn patches where water runs and sits
Landlords, agents and businesses in West Yeo
For developers and builders, we fix damage before handover, so there’s no need to replace a damaged item at the last minute. Several plots can be done in one visit.
We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Bath re-enamelling at your home in West Yeo
We clean, repair and prime the bath before spraying the new finish. The preparation is what makes it last, so we do not cut corners on it. Typical jobs include several chips and rust patches and a roll-top that’s seen better days, across pressed steel baths, basins & shower trays and acrylic baths.
The work is covered for a year after we finish. Just call us if there’s a problem and we will come back.
- Location
- West Yeo (TA7)
- County
- Somerset
- Guarantee
- A year, on every repair
- Price
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Signs you need bath re-enamelling in West Yeo
The gloss on enamel is thin, and every scrub with an abrasive cleaner takes a little away. After years of use, the surface becomes porous and stains easily.
Send us a photo if you notice any of these:
- Chips and rust in more than one place
- A bath that stays dull however much you clean it
- A period or roll-top bath worth keeping
- Brown or grey marks that don’t clean off
What to look for in a quote
- Who will actually do the work
- What prep work is covered
- If travel is included in the price
- A fixed price, and whether VAT is included
What bath re-enamelling costs
Prices start from £350. There is no charge for travel to West Yeo. The price depends on:
- What the surface is made of
- Whether old repairs or coatings need taking off
- What kind of damage it is
- Unusual colours or finishes
Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.
Quotes from your photos
The better the photos, the more accurate the price. Here’s what we find most useful:
- A coin or ruler next to the damage for scale
- Good light, ideally daylight, without flash glare
- Whether it’s been repaired or coated before
- The postcode, so we can plan the visit
To get a price, send a couple of photos using our quote form or call us. We’ll tell you honestly whether it can be repaired.
Common questions in West Yeo
How long is the bath unusable?
One day for most baths and can be used the day after. We’ll confirm timings when we quote.
Are there extra charges for West Yeo?
We don’t add a call-out fee. Your fixed price includes everything.
When can you do it?
Your quote comes with available dates. Tell us if you need it done quickly.
Can tenants book a repair?
Of course. Ask your landlord first, and we can send them the quote if that helps.
Do you do work for letting agents?
Yes. We work for landlords, agents, builders and businesses as well as householders in West Yeo.
Do the materials smell?
It depends on the job, but frequently a little. Ventilation keeps it to a minimum.
Can a failed resurfacing be redone?
In most cases. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
Are you a vetted contractor?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Nearby places to West Yeo
Other services in West Yeo
How to care for the repair
How the surface is treated afterwards matters:
- Have chips seen to early
- Wash away dyes and oils after use
- Keep suction mats out of the bath
- Stick to gentle, non-abrasive cleaners
The first few days matter most: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
Do not try to scrub a worn bath back to shine. It removes more of the surface and makes resurfacing more work.
DIY kit or professional repair?
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send photos.
West Yeo and the surrounding area
West Yeo is about 4 miles south-east of Bridgwater, in Somerset. We travel to homes and businesses in West Yeo and nearby villages, so you don’t need to take anything anywhere. Our technicians cover 640 places in Somerset.
Postcode districts we cover here: TA7. We also cover the places around West Yeo: Burrowbridge (1 mile east), East Lyng (1 mile south), Athelney (1 mile south-east), Andersea (1 mile north) and Lyng (2 miles south). We also work in nearby towns such as Taunton (8 miles south-west), Bridgwater (4 miles north-west), Chard (14 miles south), Burnham-on-Sea (11 miles north), Wellington (14 miles south-west) and Street (10 miles east).
Local landmarks in West Yeo
Typical jobs here are in homes near Church of St Peter and St John and the streets around them. For rail, the closest station is Bridgwater station, roughly 4.1 miles north-west. A little further out are Willows and Wetlands Visitor Centre (2.2 miles south) and Bridgwater Castle (4.5 miles north-west). The countryside around West Yeo includes Burrow Mump and West Sedgemoor RSPB reserve.
What your bath is made of matters
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. It must be solid and not flex underfoot.
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Steel frequently rusts by the plughole, so we pay close attention there.
What we cannot put right
To be straight with you, there are a few things a repair won’t fix:
- A bath that’s rusted through
- Problems we can’t see until an old finish comes off
- An acrylic bath that flexes badly underfoot
If in doubt, send photos and we will say what we think.
What we work on
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
The process
Arrival times are agreed in advance, so you’re not left guessing. Once we’re there, the work takes the best part of a day in most cases. The room is left tidy and you’ll know when it can be used.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Mention any earlier repairs or resurfacing
- Keep children and pets away from the room on the day
- Mention if the room is upstairs or in a flat
Getting a price
There’s no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed quote.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
